Pusat pembubutan dan milling CNC

Nakamura-Tome Super NTJ 9-Axis Turn/Mill Centre

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), - BEKAS - MESIN BUBUT VERTIKAL CNC DENGAN DUA RAM DIAMETER ROTASI MAKSIMUM: 3000 mm TINGGI PEMBUBUTAN MAKSIMUM: 800 mm DIAMETER PEMBUBUTAN MAKSIMUM: 2800 mm SPINDEL: 1-160 rpm; 71-114 kW; 68500 Nm; 2500 mm JANGKAUAN SUMBU X: -150+1780 mm JANGKAUAN SUMBU Z: 900 mm PERGERAKAN CEPAT SUMBU X-Z: 8 - 10 m/menit MAGAZIN ALAT: TIPE KERANJANG; TIPE CAPTO C5; 24 POSISI UNIT KONTROL: SIEMENS 840D BEBAN MAKSIMUM YANG DIİZINKAN: 15000 Kg BERAT: 54000 Kg Bdodpjyyrh Hofx Ah Hei AKSESORIS: KONVEYOR SERPIHAN; PINTU OTOMATIS; PENGATUR ALAT; SISTEM PENDINGIN SPINDEL; PROBE SENTUH; RODA TANGAN PORTABEL

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis and B-axis, designed for complete machining of turn-mill parts. Features integrated spindle motors (ISM) on both main and sub-spindles, equipped with a thermal compensation system (liquid-cooled). Drive power: Main spindle – 29 kW Sub-spindle – 22 kW Speed range: Main spindle: 0-5000 rpm Sub-spindle: 0-7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (through-bore 65 mm) Sub-spindle: KK 6 Y-axis: Travel range +/- 50 mm The Y-axis is engineered so that resultant cutting forces are distributed across two axes, ensuring extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and bores, a motorized milling spindle with 24-station tool magazine is integrated on the upper slide system. The swiveling range of 210° can be traversed and interpolated continuously. Preloaded roller guides on all linear axes, digital drive system, integrated spindle encoder, and state-of-the-art SINUMERIK 840D CNC control, including: * Hollow clamping cylinder with draw tube * Parts ejector and flushing through the sub-spindle * 12-position VDI 30 turret, radial, with directional logic for up to 12 driven tool stations Swing speed adjustable via feed override Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0-5000 rpm - C-axis for both main and sub-spindle - TRANSMIT software for easy C-axis programming Additional features: * Parts catcher for finished workpieces * Sinumerik 840D * Chip conveyor with programmable discharge height of 1200 mm (hinged belt type) * Coolant unit integrated into chip conveyor - 1x High-pressure pump (14 bar) - 1x High-pressure pump (14 bar), incl. 20 µm fine filter - 2x Flushing pumps (3.7 bar) * Electrical cabinet climate control unit * Electrostatic oil mist separator * Hydraulic power unit * Machine light * Footswitch interface * Documentation Includes: - Handwheel - PC keyboard - Network readiness - Tool monitoring - Turning window - Cleaning pistol Bdjdpfxjxz Ab Re Ah Hji - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401

Kondisi: baru, Tahun pembuatan: 2025, Swing-beam guillotine shear Cutting length: 3100 mm Material thickness (steel): 10 mm Blades suitable for stainless steel Cybelec touchscreen control Backgauge: 1000 mm Cutting gap adjustable via control system Bdjdpfx Ahelac Drs Hoi Delivery time: 3 months

Kondisi: bekas, TECHNICAL DATA Bedpfx Aheuhauyj Hodi - Number of spindles: 6 independent - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - CNC control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - IEMCA SIR MS32/33/P bar feeder - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip evacuation system: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit Bsdox D Iuzepfx Ah Hodi • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), - GEBRAUCHT - 6-ACHSEN-SCHIEBEKOPF-DREHMASCHINE MIT STANGENLADER MAX. DREHLÄNGE: 320 mm MAX. DREHDURCHMESSER: 32 mm SPINDEL: 200-8000 U/min; 3,7 - 7,5 kW Bodpfxovthv Is Ah Hodi GEGENSPINDEL: 200-7000 U/min; 1,5 - 2,7 kW X1-ACHS-VERFAHRWEG: 108 mm X2-ACHS-VERFAHRWEG: 228 mm Y1-ACHS-VERFAHRWEG: 275 mm Z1-ACHS-VERFAHRWEG: 325 mm Z2-ACHS-VERFAHRWEG: 130 mm Z3-ACHS-VERFAHRWEG: 410 mm EILGÄNGE X-Y-Z: 20 m/min ANGETRIEBENER REVOLVERKOPF: 8 STELLUNGEN; 200 - 5000 U/min STEUERUNG: CINCOM SYSTEM M6D STANGENLADER: IEMCA Mod. BOSS 332 EVOLUTION GEWICHT: 2.850 kg ZUBEHÖR: TEILEFÄNGER

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 40.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M086, kecepatan spindel (maks.): 1.500 rpm, kecepatan spindel (min.): 15 rpm, daya motor spindle: 22.000 W, Vertical CNC Turret Lathe Control: FANUC Series 18i-TB Number of turrets: 1 Number of tool stations: 12 Chip conveyor: 3508734 Boring bar holder: dia 50 mm Bdedpjtmq Uksfx Ah Hji The machine is still under power.

Kondisi: baik (bekas), Tahun pembuatan: 2018, Ref.-No.: 10531 Manufacturer: HONOR SEIKI Model: VL - 400CM Year of manufacture: 2018 Control type: CNC control Controller: Siemens SINUMERIK 840D Location: Halberstadt Country of origin: Taiwan Machine No.: 79XXX C-axis: Yes C-axis speed: 50 - 2250 rpm Bdodpfx Ahezx Nx Dj Hsi Turning height: 2370 mm Table diameter: 4000 mm Rapid traverse speed X-axis: 10 m/min Rapid traverse speed Z-axis: 10 m/min Table rotation speed: 1 - 85 rpm Max. workpiece weight: 30 kg Max. turning diameter: 4 mm Distance between faceplate and cross-rail support: 820-3320 mm Working feed: mm/min Number of tools in chain magazine: 24 Crossbeam adjustment: 300 x 300 mm Spindle motor drive: AC 60/75/100 kW Servo motors (X/Z axes): 5.5 / 5.5 kW Machine length: 9 mm Machine width: 7000 mm Machine height: 8000/9100 mm Machine weight approx.: 115 t Additional information: - 2-speed gearbox - ATC (Automatic Tool Changer) 16/20/24 - Tool size 25 x 32 x 40 - Driven tool motor AC15/18.5 The machine is still in ongoing production and can be inspected by appointment.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 10.168 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NL254120635, CNC Drehmaschine - DMG MORI NLX 2500 SY 700 WH10 Automation Bjdpfx Ahjy Szwhe Hodi

Kondisi: siap digunakan (bekas), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Bdsdpfx Ahoi Ew Dps Hei