Beli Zett Berantakan Teknologi Gmbh bekas (86.453)

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 54.050 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, kapasitas tangki oli: 2.100 l, daya: 94 kW (127,80 hp), berat kosong: 21.000 kg, Technical Data – Baler: Manufacturer: Paal Model: Konti 275 E Year of manufacture: 2006 Total operating hours: 54,050 hours Main press force: 80 t at 300 bar Specific press force: 9.7 kg/cm² Feeding chute dimensions: 1,600 x 1,020 mm (L x W) Throughput under operating conditions: 350 m³/h Bale dimensions: 750 x 1,100 mm, length variable Drive power: 75 kW Total connected load: 94 kW Rated current: 180 A Tying system: 4-fold vertical, fully automatic Bale weights: up to 750 kg, depending on material Hydraulic oil tank volume: 2,100 L PLC (Make/Type): Siemens Simatic S7-300 Control panel (Make/Type): Siemens Multi Panel Transport dimensions press only: 11,152 x 2,152 x 3,000 mm (L x W x H) Press weight approx.: 21 t Condition of baler with conveyor: The baler and conveyor are in a satisfactory, operational condition, see photo documentation. Further technical data and dimensions for the conveyor are currently not available. The plant is currently still in operation and will be replaced in the coming months by a larger baling system. Scope of supply: Baler, bale slide, conveyor belt and machine documentation. Remarks: Gedpfx Ajxcxm Esdtstt The documentation (operating manual, CE, electric/hydraulic circuit diagrams) is complete. An inspection is possible by arrangement. Dismantling and loading is the responsibility of the buyer. We do not accept liability for the technical data or for possible errors.

Kondisi: bekas, lebar total: 13.500 mm, tinggi total: 4.500 mm, panjang total: 30.500 mm, Angewendete Verfahren: - Nickel - Chrom - Nickel-Phosphor - Schwefelsäurebeize Software: Gsdpfx Ajv Umkyjdtott - ICOM Automation GmbH

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 35 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 87 mm, panjang total: 120 mm, berat muatan maksimum: 200 kg, kapasitas pemanasan: 7,2 kW (9,79 hp), kapasitas tangki: 400 l, masa garansi: 24 bulan, jenis arus masuk: tiga fasa, tinggi dalam: 600 mm, panjang dalam: 800 mm, lebar dalam: 500 mm, berat keseluruhan: 150 kg, tegangan masuk: 400 V, frekuensi input: 50 Hz, berat benda kerja (maks.): 200 kg, LCT NW 180 BSS demonstration tank Gtodpfeq Rd R Djx Adtst Dual frequency 27/80 kHz Stainless steel control cabinet with ventilation Hinged cover Tank fully insulated Stainless steel wash basket with four crane lugs and a lifting rod Four adjustable feet for uneven floors Bottom drainage via valve with inclined tank floor for complete emptying Bottom grate Bottom and 2x side-mounted transducers with a total output of 3000 watts Time switch with timer and program control Connected load: 10.2 kW

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, lebar track: 3.000 mm, jangkauan kerja: 6.000 mm, lebar total: 3.800 mm, panjang total: 11.000 mm, tinggi produk (maks.): 70 mm, ketinggian potong (maks.): 60 mm, Mesin pemotong plasma Lind dengan alat pemotong HiFocus 360I Hypertherm termasuk KWE 360, PGV 3. Meja pemotongan dengan sistem penyedot lengkap. Unit siap pakai dalam kondisi prima. Demonstrasi dimungkinkan. Harga baru € 190.000,00. Unit tersedia segera. Harga berlaku untuk keputusan pembelian hingga akhir November! Pembongkaran dapat dilakukan pada Januari 2026. Gedjwmq Tzspfx Adtstt

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical data baling press / can compactor / sheet metal press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput (empty beverage cans): - with one press stroke: approx. 1.7 t/hour - with two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1200 kg/m³ Hydraulic oil tank capacity: 850 l Gedpfju Th S Sex Adtstt Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing sheet metal cans, sheet metal offcuts, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition—see the functional video after the overhaul—and is sold with a 12-month OBM parts warranty. Remarks: Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection is possible by appointment. We do not accept liability for the technical data or potential errors.

