Beli Zkg Tank bekas (12.872)

Kondisi: baik (bekas), jarak tempuh: 724.875 km, daya: 330 kW (448,67 hp), pendaftaran pertama: 09/2021, jenis bahan bakar: diesel, ukuran ban: 315/70R22,5, konfigurasi gandar: 4x2, jarak roda: 3.700 mm, bahan bakar: diesel, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, jumlah gigi: 12, kelas emisi: Euro 6, suspensi: baja-udara, panjang total: 6.200 mm, lebar total: 2.550 mm, tinggi total: 3.660 mm, Tahun pembuatan: 2021, Perlengkapan: ABS, Bluetooth, kendali jelajah, kontrol traksi, kunci sentral, pemanas jok, pemanas parkir, pendingin udara, pengaturan jendela elektrik, sistem navigasi, spion elektrik,

Kondisi: bekas, jarak tempuh: 513.000 km, daya: 355 kW (482,67 hp), pendaftaran pertama: 02/2020, jenis bahan bakar: diesel, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Perlengkapan: ABS, pemanas parkir, pendingin udara, sistem navigasi,

Kondisi: bekas, jarak tempuh: 448.000 km, daya: 309 kW (420,12 hp), pendaftaran pertama: 02/2010, jenis bahan bakar: diesel, berat keseluruhan: 27.500 kg, konfigurasi gandar: 3 gandar, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, Tahun pembuatan: 2010, Perlengkapan: ABS, pemanas parkir, pendingin udara,

Kondisi: bekas, Tahun pembuatan: 2002, Tangki baja tahan karat ganda Roth, 2 x 30,015 liter. Kondisi: Baik Rjdpezmakmjfx Ad Recd Lokasi Tambahan: E1

Kondisi: bekas, Tahun pembuatan: 1989, Dimensi (P x L x T): 850 x 290 x 310 cm Tangki bahan bakar: 15.000 liter Nomor seri: 1 Kapasitas tangki: 15.000 liter Jumlah roda: 2 Pompa vakum PTO (Power Take-Off) tersedia Dudukan penopang hidraulik Putaran mesin penuh Lampu jalan Katup penutup hidraulik di bagian belakang Termasuk perangkat penyemprot Dimensi keseluruhan: 8.500 × 2.900 × 3.100 mm Catatan: Terdapat tanda-tanda penggunaan Redszqai Dopfx Ad Rscd

Kondisi: bekas, Tahun pembuatan: 1990, Tangki bahan bakar: 8000 liter Nomor seri: 1 Jumlah roda: 2 Ukuran ban: 14.00R20 Kapasitas tangki: 8000 liter Pompa vakum Rjdpjzqah Tjfx Ad Rscd Katup hidrolik belakang PTO (Power Take-Off) tersedia Rem hidrolik Sambungan depan: Kiri + Kanan Termasuk 1 selang Catatan: Terdapat tanda-tanda penggunaan.

