NAKAMURA-TOME WY 250
NAKAMURA-TOME WY 250

Name: NAKAMURA-TOME WY 250
Brand: NAKAMURA-TOME
Availability: InStock

Tahun pembuatan

2007

Kondisi

Bekas

Lokasi

Italia

NAKAMURA-TOME WY 250 NAKAMURA-TOME WY 250

Data mesin

Nama mesin:: NAKAMURA-TOME WY 250

Pabrikan:: NAKAMURA-TOME

Model:: WY 250

Tahun pembuatan:: 2007

Kondisi:: siap digunakan (bekas)

Harga & Lokasi

Lokasi:: , Italia

Hubungi

Rincian teknis

Jarak pergerakan sumbu X:: 161 mm

Jarak lintasan sumbu Y:: 100 mm

Jarak gerak sumbu Z:: 580 mm

Jumlah sumbu:: 7

Rincian penawaran

ID iklan:: A21886338

Nomor referensi:: IT-TUR-NAK-2007-00002

Pembaruan:: terakhir pada 11.06.2026

Deskripsi

Nakamura Tome WY-250 7-sumbu ini diproduksi pada tahun 2007. Mesin ini dilengkapi dengan konfigurasi spindle ganda dengan kemampuan sumbu Y pada kedua turret, yang memungkinkan pemesinan serbaguna. Mesin ini memiliki jarak gerak maksimum sumbu Z sebesar 580 mm dan jarak gerak sumbu Y sebesar mm. Jika Anda mencari fungsi pembubutan berkualitas tinggi, pertimbangkan Nakamura Tome WY-250 mesin bubut horisontal yang kami tawarkan untuk dijual. Silakan hubungi kami untuk detail lebih lanjut.

• Jarak gerak:
• X1: 160,5 mm
• X2: 165 mm
• Z1/Z2: 580 mm
• Y1: mm
• Y2: / mm
• Alat yang disertakan:
Bjdpfjy N Spcjx Ad Redf
• 4x dudukan alat eksternal
• 4x dudukan alat untuk penempatan simultan 2 alat berlawanan
• 6x dudukan boring bar
• Dudukan alat bertenaga (HEIMATEC):
• 4x radial
• 4x aksial
• Dudukan collet (Bellegrandi):
• Spindle utama: MSCNT70-A6" untuk collet ukuran 70 BA dan BD, lengkap dengan cup terkait
• Subspindle: MSCTNR70-A5" untuk collet ukuran 70 BA, lengkap dengan ejector pegas

Peralatan tambahan

• IEMCA Master 880/33/P Barfeeder (2003), S/N: 0200347S03
• Aplikasi: Majalah pemasukan batang otomatis untuk mesin bubut CNC
• Kapasitas:
• Panjang batang maksimum: 3300 mm (perlu konfirmasi)
• Diameter batang maksimum: hingga Ø80 mm (referensi keluarga model)
• Saluran pemandu: Ø65 mm termasuk; Ø70 mm saat ini terpasang dan dapat dikirim bersama mesin
• Fitur: Pemuatan/feeder otomatis, sinkronisasi dengan siklus pembubutan, kompatibel dengan sistem collet spindle/saluran pemandu, rangka kokoh
• Catatan: Dijual bersama Nakamura Tome WY-250; beberapa aksesoris/saluran pemandu dapat menjadi bagian dari perlengkapan mesin bubut
• Satu set lengkap jaw tangan ("Manine") untuk parts catcher (parts catcher sendiri tidak dicantumkan)
Kondisi mesin / Status teknis – PENTING
Mesin dijual dalam kondisi teknis saat ini dan penjual TIDAK akan melakukan perbaikan sebelum penjualan. Poin masalah / kondisi penting yang diketahui:
• Turret bawah dengan alat bertenaga tidak berfungsi dengan baik
• Masalah dengan sistem pelumasan udara/minyak terdeteksi
• Karat ditemukan di dalam gearbox turret bawah
• Gearbox turret atas diisi dengan gemuk NBU15, meskipun sistem seharusnya bekerja dengan pelumasan udara/minyak
• Panduan linier/slideway sumbu Z1 perlu diganti
• Panduan linier/slideway sumbu Z2 perlu diganti
• Penyimpangan geometris ditemukan selama pemeriksaan mesin
• Deviasi run-out terukur pada spindle/rem/silinder hidrolik
• Beberapa bearing, ball screw, seal, roller pemandu, sabuk, komponen pelumasan, dan scrapper harus diganti sesuai daftar suku cadang terlampir
Sorotan inspeksi:
• Geometri mesin dan paralelitas spindle telah diukur dan didokumentasikan
• Nilai run-out spindle dan sistem penjepit hidrolik telah ditentukan
• Komponen pelumasan dan proteksi pada beberapa sumbu perlu perawatan/penggantian
• Daftar suku cadang rinci tersedia
Dokumentasi yang disertakan:
• Laporan inspeksi teknis
• Laporan pengujian geometri
• Daftar/daftar penggantian suku cadang

