Sistem aplikasi lem

Nordson 3500 Vista 2EBV6D/R

Kondisi: baru, Tahun pembuatan: 2025, Automatic powder filling and lid sealing machine for small containers such as coffee capsules. – Suitable for dosing and filling powdery products (coffee, coffee blends, drinking chocolate, milk powder, etc.) into a variety of capsule-shaped container sizes and formats (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, with or without filter, etc.), followed by sealing. Automated filling and dosing via auger filler. UV sterilization system, ionizer, and dust extraction system for cavity formats included. Automatic foil feed and double heat sealing of the lid. – Specifications: maximum idle speed: 55 cups/min; filling range: 0–20g; filling accuracy: +/- 0.15g; hopper capacity: 5L (approx. 3kg powder); voltage supply and power consumption: 220V, 1.5kW; required compressed air and flow rate: 6–8 bar, approx. 300L/min; protective gas flow rate: approx. 200L/min; machine dimensions: L1900 x W1118 x H2524mm; weight: 800kg. Specifications are based on Nespresso capsules; deviations may occur for capsules of other brands. Laedjv Nkzxepfx Abvog Please note that our new prices are often lower than typical used market prices. Feel free to send us an inquiry and let us know your packaging requirements. – We generally have 30–50 different new machines available from stock for immediate delivery. For customer-specific machine builds, we offer very short lead times starting at approx. 3 weeks. – All machines are supplied with a full warranty.

Kondisi: bekas, de-Nordson Problue 4 Schmelzklebstoffpumpe Modell Problue 4 Lsdpewq Sv Eefx Abvoag Komplett mit 2 beheizten Schläuchen und Auftragsköpfen, Luft-Magnetventil & Modulen Klebstoffauftragswanne / Aufbewahrungsbehälter Montiert auf einem Edelstahlgestell

Kondisi: baru, Tahun pembuatan: 2025, Fully automatic case erector for efficient and economical packaging processes. The cardboard blanks are automatically taken from the magazine, erected, and sealed from the bottom (one direction). Subsequently, the erected cartons are conveyed out via a conveyor belt and collected for filling. Specifications: SIEMENS PLC, SIEMENS touchscreen; carton size in mm: L(350-650)xW(150-500)xH(100-500); max. machine cycle rate (idle): 9 cycles/minute; power supply: 110/220V, 0.3kW; compressed air: 5-6bar, 0.4m³/min; tape width in mm: 48/60/75; machine dimensions: L2200xW1900xH1450mm; weight: 530kg. Ljdpfx Aov Nkviobveag Please note that our new equipment prices are often below typical prices for used machines. Feel free to enquire and tell us about your packaging requirements. – We generally have 30 to 50 different new machines available ex-stock at any time. For custom-built machines, we offer especially short lead times starting from approx. 3 weeks. – All machines are available with full warranty.

Kondisi: bekas, Nordson Problue 7 Heißleimpumpe Modell Problue 7 Ljdswq S Eyopfx Abvjag

Kondisi: baik (bekas), Tahun pembuatan: 2014, Food Machinery Co E4230 VFFS Schlauchbeutelmaschine Lsdpfowtqrwox Abvoag 2014, Edelstahl-Schlauchbeutelmaschine, Schweißbackenbreite 250 mm, einstellbare Siegeltemperaturen und variable Kühlzeit, derzeit mit einem 95 mm Durchmesser Formschulter-Set ausgestattet, inklusive Eidos Swing Thermotransferdrucker, 1-phasig

Kondisi: bekas, Rotary vane vacuum pump Oil-lubricated Manufacturer: Becker Model: U5.100 Pumping speed: 100 m³/h Ultimate pressure: 0.1 mbar (abs.) Included: Gas ballast, oil filter Lasdpfxjdnvype Abveg Condition: Demonstration unit Warranty: 12 months Delivery time: from stock

Kondisi: baru, Tahun pembuatan: 2025, Automatic rotary cup or container filler including film sealing module. – Suitable for various container sizes, shapes, and materials (e.g., PP, PS, PET, paper, laminated films, etc.). Ideal for ready meals, noodles, pasta, dried fruit, snacks, candy, chocolate, soup powder, frozen meals, yogurt, ice cream, jam, etc. Fully automatic operation from cup dispensing to filling and sealing. Compatible with all types of (separate) dosing systems for liquids, pastes, granulates, powders, etc. Easy operation via touchscreen monitor, stainless steel design, easy to clean. Print mark sensor. Wide range of sizes/shapes possible thanks to an adjustable cavity for the container. – Specifications: Number of production stations: 8; max. idle cycle speed: 20 cycles/minute; power supply: 220V, 1.5kW; compressed air: 0.1m³, 6 bar; machine dimensions: L950xW870xH1600mm. The machine/system is also available in further versions for various packaging sizes and speeds. Laodpfxev Nkybs Abveg Please note that our new prices are frequently below the usual prices for used equipment. Feel free to contact us and let us know your packaging requirements. – We typically have 30–50 different new machines available for immediate delivery from stock. For machines manufactured to customer specifications, we offer very short lead times of approx. 3 weeks. – All machines are available with a full warranty.