Kondisi: baru, Tahun pembuatan: 2026, EN_AIR_TANK_270L_HIGH_QUALITY_PRESSURE_VESSEL_FOR_COMPRESSED_AIR _SYSTEMS Key Advantages of the 270 L Pressure Vessel - Professional-grade pressure vessel – manufactured from high-quality 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. - Operating pressure of 11 bar – suitable for most pneumatic systems, including those with higher requirements. - High capacity – 270 litres – enables reliable supply to the pneumatic installation and reduces compressor start frequency. - Multi-connection port system – five ports with diameters of 1", 2", and 1/2" allow flexible integration into various systems. - High-quality workmanship – durable anti-corrosion coating on both the interior and exterior surfaces of the tank. - Universal installation position – vertical design saves space at the facility. Design and Technology – Robust Construction for Demanding Applications This compressed air tank is engineered for intensive industrial use. The body is made from structural steel with a 4 mm wall thickness, ensuring resistance to pressures up to 11 bar and long service life. All welds are subject to rigorous quality control, and the tank surfaces are protected by a chemical- and weather-resistant anti-corrosion coating. Rsdpfoxbzaljx Ad Rjcd The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for operation in both Polish and European markets. The package includes comprehensive technical documentation, a pressure vessel passport, and material certificates. Standard Equipment - Connection ports: 5 pcs – diameters: 1", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Kondisi: baru, Tahun pembuatan: 2026, AIR RECEIVER TANK 500 L – PREMIUM QUALITY PRESSURE VESSEL FOR COMPRESSED AIR INSTALLATIONS Main advantages of the 500 L pressure vessel: - Professional pressure design – constructed from high-grade 4 mm steel, resistant to both pressure and corrosion. - UDT Certification and CE Marking – compliant with European safety and quality standards. - Working pressure of 11 bar – suitable for the majority of pneumatic systems, including those with increased requirements. - High capacity – 500 litres – enables stable supply to the pneumatic installation and reduces the frequency of compressor start-ups. - Multi-connection system – 6 ports with diameters of 1.1/4", 2", and 1/2" allow for flexible integration with various installations. - High-quality workmanship – durable anti-corrosion coating applied to both the internal and external surfaces. - Universal installation position – vertical design enables space savings in the facility. Construction and technology – robust design for demanding applications This compressed air tank is engineered for heavy-duty use in industrial environments. The body is made of 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and long-term operation. All welds undergo rigorous quality control, and the tank surfaces are protected with an anti-corrosion paint resistant to chemicals and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both Polish and European markets. The delivery includes complete technical documentation, a passport, and material certificates. Redpfxjxby D Ae Ad Rscd Precision and work efficiency – stable pressure and optimal compressor usage With its large 500-litre capacity, the tank serves as an air buffer, stabilising pressure throughout the entire pneumatic system. This ensures consistent operation of compressed air-powered equipment and significantly extends compressor lifespan by reducing the number of start/stop cycles. The vertical configuration allows for compact installation, which is particularly important in facilities with limited space. A properly selected tank for the compressor minimises pressure drops and prevents overloading of the pneumatic system, resulting in enhanced efficiency and safety of the entire installation. Standard equipment: - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE marking - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Kondisi: baru, Tahun pembuatan: 2026, Complete set including LUFT 1000 rotary screw compressor with inverter, vertical compressed air tank with accessories (capacity 270 L), and IZBERG N10S dryer. The LUFT series rotary screw compressor by the Polish brand CORMAK features state-of-the-art solutions in pneumatics, utilizing high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. LUFT 1000 INVERTER Technical Specifications: - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Air delivery 0–6 bar: 990 L/min - Air delivery at 6 bar: 950 L/min - Air delivery at 8 bar: 950 L/min - Air delivery at 10 bar: 930 L/min - Outlet connection diameter (G): 1/2'' - Dimensions: 810 x 610 x 850 mm - Weight: 160 kg IZBERG N10S Air Dryer Technical Specifications: - Inlet/outlet pipe diameter (BSP): 1'' - Max operating pressure: 10 bar - Max inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type and quantity: R134a, 400 g CORMAK vertical air receiver, 270 L, 11 bar working pressure – a reliable solution for compressed air storage in industrial facilities, workshops, and pneumatic installations. The robust steel construction, full compliance with EU directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the receiver can function as both a storage buffer and a stabilizing element for compressor operation. Key advantages of the CORMAK 270 L air receiver: - Professional pressure vessel design – manufactured from premium-grade, 4 mm thick steel, resistant to pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. Rcodpfxexazlrs Ad Rjd - 11 bar working pressure – suitable for most pneumatic systems, including those with increased demands. - High capacity – 270 liters – ensures stable supply to pneumatic installations and reduces compressor start frequency. - Multi-connection system – five connection points in 1.1/4'', 2'', and 1/2'' diameters enable flexible integration with different setups. - High quality finish – durable anti-corrosive coating inside and outside the tank. - Universal installation position – vertical design allows space-saving installation in your facility.