Kondisi: bekas, Bekas Moeschle tangki penyimpanan vertikal kapasitas total sekitar 4.900 liter, terbuat dari stainless steel 304. Unit berukuran kira-kira 1.000 mm sisi lurus x 2.200 mm diameter. Tangki ini memiliki kepala atas dan bawah berbentuk dish yang dilas. Dipasang pada 3 kaki. Gedpfx Adex Tibqotstt Spesifikasi: Kapasitas: 1.295 gal Diameter: 7,22’ Tinggi: 3,28’ Jenis kepala: dish atas dan bawah dilas Posisi: vertikal Jenis stainless steel: 304 Kaki/Lug: 3

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 1.000 mm, lebar benda kerja (maks.): 800 mm, tinggi benda kerja (maks.): 400 mm, kecepatan spindel (min.): 1.000 rpm, kecepatan spindel (maks.): 36.000 rpm, Sangat cocok untuk: Penggilingan 3D dengan efisiensi tinggi untuk komponen kecil – penggilingan presisi dengan output bagian yang tinggi Material: Plastik, material komposit seperti CFK/GFK, material untuk model, aluminium Industri: Otomotif, dirgantara, transportasi & logistik, industri rekreasi, sanitasi, pembuatan kapal, otomasi _____ Nomor referensi: 1218 Ketersediaan: Maret 2026 Model: Mesin CNC Milling 5-Sumbu RT-F 1400 Data spindle: 8 kW / 6,4 Nm; 1000-36000 rpm; HSK E 40 Gerak rapid X/Y/Z: 40/40/30 Ukuran benda kerja X/Y/Z: 1000 x 800 x 400 Kontrol: SIEMENS – Sinumerik One dengan HT 2 Penukar alat: 12 alat Meja: 1 meja putar Kontrol patah & panjang alat: Renishaw-TS 27 R Lain-lain: wadah serpihan, pijakan plat berlubang Gjdpfx Adoxdwndetjtt Tahun produksi: 2026 Kondisi: baru

Tahun pembuatan: 2026, Kondisi: baru, Extruder 30 mm with mounted hot die face cutter, the stainless steel housing is swiveling. Gedpjf Uc Ugofx Adtjtt The granulate cut length is continuously adjustable. Optionally, we offer a conveyor belt for cooling the granulate.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The LCT bio.x C100 brush washing table is the proven classic with a new design and optimized device technology. It impresses with its exceptional stability and load-bearing capacity. The spacious work surface allows for barrier-free and comfortable operation. - Robust construction - Especially low maintenance - High load capacity - Energy-saving mode for idle periods such as nighttime or weekends - A flexible articulated hose enables easy rinsing of parts - Optimal cleaning performance by heating the cleaning fluid to 41 °C Gtedeh S Undjpfx Adtet Workpieces are rinsed via a nozzle. The flexible articulated hose allows the nozzle to be fixed in the desired position. The cleaning brush assists in cleaning heavily soiled parts. The large cleaning surface allows for efficient work. The high load capacity of the washing table is ensured by its sturdy device construction. The unit is made of plastic, making it very stable and corrosion-free. Easy transport with pallet trucks. Multi-stage filtration system consisting of a coarse sieve, fine sieve, and magnet. Additionally, a washable filter bag (fineness: 100 μm) retains even the finest contaminants before they enter the bath. A functional control unit with a soft-touch control panel provides about 50% energy savings when the energy-saving mode is selected. All electronic components are combined in a compact technical unit. Our LCT bio.x C100 can be operated with the following label-free cleaning agents: LCT Bio Liquid LCT Bio Liquid Spezial LCT Bio Liquid Power LCT Coconut Cleaner LCT Coconut Cleaner Alu LCT Coconut Cleaner Low-Foam

