Pusat penggilingan balik CNC

Nakamura-Tome NTJ-100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h Psdjx D Iuzepfx Al Ispr • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: SIEMENS, kecepatan spindel (maks.): 24.000 rpm, daya motor spindle: 35.000 W, jumlah sumbu: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with an X-axis travel of 750 mm, a Y-axis travel of 600 mm, and a Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of 24,000 rpm and a tool magazine with a capacity of 120 positions. It also includes a DMG PH 150 L8 automation system. If you are looking for high-quality machining capabilities, the DMG DECKEL MAHO DMU 70 EVO Linear we offer for sale is an excellent choice. Please contact us for further details. • Feed rate: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping area 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high pressure 40 bar • Documentation: operating manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 l Pjdpfxsymcvmj Al Ijpr • Probe • Chip conveyor • Electronic handwheel (remote control) • DMG PH 150 L8 pallet changer system, 8 stations (pallets not included) Technical Specification Taper size HSK 63

Kondisi: baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.800 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL2561708843, jumlah spindel: 2, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): ø 740 Pjdsyzxcgepfx Al Ispr Bar working capacity (mm): 80 Tool magazines Tool positions: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tool power (kW): 5.5/4.9/4.2 (3 min / 5 min / cont) Rapid traverse (m/min): 30 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/18.5/15 (25% DC / 50% DC / cont) Max. torque (Nm): 49 Counter spindle Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 11/7.5 (25% DC / cont) Max. torque (Nm): 22 Counter spindle travel (mm): 734 Cooling system Tank capacity (liters): 366 Equipment Chip conveyor Signal beacon Machine operating time: Power-on hours: 19,393 Cutting time: 8,800 Nominal power rating (kVA): 48 Base machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Illustrated tools, driven tools, and both chucks are not included in the scope of delivery.

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 1.050 mm, panjang umpan sumbu Y: 360 mm, panjang umpan sumbu Z: 500 mm, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 360 mm, jarak gerak sumbu Z: 500 mm, berat keseluruhan: 3.000 kg, Perlengkapan: dokumentasi / manual, en Pjdpfxerqwbij Al Ispr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jam operasional: 11.574 h, jarak pergerakan sumbu X: 1.525 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 625 mm, tinggi total: 3.235 mm, berat keseluruhan: 13.500 kg, panjang produk (maks.): 5.000 mm, DOOSAN MYNX 7500 II 3-sumbu ini diproduksi pada tahun 2020 dan dilengkapi dengan kontrol Heidenhain TNC 620 serta probe pengukuran TS 460. Mesin ini memiliki ukuran meja 1600 mm x 750 mm dan kecepatan spindle maksimum 12.000 rpm. Dengan dimensi 5000 × 4050 × 3235 mm dan berat 13.500 kg, ini adalah kesempatan yang sangat baik untuk membeli pusat pemesinan vertikal DOOSAN MYNX 7500 II ini. Hubungi kami untuk informasi lebih lanjut. Pjdox U Dtwepfx Al Ijpr • Panjang meja: 1600 mm • Lebar meja: 750 mm • Taper spindle: ISO 40 Double Contact • Kecepatan spindle maksimum: 12.000 rpm Dimensi Kedalaman mesin: 4050 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, CNC turning and milling center (multi-function machine) | Make: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 10.03.2026): - Total: 91,430 h - Auto operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) Psdeyuq Dzjpfx Al Ispr - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Programmable tailstock: - Taper: MT 6 Milling spindle: - Turret type: Single spindle with ATC - Tool holder: steep taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Travel paths: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional information: - Rated power (100% continuous operation): 99.5 kVA Automatic tool changer: - Number of tools: 120 positions, SK50 DIN 69871 EQUIPMENT / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Additional, very good special equipment ... - Documentation - CE marking No guarantee for completeness and accuracy of the technical information and equipment. - Subject to prior sale - Detailed technical datasheet and information about equipment available upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: konveyor serpihan, Opsi: Konveyor serutan keluar kiri, Kontrol suhu cairan pendingin, Spindel 15.000 rpm, Spindel torsi tinggi, Penggaris pada sumbu, Hisap Losma, Pintu otomatis, Kunci engkol lepas, Lampu 3 warna, Rénishaw RMP 600, 5 sumbu kontinu, Fungsi ISO 5 sumbu, Paket performa, Ekstensi memori, Antarmuka robot. Psdpfx Asycr Nusl Ijpr

Kondisi: baik (bekas), Tahun pembuatan: 2007, Mesin bubut bekas OKUMA Ppedsv S Svvspfx Al Ior - Model: LT200-M TwinStar - Tahun: 2007 - Termasuk konveyor serpihan - Tangki pendingin - Siap tersedia segera

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Misinvestment by a corporation. The machine is brand new and unused (already delivered). There are no lead times—immediately available. A truly rare opportunity. Machine type Horizontal Machining Center with Pallet Changer Series NHX 8000 Control Siemens S840Dsl with CELOS Measuring System Fully Closed Scale Feedback (X/Y/Z) Machine Concept DCG Travel X/Y/Z 1,400 / 1,200 / 1,350 mm Rapid Traverse X/Y/Z 50,000 mm/min Pallet System Pallet Changer, Turn-Type Number of Pallets 2 Pallet Size 800 × 800 mm Pedpfjxizdaex Al Iopr Pallet Load 2,200 kg [optional 3,000 kg] Max. Workpiece Ø/H 1,450 mm / 1,450 mm Pallet Change Time 16 s B-Axis Direct Drive Minimum Indexing 0.001° Max. Speed 100 rpm Spindle powerMASTER Speed 16,000 rpm Power 85/50 kW (10% DC / Continuous) Torque 549/279 Nm Mounting HSK-A100 Cooling Centralized Spindle Cooling Internal Cooling optional CTS 7 MPa Tool Magazine Chain Magazine with 60 Stations [optional 100/120] Rack Magazine Options 180 / 240 / 330 Stations Max. Tool Diameter with Adjacent 110 mm Max. Tool Diameter without Adjacent 320 mm [if >10,000 rpm: 230 mm] Max. Tool Length 800 mm Max. Tool Weight 30 kg Tool-to-Tool 1.9 s Cut-to-Cut 5.0 s Equipment / Options Workpiece Probe Tool Measurement System Laser Monitoring optional High-Pressure Coolant 7 MPa optional Chip Conveyor Full Enclosure with Roof Dimensions n.a. Weight n.a. Connection Data n.a.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 6.473 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Specifications: - Control: Siemens 840D - Travel X/Y/Z axis: 730/730/880 mm - C-axis travel: 360° - Rotary table clamping surface: 500 x 500 mm - Spindle speed: 20–15,000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Pallet changer with 2 positions - Automation interface available Equipment: - Internal coolant system, 70 bar with belt filter system - Work area rinsing - BLUM touch probe - Rinsing pistol - Chip conveyor - Signal light - Handheld control device Inspection / Test run on site under power by arrangement possible. We can also offer you transport, installation, and commissioning at your site. Everything from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: Ppjdeyhwpwopfx Al Ior - Service - Maintenance - Overhaul - Automation for DMG machines and other well-known manufacturers. We support you! From machine purchase through transport and installation to commissioning and subsequent maintenance or repair work—you can count on us.