Sistem osmosis terbalik

MWT

Tahun pembuatan: 2022, Kondisi: baru, Suction conveyor with two suction belts Vacuum individually adjustable Speed up to 160 m/min Continuously variable speed control Height adjustable Dodsch Hcaspfx Abhskh Also available in other lengths Inkjet base

Tahun pembuatan: 2018, Kondisi: bekas, 2-vessel brewhouse mounted on a stainless steel frame as a brew block. This setup consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and draining the mash. Independent control of the thermo-oil heated jackets and bottom. The double-walled vessel is clad with insulation and features a polished interior surface. The top-mounted motor drives the cutting and stirring unit with stepless speed regulation. For lautering, there is a multi-piece perforated false bottom and a rectangular side manway for spent grain removal. Additionally, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spraying unit. - Stainless steel wort kettle/whirlpool. The vessel is double-walled and features welded heating zones in both jacket and base, heated with thermo-oil. It is also insulated and equipped with a temperature probe, hinged lid, CIP cleaning head, spray unit, height-adjustable locking mechanism, and a tangential wort inlet for knockout. The inner surface is polished. - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. The wort from one brew can thus be cooled within approximately one hour. Plates are made of stainless steel 1.4401 (AISI 316) and seals are EPDM. The wort chiller features a PT1000 temperature sensor. - Thermo-oil heater to heat the laser-welded heating zones of the brew vessels. Approximately 50-65 liters of oil are electrically heated in the thermo-oil tank to a maximum of 150°C. A safety switch automatically stops heating when 160°C is exceeded. The vessel is equipped with temperature and level sensors. A pump circulates the thermo-oil in a closed loop. - 12 hl hot water tank, standing separately on three legs, with a manway on top. The tank is heatable, insulated, and equipped with a hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with a motor power of 0.37 kW and stepless speed control. - Stainless steel piping and manual valves for redirecting product flows. Pipes are orbitally welded with polished inner surfaces. - Control unit with 10” touchscreen and PLC for brewhouse automation, housed in a stainless steel control cabinet. The following processes can be controlled and monitored: 1. On/off of agitator and cutting unit, and speed control. 2. Temperature control of mash/lauter tun. 3. Temperature control for kettle/whirlpool (separate for jacket and base). 4. On/off for product and CIP pump and speed control. 5. Display of inlet water temperature. 6. Display of wort temperature at outlet. 7. Temperature control of the thermo-oil tank. 8. Timer settings. 9. Mash program settings (multi-step mashing with up to 5 rests; adjustable times, temperatures, agitator and pump speeds). 10. Hot water tank temperature. Machine (additional): Compact brew block with hot water tank Max. wort output: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / control: control cabinet with PLC and touchscreen Material: stainless steel 1.4301 (AISI 304) Dedpfxjw Tbmds Abhjkh Base structure: brew block on stainless steel frame, hot water tank separate Equipment: mash/lauter tun; wort kettle/whirl...

Tahun pembuatan: 2024, Kondisi: baru, Suction conveyor with two suction belts Vacuum individually adjustable Speed up to 160 m/min Continuously variable speed control Height adjustable Also available in other lengths Dsdpfxshl H Ike Abhokh Inkjet base

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, 6-station gripper machine, overhauled in 2024 completely new PLC machine control system (no Pitney control unit) operation via color touch panel Dkjdpfx Abodyk Saehsh electronic gripper controls program expandable at any time and customizable according to customer requirements various reading systems can be integrated roll ejector with programmable divert bin 1-year warranty

Tahun pembuatan: 1997, Kondisi: diremajakan ulang (bekas), 2 pieces process design volute casing pumps 1 unit fully overhauled; pump and motor bearings replaced with new ones. Mechanical seal overhauled by specialist company. All gaskets replaced. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: Double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: Closed two-channel impeller Impeller diameter: 277 mm Bearing type: Rolling bearing Impeller side: 1x NU411 Dsdpfx Absiuznujhjkh Drive side: 2x 7311 Lubrication type, drive side: Oil Oil level monitoring for lubrication Materials: Pump casing: Duplex stainless steel Noridur 1.4593 (9.4460) Wear plate: Duplex stainless steel Noridur 1.4593 (9.4460) Discharge cover: Duplex stainless steel Noridur 1.4593 (9.4460) Shaft: Tempered steel C45+N Impeller: Duplex stainless steel Noridur 1.4593 (9.4460) Bearing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex stainless steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Nominal pressure (suction): PN 10 Nominal pressure (discharge): PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated power (P2): 7.50 kW Insulation class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is particularly suitable for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, 6-station envelope inserting machine with gripper Dodjhl H Irjpfx Abhjkh Completely overhauled in 2022 PLC controlled Color touch panel for operating guidance All types of reading systems can be integrated

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, 6-station gripper machine, overhauled in 2024 completely new PLC machine control (not Pitney control) operation via color touch panel Dodpodyk Sdofx Abhekh electronic gripper monitoring program can be expanded at any time and adapted to customer requirements various reading systems integrable reel discharge with programmable divert bin 1-year warranty

Tahun pembuatan: 2017, Kondisi: bekas, en-to-de-001 Dedpfxsuf H Axo Abhskh

Kondisi: bekas, Electronic Crane Scale MWT Type 142 Serial No.: 142571 Year of Manufacture: 1993 Tension Force Measuring Device, Crane Scale Measuring Range: 2,500 to 80,000 kg Smallest Measured Value: 20 kg Dsdpfx Aog D H Risbhekh Power Supply via 12 Volt Battery - Suspension shackle for double hook, anchor hook - Operation, data storage, and tare function via remote control - Memory for measured values (weights) - Printer for printout of measured values Extremely robust and high-quality steel housing Net weight: approx. 200 kg

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TET351P5-offAD-Bypass - 2200373733, kapasitas pendinginan: 66 kW (89,73 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.082 kg, suhu lingkungan (maks.): 46 °C, suhu lingkungan (min.): -5 °C, tegangan masuk: 400 V, tekanan: 6 batang, suhu: 7 °C, laju aliran volumetrik: 11,2 m³/jam, tekanan pompa: 4,68 batang, lebar total: 866 mm, panjang total: 2.250 mm, tinggi total: 2.054 mm, masa garansi: 3 bulan, frekuensi input: 50 Hz, Perlengkapan: Pelat tipe tersedia, Air-cooled process chiller / chiller unit Dkjdpswlt Raofx Abhsh Model: TAEevo Tech 351 P5-offAD-Bypass Manufacturer: MTA S.p.A. Chiller, cold water unit; cooler The TAEevo Tech 351 P5-offAD-Bypass is a compact, air-cooled water chiller suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special equipment: - Open filling system / tank mounted - Manual valve bypass between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Connection: Rp 2" Serial no.: 2200373733 Year of construction: 2021 Condition: Visual 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have cosmetic defects due to usage. (Technical modifications and prior sale reserved!)