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Alat kombinasi untuk pengolahan pelat: Mesin Notching + Gunting Tuas Tangan + Mesin Bending Bulat dioperasikan secara manual Mesin Notching, data teknis: Panjang potong: 100 mm x 100 mm Ketebalan pelat: 4 mm Gsdpfjxqgkzex Adtjtt Gunting Tuas Tangan, data teknis: Panjang potong: 300 mm Ketebalan pelat maks. untuk ST37: 3 mm Diameter bulat maks.: 13 mm Mesin Bending Bulat, data teknis: Lebar maks.: 200 mm Ketebalan pelat maks.: 1 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2025, Technical data of the baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 h (as of December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: approx. 6.0 t/h - 50 kg/m³: approx. 10.5 t/h - 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant base made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small grain size - Control cabinet air conditioning - Machine stand increased by 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced: • Dismantling of the press ram, disassembly into individual components, servicing of the mechanics, replacement of the following plastic wear rails and plates: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Replacement of steel guide rails left/right at the top of the frame • Replacement of the complete base plate, four-part, made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Replacement of the counter knife, two-part, in the frame • Adjustment of the knife clearance to approx. 2.5 mm • Dismantling of tying and twisting unit, disassembly into individual components, servicing of the mechanics, replacement of all deep groove ball bearings and axial bearings on the twisting shafts, cleaning and adjustment of the wire knives, chains greased and tensioned • Support roller in front of twisting shafts renewed • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for tightness • Hydraulic oil is only one year old, was chemically analyzed, is still in good condition and was therefore not changed, but can continue to be used • General maintenance carried out Finally, the baler was subjected to a machine test in manual and automatic mode, see video for machine function test. Gtodpfjx A U Ncsx Adtet

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 527 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 05-9473, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.100 mm, jarak gerak sumbu Z: 60 mm, tinggi total: 2.000 mm, panjang total: 1.600 mm, lebar total: 3.800 mm, kecepatan rotasi (maks.): 12.000 rpm, tegangan masuk: 400 V, This machine is a grinding and drilling center (manufacturer's designation: stone cutting machine). The machine is configured as a vertical machining center in a gantry design. The frame consists of a welded steel tubular construction. The drilling head is mounted vertically. Angle adjustment of the drilling head is not possible in any axis. Mounting of tools with horizontal axes can be achieved using the supplied angle grinder attachment. The tool can be moved linearly in 3 axes: x, y (horizontal), and z (vertical). The machine table is fixed and not movable. The machine is used for: - Creating cut-outs, forming round edge profiles, - Producing drip surfaces or drip grooves, polishing surfaces, polishing edges, and drilling natural stone slabs. Additionally, the machine features: - an angle grinder attachment Gtodpfsw Upzfjx Adtot - a compressed air connection (to generate vacuum for clamping devices and for blowing out the drill spindle) - a water connection (for cooling tools and workpieces during processing) Machine data: Manufacturer: Martin Kolb Maschinenbau - Model: Genius 2500 - Serial number: 05-9473 - Year of manufacture: 2005 - Max. working area: 2,500 x 1,100 mm - Max. workpiece thickness: 60 mm - Drive power (main drive): 6 kW (400V / 50 Hz) - Spindle speed: 0 - 12,000 rpm (frequency controlled) - Tool holder: 1/2 inch thread - Max. drilling diameter: up to 100 mm Various accessories such as milling cutters and other tool holders are also included.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 12.000 rpm, kecepatan spindel (maks.): 36.000 rpm, cnc-maschinen-rtf-1400-2026 Gtsdex S Etmspfx Adtet

Tahun pembuatan: 2026, Kondisi: baru, PMH strand pelletizer, type SG10 compact machine with two drives for intake and cutting rotor, designed for a single strand with a maximum diameter of 3.5 mm. Godpfx Ajkyt T Sodtjtt