Kondisi: baru, Tahun pembuatan: 2026, Are you looking for a professional solution to power pneumatic tools in your workshop, paint shop, or small production line? The CORMAK LUFT 700 screw compressor is the ideal choice. With a 5.5 kW motor and an impressive effective output of up to 690 l/min, it ensures a steady supply of compressed air essential for the efficient operation of impact wrenches, blow guns, or spray painting equipment. This model is designed for continuous operation, making it perfectly suited for demanding applications such as tyre services, small automotive workshops, or small-scale manufacturing facilities. Investing in a CORMAK screw compressor is a step towards significantly improving work comfort—say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 700 stands out with its direct drive system, providing significantly higher efficiency and lower power loss compared to belt-driven models. This innovative solution guarantees optimal use of the motor's power, resulting in greater performance with reduced energy consumption. This screw compressor is capable of generating a maximum pressure of 10 bar. Complete control over all operating parameters is provided by the intuitive MAM electronic control panel, giving you access to key compressor information, enhancing flexibility and process management. Are you seeking solutions that exceed industry standards? CORMAK screw compressors are synonymous with innovation and reliability, engineered for the most demanding applications. The combination of a proven, reliable induction motor and intelligent control makes this screw compressor an extremely efficient, economical, and flexible source of compressed air, perfectly suited to the dynamic needs of modern industry. High-class CORMAK screw compressors, such as the LUFT 700 model, are built around advanced screw modules, which define their performance and reliability. By relying on proven solutions and innovations, Cormak ensures every module is refined to the smallest detail, meeting the requirements of even the most intensive applications. Rjdjza Aptspfx Ad Rjcd In CORMAK screw compressors like the LUFT 700, a crucial element ensuring reliability and operational optimisation is the advanced MAM control panel. Designed for efficient management of compressed air systems, this controller enables real-time monitoring and rapid response to all operating parameters. Technical specifications: Motor power: 5.5 kW Voltage: 400V/50Hz Output at 0–6 bar: 690 L/min Output at 6 bar: 650 L/min Output at 8 bar: 650 L/min Output at 10 bar: 630 L/min Outlet port diameter (G): 1/2" Dimensions: 1445 x 610 x 1410 mm Weight: 200 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Screw compressors from the Polish brand CORMAK guarantee quality and reliability. Our many years of experience in compressor sales have enabled us to create models that offer an excellent price-to-performance ratio. The presented model is ideal for small workshops or small manufacturing businesses. It is characterized by high efficiency (380 l/min) relative to its compact size, allowing for the simultaneous operation of several devices. The very low noise level (60 dB) ensures that working in the same room is not problematic. Are you looking for an efficient and reliable compressor, suitable for smaller workshops, service points, or hobby applications, while also requiring single-phase power? The CORMAK LUFT 400 screw compressor is the perfect solution. With a 3.0 kW motor and an impressive actual performance of up to 400 l/min, it provides a constant supply of compressed air, essential for the effective operation of impact wrenches, blow guns, or spray painting tools. Rodpfoza Al Ujx Ad Rocd The LUFT 400 stands out with its reliable direct drive system, eliminating vibrations and the need to maintain belt transmissions. This proven solution ensures stable operation and long service life, providing direct power transfer from the motor to the screw module. The maximum pressure generated by this screw compressor is 10 bar. Full control over the device's operating parameters is ensured by the intuitive MAM series electronic control panel, which provides access to key compressor information, increasing flexibility and process control. Permanent Magnet Motors (PM Motors) are an innovative approach in electric drives, offering significant advantages compared to traditional induction motors. The inverter, also known as a frequency converter, is an advanced electronic device that has revolutionized the operation of screw compressors. Its use allows for smooth adjustment of the compressor motor's speed according to the current demand for compressed air. High-quality Cormak screw compressors, such as the LUFT 400 model, are based on technologically advanced screw modules, which are the foundation of their efficiency and reliability. By combining proven solutions and innovations, Cormak ensures that each module is refined to the smallest detail to meet even the most demanding operational requirements. In Cormak screw compressors like the LUFT 400, a key element ensuring reliability and optimal operation is the advanced MAM series control panel. Designed for effective management of the compressed air system, this controller enables real-time monitoring and rapid response to all working parameters. Technical Specifications Motor power: 3.0 kW / 4 HP Voltage: 230V/50Hz Performance at 0-6 bar: approx. 400 L/min Performance at 6 bar: 390 L/min Performance at 8 bar: 380 L/min Performance at 10 bar: 380 L/min Outlet connection diameter (G): 1/2" Dimensions: 1130 x 520 x 1300 mm Weight: 170 kg

