Filter Press

Netzsch Passavant KFP 1500/75

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Vacuum tempering furnace Manufacturer: BMI Year of manufacture: 2001 Maximum temperature: 750°C Batch size (L x W x H): 1200 x 600 x 600 mm Heating: Electric Kedpfovcyf Tox Aahsnf Heating capacity: 100 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Trafo distribusi kering kering, 3 unit, 2000kVA, produsen SGB Jerman, rasio tegangan 22000 (± 2 x 2,5 %) /400V, Dyn1, IP31 atau IP00, Al/Al, unit evaluasi suhu, berfungsi, kondisi fungsional. Knedpfx Aolpd Tcsahef

Kondisi: bekas, System: Inclined Clarifier, Lamella Clarifier, Lamella Separator Condition: Used, up to 120 m³/h depending on medium Design: Robust, high-performance construction Kodpfx Asppyhtsahenf Material: Stainless steel on container frame, 30' container, scraper plates in PP (polypropylene) Dimensions (LxWxH): 7580 x 2435 x 3000 mm Weight: approx. 8,000 kg Principle: Wastewater is fed into the inlet of the inclined clarifier and flows downward. Due to the arrangement of the lamella plates in the clarifier, the wastewater is redirected underneath the plates and flows upward through the lamellas. As a result, solids settle down onto the lamella plates. The clarified water is transported to the outlet. Solids on the lamella plates gradually slide down along the plates, where the sludge hopper is located. Rake Mechanism: Optionally, we offer the inclined clarifier with a rake mechanism to keep the sludge fluid. Application: Separation of solids and liquids by sedimentation. Inclined clarifiers are often used as a pre-stage before filter presses or decanters for thickening. Pre-thickening of thin sludge allows the filter press to be sized smaller in terms of filter area. The system is in good condition and available for rent or sale. Inspection at our plant is possible by appointment. We also offer new inclined clarifiers with a delivery time of approximately 8 to 10 weeks!

Kondisi: baik (bekas), Tahun pembuatan: 1977, Pressing force 250 t Upright distance 1,120 mm Stroke 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm Table surface 1,100 x 900 mm Table height above floor 950 mm Kodpfx Aasx Ug Dshsnf Lateral upright clearance 700 mm Ram surface 1,100 x 900 mm Speed down mm/s Speed up mm/s Working speed mm/s Oil capacity 730 l Drive power 56 kW Weight 25 t Space requirements (WxDxH) 2.3 x 1.55 x 3.96 m Additional Information with electro-hydraulic drive, hydraulic (20) and electrical control system according to UVV, light curtain (Sick), upper and lower stroke limit, pressure- and travel-dependent controllable, cut shock absorber, short-stroke control, new control (Mitsubishi), safety control (PNOZ Multi), screen control with touch screen, control cabinet

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2012, nomor mesin/kendaraan: 925624, Kuka Unused stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Knsdpjrfch Usfx Aahof Weight: 1,412 kg Serial number: 925625 Includes connecting cables: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot Data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot motion speed in °/s Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Axis 5: 129°/s Axis 6: 206°/s

Tahun pembuatan: 1986, Kondisi: diremajakan ulang (bekas), Chamber filter press, fully refurbished with stainless steel lining, 82 polypropylene (food-grade) filter plates, 30 mm cake thickness, press volume approx. 1,100 liters, filtration area 96 m², fitted with new filter cloths, max. feed pressure up to 15 bar, closed outlet via 2 diagonal corner ports, automatic plate shifting and filter cloth washing system in stainless steel, high-pressure pump 100 bar, Manzini piston pump (MC-100 in stainless steel) for filling, with raised support frame (stainless steel), control cabinet Ksdpon Dw Nksfx Aahenf