Kondisi: baru, Tahun pembuatan: 2025, de-2024-06-13-01 Gtjdpfx Aehcpbbodtst

Kondisi: baik (bekas), Power converter, power supply, power unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Quantity: 1 piece available -Price: per unit -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/unit Gedpfx Asffwpaodtstt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 5.612 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 550 kg, tinggi total: 2.800 mm, berat keseluruhan: 12.000 kg, tinggi transportasi: 2.800 mm, kapasitas tangki oli: 300 l, daya: 30 kW (40,79 hp), laju aliran volumetrik: 332 m³/jam, Technical Data for the Baler: Manufacturer: HSM GmbH + Co. KG Model: VK 4812 Year of manufacture: 2014 Operating hours: 5,612 hours as of August 2025 Main press force: 48 t Specific pressing force: 58.2 N/cm² Feed hopper dimensions: 1,250 x 1,020 mm Theoretical cycle time: 11.2 seconds Theoretical throughput: 332 m³/hour Bale dimensions: 1,100 x 750 x 600 to 1,200 mm Drive power: 30 kW Total connected load: 32 kW Rated current: 59 A Tying: 4-fold horizontal, fully automatic Throughput rates depending on bulk density: - At 20 kg/m³ up to 6 t/hour (material dependent) - At 50 kg/m³ up to 13 t/hour (material dependent) Bale weight: up to 550 kg (material dependent) PLC control: Siemens SIMATIC S7-200 Operator panel: Siemens HMI Touch Panel Hydraulic tank capacity: 300 L Oil type: HVI 46 Machine installation dimensions with bale chute: 10,046 x 4,387 x 2,705 mm (L x W x H) Transport dimensions of baler: 8,500 x 2,500 x 2,750 mm (L x W x H) Machine weight (baler): approx. 12 t Scope of Delivery: - HSM VK 4812 baler, without hydraulic oil, without conveyor technology Gtodpfxjvtpq Ho Adtst - Two wire spool boxes for 8 units of 40 kg wire spools, without wire - Bale chute - Machine documentation in German Remarks: The baler is equipped with an oil cooler and volt-free contacts for external control. Operation at the control cabinet is on the left in pressing direction; the needle unit is located on the right side and can be folded backwards for transport. The baler has been partially overhauled and tested in our workshop, see photos and our function video. Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Inspection by appointment. We cannot accept liability for technical data or possible errors.

Tahun pembuatan: 2025, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 800 kg, panjang total: 120 mm, lebar total: 900 mm, tinggi total: 1.900 mm, daya laser: 30 W, panjang gelombang laser: 1.064 nm, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is now indispensable in many industries. The powerful laser software allows you to easily create texts, numbers, 2D codes, QR codes, and logos without extensive programming knowledge—just a few clicks are needed. The software can automatically increment serial and article numbers after initial setup. Additionally, it can import data (variable information such as drawing numbers, project names, etc.) from existing spreadsheets and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral arms for marking long workpieces, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064 nm Godpfx Adsxuvk Estjtt • Marking field size 150x150 mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (including activated carbon filter) • Optional: autofocus system – automatic focus distance measurement • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal lamp indicating operating status • Maximum component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable screen and keyboard tray • Frame made of aluminum profiles • Air cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2025, panjang pemakanan sumbu X: 80 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 60 mm, 1 Godpfx Adjx S Eqletott

Tahun pembuatan: 2026, Kondisi: baru, Extruder 30 mm - 28 L/D Gtsdpfoi Tu U Usx Adtet with die for welding wire extrusion or profile extrusion with cooling bath with haul-off device with water stripper (air knife) with winder and traversing device

Tahun pembuatan: 2025, Kondisi: baru, LCT bio. X A 100 small parts cleaner with biological basis, including 80 liters of LCT Bio Liquid cleaning fluid Bag filter Gsdpeffhnlefx Adtstt Magnet for metal chip separation Washable pre-filter Cleaning temperature is a comfortable 41°C Environmentally friendly Long service life of the cleaning agent Requires little space Additional options available: Filter housing with washable nylon filter V2A stainless steel insert plate to protect the plastic surface Trolley

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The LAS 22 is a compact desktop unit with a small working area, making it ideal for marking small components. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The device is very easy to operate, even without programming knowledge. With the powerful laser software, text, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after initial setup. Additionally, the software is capable of importing data (such as variable information like drawing numbers, project names, etc.) from existing tables and transferring it automatically into predefined fields. A hand scanner can also be integrated. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. - Fiber laser 30 Watt (Option: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm Gtedpfxjwkpxks Adtst - Weight: approx. 45 kg

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The extruder model EX20-25d is designed for laboratory scale applications and achieves a plasticizing capacity of 5 kg/h. Gedpfx Aeiv H Ekjdtott This extruder can be used for material development, small batch production, or as a filament extruder. As standard, this extruder model is supplied with a bimetallic barrel and a fully hardened screw for high temperatures (up to 400°C). This allows the processing of abrasive materials, technical plastics, PEEK, metal compounds, ceramics, and fiber-reinforced materials, among others. Available machines can be inspected at our facility in Königswinter. We also realize other machine dimensions—please contact us for further information.

Kondisi: baru, Tahun pembuatan: 2025, d-001 Gedpjffqi Usfx Adtstt

Kondisi: baru, Tahun pembuatan: 2025, de-to-hu-it-lt-lv-nb-nl-pl Gtodpfx Adsg Hgcwstst