Kondisi: baru, Tahun pembuatan: 2026, Screw Compressor CORMAK LUFT 700 VSD+PM Compact with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. 500 L horizontal compressed air receiver. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series are equipped with Permanent Magnet (PM) motors. Unlike conventional induction motors: They achieve efficiency levels in accordance with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (where standard motors lose their efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive (VSD) Control The core of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in an ‘all-or-nothing’ (load/unload) mode. If your machine only requires 30% output, the compressor reduces its speed, proportionally lowering energy consumption. Elimination of idle running: Conventional compressors often continue to run idle for several minutes after the receiver is filled, consuming approx. 25–30% of their rated power without producing compressed air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means no sudden current surges during startup, which: Protects the plant’s electrical installation. Enables frequent starts and stops without risk of winding overheating. 4. Real Savings In practice, using the Energy Saver line can reduce electricity costs by 30% to 50% compared to conventional fixed-speed compressors. Additionally, the system keeps network pressure extremely stable (accuracy up to 0.1 bar), which is essential for precision equipment such as laser cutters. Longer lifespan: The absence of sudden pressure and temperature fluctuations extends the screw element’s operating life. Technical specifications Motor power 5.5 kW / 7.5 HP Voltage 400V/50Hz Output at 0–6 bar average 690 L/min Redpfx Adsycg Ryo Rocd Output at 6 bar 690 L/min Output at 8 bar 650 L/min Output at 10 bar 650 L/min Outlet connection diameter (G) 1/2" Dimensions 1840 x 640 x 1470 mm Weight 320 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, A set including a LUFT 700 screw compressor, N10S refrigerant air dryer, and a 500L compressed air receiver. The LUFT series screw compressor from the Polish brand CORMAK offers the latest pneumatic solutions combined with top-quality materials and components. Its low operating costs, user-friendly operation, ergonomic and robust design, and high device efficiency guarantee effective and trouble-free operation. Additional dual filtration at the dryer! SET INCLUDES: LUFT 700 SCREW COMPRESSOR N10S REFRIGERANT AIR DRYER 500L AIR RECEIVER Technical Specifications - LUFT 700 COMPACT Compressor: Motor power: 5.5 kW Dryer: Motor power: 0.29 kW General parameters: Performance at 0-6 bar: 680 l/min Performance at 6 bar: 650 l/min Performance at 8 bar: 650 l/min Rcsdpfx Aerh E Ersd Rod Performance at 10 bar: 620 l/min Outlet: G3/4" Overall dimensions: 1250 x 600 x 895 mm Weight: 380 kg The quoted price is NET. Price does not include transport costs. For more information, please contact us by phone or email. Feel free to view our full offer on our website.

Kondisi: baru, Tahun pembuatan: 2026, Complete set including LUFT 1500 screw compressor with inverter, vertical 1000 L air receiver with accessories, and IZBERG N20S dryer. The CORMAK LUFT series screw compressor from the Polish brand CORMAK incorporates state-of-the-art solutions in pneumatics, paired with the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust construction, and high performance ensure efficient and trouble-free operation. Technical specifications LUFT 1500 INVERTER: - Motor power: 11 kW - Voltage: 400V/50Hz - Output at 0-6 bar: 1620 L/min - Output at 6 bar: 1580 L/min - Output at 8 bar: 1350 L/min Rcsdpfx Adexnyhue Rsd - Output at 10 bar: 1230 L/min - Outlet connection diameter (G): 1" - Dimensions: 1170 x 730 x 1020 mm - Weight: 243 kg Technical specifications IZBERG N20S: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Flow rate: 2800 l/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 420 x 700 x 690 mm - Weight: 37 kg - Type and quantity of refrigerant: R134a, 550 g Technical specifications 1000L VERTICAL AIR RECEIVER: - Weight (kg): 230 - Connections: 6 - Connection size: 2", 1/2" - Size: 230 x 80.8 cm - Tank capacity (l): 1000 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 808 - Height (mm): 2300