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2017

1.384 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 631 7... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Pusat pembubutan dan milling CNC Nakamura-Tome Super Mill WY-250

Zuchwil

11.313 km

Pusat pembubutan dan milling CNC
Nakamura-TomeSuper Mill WY-250

Hubungi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Bodpfsy Ipp Rox Ad Rsdf Standard turning diameter: 150 mm Distance between centers: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis Travel: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2-axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2-axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and Sub Spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: infinitely variable / infinitely variable Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing inner diameter: 110 mm / 90 mm Draw tube bore: 66 mm / 52 mm C Axes: Smallest input increment: 0.001° Smallest command increment: 0.001° Max. indexing speed: 600 rpm Feed rate: 1–4800 mm/min C-axis clamping: disc brake C-axis positioning time: 1.5 s Upper/Lower Turret: Turret type: 12-position drum turret Number of tool stations: 48 (2 x 24) Tool size square: 25 mm Tool size round shank: 32 mm Driven tools: Drive system: individual drive Spindle speed: 6000 rpm / 3600 rpm Speed range: infinitely variable Number of tool stations: 12 × 2 Collet size: ER32 Tool holder capacity straight: 2 mm – 20 mm Tool holder capacity cross: 2 mm – 20 mm Drive Power and Torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Floor space required: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of supply as per photo documentation includes, among others: Nakamura lathe, tool holders (driven and static), collets, complete machine documentation, gantry loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is provided for the correctness, completeness, or timeliness of the information provided.

Lihat detail

Iklan kecil

Derek kanopi Derek Derek Derek dalam ruangan Landasan pacu derek Demag - Portalkran KBK 125KG Kettenzug KBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

Gondelsheim

11.191 km

Derek kanopi Derek Derek Derek dalam ruangan Landasan pacu derek
Demag - Portalkran KBK 125KG KettenzugKBK 1 KBK1 12x3,5m NL 125Kg + Zubehör

€2.150

VB ditambah PPN

Hubungi

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBHF-KBK1, DEMAG KBK crane system, crane runway approx. 12m x 3.5m Other dimensions available on request! Load capacity / lifting capacity: 125 kg (0.125 t) Technical details of the system: - Crane runway made from Demag KBK1 sections - System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, power supply, brackets/hangers, etc. - Includes 1 bridge with Demag DC-COM chain hoist (125 kg capacity) The crane is disassembled and available immediately. Very good used condition, see pictures. Item location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Bdedpfepiarnjx Ad Ref Other KBK systems available. Load capacities from 125 kg up to 1600 kg. Please inquire about your crane runway requirements, including jib load and dimensions.

Lihat detail

Iklan kecil

Jerman

11.248 km

TRAUB TNL 32
TRAUBTNL 32

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret Bdedpsx D Drcjfx Ad Rof • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Lihat detail

Iklan kecil

Lindlar

11.238 km

Mesin Poles
PM 1000

Hubungi

Iklan kecil

Mesin penggiling silinder cnc STUDER S242

Contamine-sur-Arve

11.428 km

Mesin penggiling silinder cnc
STUDERS242

Hubungi

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Distance between centers: 400 [mm] - Usable diameter: 180 [mm] LINEAR AXES - Travel X1 and X2 x Z: 220 [mm] - Travel Z: 850 [mm] - Resolution X x Z: 0.0001 [mm] TURRET: - Number of fixed positions: 12 - Tool holder: VDI30 GRINDING WHEEL HOLDER HEADSTOCK - External grinding, right: * Grinding wheel dimensions (Ø x width x bore): 400 x 50 x 127 [mm] * Drive power: 6.8 [kW] WORKPIECE SPINDLE HEADSTOCK - Max. spindle speed: 7500 [rpm] - Spindle speed (synchronous speed): 1 - 5000 [rpm] - Taper type: MT4 - Drive power: 10.5 [kW] - C-axis: 0.001 [°] SYNCHRONIZED SUB-SPINDLE - Max. spindle speed: 7500 [rpm] - Spindle speed (synchronous speed): 1 - 5000 [rpm] - C-axis: 0.001 [°] - Internal taper: MT4 - Micrometric adjustment: +/- 40 [microns] - Drive power: 10.5 [kW] POWER SUPPLY - Power requirement: 45 [KVA] DIMENSIONS - Space requirement: 2800 x 3960 [mm] - Machine weight: 7600 [kg] MACHINE HOURS - Power-on hours: 57000 [h] ACCESSORIES - CN FANUC 310i-modelA - StuderWIN software - RS232 / USB interface - Remote electronic handwheel - Turret head with automatic length calibration Renishaw LP2 - Marposs diameter probe (multirange) + Z4-axis for positioning - Semi-automatic grinding wheel balancing unit MPM.3 BMT100 M.24 Bdjdpfovxw A Usx Ad Ref - Coolant tank 480 L * with paper filter * with magnetic filter - Chip conveyor - Mist extraction unit - Cooling unit for grinding wheel motor cooling - Dittel AE6000 electronic touch detection - Stationary dressing device on workpiece spindle headstock - Electrical cabinet air conditioning - Balancing arbor - Interface for automatic loading system