Kondisi: bekas, Tahun pembuatan: 2018, Plant: Decanter Type: Flottweg C4E-4/454 Complete Dewatering System in Container Year of Manufacture: 2018 Sludge Throughput: approx. 0–40 m³/h Solids Capacity: max. 1.2 t DS/h Features: Front double door, side access door, fan heater, lighting, power sockets, etc. Bowl: max. speed 3650 rpm Drum Diameter: 470 mm System: Containerized plant with swap body system for mounting subsequent system components. Fully piped and wired, operational as a functional unit. Container Design: Frame construction, clad with sandwich panels, mounting points for swap body transport systems. Accessories: FHM PolyMix 4000SP polymer preparation unit, measuring equipment, control panel. Feed Pump: Seepex BN 52-6LS Discharge Conveyor: Dual-trough screw conveyor SS D320 Dimensions: L 7820 mm x W 2500 mm x H 3880 mm Unladen Weight: 14,500 kg Operating Weight: 15,000 kg Voltage: 400 V Current Draw: 142 A Max. Power Consumption: 70 kW Fusing: 250 A Frequency: 50 Hz Knedpfju R Icmex Aahof Sludge Inlet: DN 100 Centrate Outlet: DN 200 Solids Discharge: Screw conveyor Further Information: see photos

Kondisi: baru, The Turnado 230/2000 is a state-of-the-art conventional lathe, part of the universal lathe product line. With this machine, KNUTH has created a precise and high-performance tool distinguished by its robust construction and long service life. Equipped with a powerful motor and a wide range of useful accessories, this machine meets various production requirements. Its solid construction and heavy, one-piece cast bed ensure high stability during machining, while the intuitively operated panel on the headstock and the 3-axis position display provide ease of use and high accuracy. Additionally, the adjustable longitudinal stops allow for automated feed shut-off, significantly simplifying repetitive machining. The Turnado 230/2000 is perfectly suited for long workpieces, thanks to the standard accessories, which include both a travelling and a fixed steady rest. If you are ready to acquire this robust universal lathe, order now or request a quotation. Knjdep Ebgrspfx Aahof

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Dear Sir or Madam, We offer for sale a partially overhauled Deckel FP1 with 3-axis TNC113 active control, renowned for its straightforward operation. This later model, from year of manufacture 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone a thorough partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine yourself on site. Delivery time: on request Machine number: 2102-xxxx Table: fixed angular table or rotary-tilting table Travel distances: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Ksdpfx Aaspy Eldehenf Feed: infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital display with active control, infinitely variable feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, machine leveling feet, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced beforehand - Upon request, we can deliver your chosen machine either fully or partially overhauled - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further equipment such as safety devices directly - We are happy to take care of shipping and/or installation

Kondisi: baru, ex-demo-promotion--NEW No. 1 unit available for immediate delivery. CE certified warranty. The MACC SPECIAL 335 MS is a semi-automatic bandsaw suitable for cutting solid bars and small profiles, offering high performance and excellent precision. Its robust frame provides the necessary rigidity and accuracy to the cutting assembly. The blade is powered by a two-speed motor and a special gearbox with a hardened and ground bronze worm gear. The appropriately sized flywheels and robust blade guides are fitted with sealed bearings and adjustable carbide pads. Blade tensioning is managed via an electromechanical micro-switch, which is activated by rotating the blade. Safety features include an accident-prevention device on the flywheel covers and blade, complemented by a swiveling worktable for material support and a vice with rapid approach mechanism. Operation: The cutting cycle starts at the touch of a button: 1. the vice closes and the blade motor is activated; 2. the bow descends for cutting; 3. the bow returns to the start position; 4. the blade motor stops; 5. the vice opens. Manual cutting is also possible. Cutting speed (m/min): 38-77. Blade thickness (mm): 1.2. Cutting range: 45° left to 60° right. Adjustable stop for repetitive cuts. Band coolant electric pump: 0.06 kW. Cutting capacity at 0° (Round, Square, Rectangle): 260 / 250x250 / 220x330 mm. Cutting capacity at 45° left (Round, Square, Rectangle): 225 / 210x210 / 160x225 mm. Cutting capacity at 45° right (Round, Square, Rectangle): 215 / 200x200 / 160x210 mm. Cutting capacity at 60° right (Round, Square, Rectangle): 130 / 130x130 / 130x140 mm. Blade dimensions: 3010x27x0.9 mm. Weight [kg]: 415. Knsdsg S Ui Aspfx Aahof