Kondisi: baru, Tahun pembuatan: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with dryer – a compact set for demanding applications - ENERGY SAVER THE SET INCLUDES: LUFT 1500 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. HORIZONTAL COMPRESSED AIR RECEIVER, 500 L. Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series are equipped with Permanent Magnet motors. Compared to conventional induction motors: They offer efficiency compliant with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (standard motors lose efficiency outside their nominal range). Are more compact, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency inverter (variable speed drive). Rcsdpfxoychbaj Ad Rjd Demand-driven operation: The compressor does not operate in a simple "all-or-nothing" (load/unload) mode. If your machine requires only 30% output, the compressor reduces its speed, consuming proportionally less energy. Elimination of idling: Conventional compressors often continue running for several minutes after the tank is filled, drawing about 25–30% of nominal power while not producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This results in no sudden current surges at startup, which: Protects the electrical installation in your facility. Allows for more frequent starts and stops without the risk of winding overheating. 4. Genuine Energy Savings In practice, implementing the Energy Saver line enables a reduction of electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Moreover, the system maintains extremely stable network pressure (accurate to 0.1 bar), which is crucial for precision equipment such as laser cutters. Extended lifetime: The absence of rapid pressure and temperature fluctuations extends the screw element’s operating life. Technical specifications Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: 1620 L/min Free air delivery at 6 bar: 1580 L/min Free air delivery at 8 bar: 1350 L/min Free air delivery at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Weight: 500 kg

Kondisi: baru, Tahun pembuatan: 2026, CORMAK LUFT 700 VSD+PM Compact Rotary Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Rotary Screw Compressor with integrated dryer 270 L horizontal compressed air receiver tank Key features that distinguish these models: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They achieve efficiency in line with IE4 or even IE5 standards. Maintain high efficiency even at very low speeds (standard motors lose efficiency outside their nominal range). Are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) At the heart of the Energy Saver range is the frequency inverter (VSD). Adaptation to demand: The compressor does not operate in an "all or nothing" load/unload system. If your machine only requires 30% output, the compressor reduces speed and uses proportionally less energy. Elimination of idle running: Conventional compressors often continue running for a few minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means no sudden current surges at startup, which: Redpfx Ajycg I Sed Rjcd Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Genuine Savings In practice, using the Energy Saver range allows you to reduce electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains highly stable network pressure (accurate to 0.1 bar), which is crucial for precision equipment such as laser cutters. Increased longevity: No sudden spikes in pressure or temperature, resulting in longer rotary screw unit service life. Technical specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0–6 bar: average 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Kondisi: baru, Tahun pembuatan: 2026, A set including the LUFT 700 VSD+PM screw compressor, a vertical 200 L air receiver with fittings, and an IZBERG N10S dryer. The CORMAK LUFT series screw compressor, from a Polish manufacturer, features the latest advancements in pneumatics combined with high-quality materials and components. Low running costs, ease of operation, ergonomic and robust design, and high performance ensure reliable and trouble-free operation. Rcodjyguq Ajpfx Ad Rod Technical specifications of the compressor: - Motor power: 5.5 kW / 7.5 HP - Voltage: 400V / 50Hz - Output at 0-6 bar (average): 690 L/min - Output at 6 bar: 690 L/min - Output at 8 bar: 650 L/min - Output at 10 bar: 650 L/min - Outlet connection diameter (G): 1/2" - Dimensions: 800 x 520 x 740 mm - Weight: 95 kg Technical specifications of the IZBERG N10S air dryer: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type and quantity: R134a, 400 g Technical specifications of the 200 L pressure vessel: - Weight: 80 kg - Connections: 6 - Connection sizes: 1/2", 1", 2" - Size: 166.5 x 45 cm - Vessel capacity: 200 L - Working pressure: 11 bar - Wall thickness: 4 mm - Diameter: Ø 450 mm - Height: 1665 mm Included accessories: - 1/2" plug – 2 pcs. - 1/2" nipple – 1 pc. - 1/2" tee – 1 pc. - 1/2" to 1/4" reducer – 1 pc. - 1/4" pressure gauge – 1 pc. - 1" to 3/4" reducer – 2 pcs. - 1/2" ball valve – 1 pc. Note: A safety valve is not included in the kit. It must be supplied separately by the user.

Kondisi: baru, Tahun pembuatan: 2026, Set includes LUFT 700 VSD+PM rotary screw compressor, vertical 200 l compressed air receiver with fittings. The CORMAK LUFT series rotary screw compressor, produced by the Polish brand CORMAK, features state-of-the-art pneumatic solutions combined with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high performance ensure efficient and trouble-free operation. Technical specifications of the compressor: Motor power: 5.5 kW / 7.5 HP Voltage: 400V / 50Hz Capacity at 0-6 bar (average): 690 L/min Rodpfx Aoyguirsd Recd Capacity at 6 bar: 690 L/min Capacity at 8 bar: 650 L/min Capacity at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 800 x 520 x 740 mm Weight: 100 kg Technical specifications of the 200 L pressure vessel: Weight: 80 kg Connections: 6 Connection sizes: 1/2", 1", 2" Dimensions: 166.5 x 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Attention!!! The safety valve is not included in the supplied accessories and must be provided by the user.