Lihat detail

Iklan kecil

Pusat pembubutan dan penggilingan cnc Mori Seiki ZL200SMC

Aprilia

11.014 km

Pusat pembubutan dan penggilingan cnc
Mori SeikiZL200SMC

€18.000

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, PUSAT BUBUT "MORI SEIKI" MOD. ZL 200SMC Dengan turret ganda bermotor & sub-spindle CNC MSC-501 Panjang pembubutan mm 452 Diameter maksimum pembubutan mm 388 Diameter maksimum di atas alas mm 510 Jarak antar senter mm 751 Mount spindle A2-6 Kecepatan spindle 4.000 rpm Daya motor spindle 11 kW Jumlah alat 12 Bdjdpfxsxwxwte Ad Rsf

Lihat detail

Iklan kecil

Mesin Poles Weiz Industrie- und Robotertechnik RPM500_OSZ2

Lindlar

11.238 km

Mesin Poles
Weiz Industrie- und RobotertechnikRPM500_OSZ2

Hubungi

Iklan kecil

Pusat penggilingan balik CNC Gildemeister GMX 400 linear

Sternenfels

11.178 km

Pusat penggilingan balik CNC
GildemeisterGMX 400 linear

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2003, panjang pembubutan: 1.505 mm, Turning and Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control system: Sinumerik Power line Technical Specifications: Main spindle ISM 90 drive power: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Bedpfxewzbq Ts Ad Rjdf Magazine capacity: 120 slots Milling spindle tool holder: HSK 63 Counter spindle ISM 90 drive power: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed for driven tools: Number of turret stations: 12 Tool holder: VDI 40 Equipment: - Chip conveyor - High-pressure system with 20 bar - Preparation for 3D touch probe - Tailstock function for counter spindle - Automatic sliding doors

Lihat detail

Iklan kecil

Pusat pembubutan dan penggilingan CNC MORI SEIKI ZT 1500 YB

Schweiz

11.271 km

Pusat pembubutan dan penggilingan CNC
MORI SEIKIZT 1500 YB

Hubungi

Iklan kecil

Swiss

11.248 km

SAACKE UWIF
SAACKEUWIF

Hubungi

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), berat keseluruhan: 3.800 kg, kecepatan spindel (maks.): 600 rpm, jumlah sumbu: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle rated at 16 kW peak power. The machine accommodates a wide range of workpiece sizes, with a maximum diameter of Ø 20 mm and a load capacity of 1 kg. If you are looking for high-quality grinding capabilities, you should consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Please contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; positioning accuracy ±15''; index range 1–999; cumulative lead error over 100 mm: 8 µm; max. speed 600 rpm • Tool holder: ISO 50 • Spindle chuck sleeve clearance: max. 28 mm (with automatic clamping: Ø 20 mm) • Rated drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide vertical: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Positioning systems: • A-axis: direct measuring system • B-, X-, Y-, Z-axis: indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; circuit breaker: separate supply from the mains • Compressed air: 15–17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; software NUMROTOplus (dongle/hardlock required); zero points calibrated (calibration instructions supplied – no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up system • Max. workpiece: Ø 20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø 3.0–5.0 mm shank: 40 pieces • Ø 5.1–8.0 mm: 32 pieces Bedpfxoyiz R Ue Ad Redf • Ø 8.1–11.0 mm: 28 pieces • Ø 11.1–14.0 mm: 24 pieces • Ø 14.1–20.0 mm: 20 pieces • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø 32 mm × 200 mm; 2.5 kg • Features: Random loading of different workpieces; automatic quick-change collets supported • Chuck sleeves: Ø 6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and footprint to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): to be provided by customer; air for back-flushing approx. 700 Nl/min for 5 min every 6–9 hours

Lihat detail

Beriklan di sini