Kondisi: baru, Tahun pembuatan: 2026, A set comprising a LUFT 1000 screw compressor with frequency inverter, a vertical 500 L compressed air receiver with accessories, and an IZBERG N10S dryer. The CORMAK LUFT series screw compressor, produced by the Polish brand, incorporates the latest innovations in pneumatics combined with high-quality materials and components. Low operating costs, user-friendly service, ergonomic yet robust design, and high device efficiency ensure reliable and trouble-free operation. Technical specifications – LUFT1000 INVERTER: - Motor power: 7.5 kW - Voltage: 400V/50Hz - Capacity at 0–6 bar: 990 L/min - Capacity at 6 bar: 950 L/min - Capacity at 8 bar: 950 L/min - Capacity at 10 bar: 930 L/min - Outlet port diameter (G): 1/2" Rcsdoxa Ah Uopfx Ad Rod - Dimensions: 810 x 610 x 850 mm - Weight: 160 kg Technical specifications – IZBERG N10S air dryer: - Inlet/outlet pipe diameter (BSP): 1" - Maximum working pressure: 10 bar - Maximum inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Capacity: 1500 L/min - Power: 0.58 kW - Supply voltage: 230V - Dimensions (L x W x H): 380 x 600 x 625 mm - Weight: 31 kg - Refrigerant type/quantity: R134a, 400 g Technical specifications – 500L air receiver: - Weight: 145 kg - Connections: 6 - Connection size: 1.1/4", 2", 1/2" - Dimensions: 209.8 x 60 cm - Tank capacity: 500 L - Working pressure: 11 bar - Wall thickness: 4 mm - Diameter: Ø 600 mm - Height: 2098 mm

Tahun pembuatan: 2002, Kondisi: sangat baik (bekas), DANTECH/OMEGA ice water cooler for glazing Rcedpfehg Tryox Ad Rod Capacity: 700 liters Tank dimensions: 131 x 90 x 60 cm Overall dimensions: Length: 215 cm Width: 105 cm Height: 270 cm Ready for operation.

Kondisi: bekas, jarak tempuh: 158.175 km, daya: 301 kW (409,25 hp), pendaftaran pertama: 09/2004, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: oranye, tipe perpindahan gigi: mekanis, kelas emisi: Euro 3, lebar total: 2.550 mm, tinggi total: 3.850 mm, Perlengkapan: ABS, pendingin udara,

Kondisi: bekas, jarak tempuh: 118.000 km, daya: 265 kW (360,30 hp), pendaftaran pertama: 04/2019, jenis bahan bakar: diesel, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, warna: merah, tipe perpindahan gigi: mekanis, kelas emisi: Euro 6, Tahun pembuatan: 2019, Perlengkapan: ABS, pendingin udara,

Kondisi: baru, daya: 184 kW (250,17 hp), pendaftaran pertama: 02/2023, jenis bahan bakar: diesel, ukuran ban: 14.00R20, konfigurasi gandar: 4x4, jarak roda: 4.500 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 300 l, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 4, suspensi: baja, volume ruang muat: 10 m³, Tahun pembuatan: 2023, Perlengkapan: AdBlue, pendingin udara,

Kondisi: baru, daya: 294 kW (399,73 hp), pendaftaran pertama: 02/2023, jenis bahan bakar: diesel, ukuran ban: 315/80R22.5, konfigurasi gandar: 6x4, jarak roda: 3.900 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: euro2, suspensi: baja, volume ruang muat: 20 m³, Tahun pembuatan: 2023, Perlengkapan: pendingin udara,

Kondisi: baru, daya: 294 kW (399,73 hp), pendaftaran pertama: 02/2023, jenis bahan bakar: diesel, ukuran ban: 315/80R22.5, konfigurasi gandar: 6x4, jarak roda: 3.900 mm, bahan bakar: diesel, kapasitas tangki bahan bakar: 400 l, warna: putih, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: euro2, suspensi: baja, volume ruang muat: 20 m³, Tahun pembuatan: 2023, Perlengkapan: pendingin udara,