Kondisi: bekas, Tahun pembuatan: 2006, Fully automatic blending/carbonation system for continuous adjustment of original gravity, alcohol, and CO₂ content. Beer inlet capacity: 200 hl/h Deaerated water capacity: 100 hl/h Blended beer capacity: 300 hl/h CO₂ supply min.: 8 g/l ≥ 99.98% purity Power: 23 kW Current: 50 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar Length: 2,790 mm Laodpfovcqlqox Abvsg Width: 1,250 mm Height: 2,440 mm Operation / Control: fully automatic, control cabinet with operator panel Material: stainless steel Equipment: Flange connections – Beer: DN80, deaerated water: DN40, CO₂: DN25, blended beer: DN65; Beer pump; Carbonation section; Flow measurement; Anton Paar measurement for original gravity, alcohol, and CO₂; Manometer; Sampling valves; various additional valves Weight: 500 kg

Kondisi: bekas, Tahun pembuatan: 2007, Prominent water treatment plant, comprising: 1. Softening: The raw water is fed into the twin softener unit. Only one vessel is ever in service, while the other is regenerating or on standby. In the softener, calcium and magnesium are replaced by sodium. The system features volume monitoring, which switches to the other vessel once the preset throughput is reached. Regeneration is performed using brine from the salt tank. The outflow hardness is 0°dH. 2. Reverse osmosis: The reverse osmosis unit fills the permeate tank with demineralised water (permeate). Conductivity and operating pressure vary depending on raw water quality, temperature, membrane condition, and correct settings. At initial commissioning, the following flows are set: Permeate 600 l/h, concentrate 200 l/h, corresponding to a yield of 75%. 3. Permeate tank and ozonation: The 500 l atmospheric permeate tank is equipped with adjustable level control. For ozonation, water is circulated from the permeate tank via a variable ozone dosing point. Ozone is generated in the ozone generator by silent electrical discharge from ambient air and is supplied as an ozone-air mixture. Air and undissolved ozone rise in the permeate tank and are vented via the residual ozone destructor. After the centrifugal pump, redox potential and ozone are measured for process control. Ozone dosing is set via the touch panel. Control can be based either on redox potential or measured ozone concentration. Laodpfx Ajw Uvdgobveg Machine features: Water softener, reverse osmosis system, ozone disinfection Permeate output: 600 l/h Concentrate output: 200 l/h Ozone output: 5 g/h Max. operating pressure: 16 bar Current: 2 A Voltage: 230 V Frequency: 50 Hz Water: < 5 bar (cooling water) Compressed air: 5.5 – 6.5 bar (max. 10 bar); max. 0.37 Nm³/h Operation/control: Simatic S7-300, touch panel Mounting/position: freestanding Base construction: fully assembled on pipe frame with dome feet Equipment: Reverse osmosis module, reaction vessel fully equipped with residual ozone destructor, ozone generator, ozone gas detector, ozone and redox sensors, control cabinets with controller

Kondisi: baru, Tahun pembuatan: 2025, Complete version of the vertical packaging system with auger dosing unit, screw conveyor, and discharge conveyor belt. Suitable for packaging powdery products with either high or low flowability. The vertical form fill seal machine (VFFS) is equipped with the following components: PLC (touchscreen operating monitor, available in various languages, e.g., English, German, etc.), date printer, automatic program setup, mark sensor, quick-change forming unit, pneumatic sealing unit, servo motor for film transport, double transport possible, air separation/extraction device (removes air from the bag before sealing—no vacuum is generated), heavy bag holder, Euro hole punching unit, suitable for OPP and PE film (PE unit possibly at extra cost). - VFFS machine specifications: Filling range: up to 3000ml; film width: max. 520mm; bag size min-max: L(80-400)xW(80-250)mm; max. idle machine cycle rate: 50 cycles/minute; stainless steel 304; 220V, 4kW; 6 bar, 0.3m³/min; machine dimensions: LxWxH: approx. 1150x1790x1650mm; weight: 600kg. - Auger dosing unit specifications: Hopper capacity up to 50l; filling range: 10-1000g; max. idle machine cycle rate: 50 cycles/minute; accuracy: ±0.3~1.5% (depending on product); 380V, 2.5kW; dosing unit dimensions LxWxH: 690x1030x1100mm; weight: 150kg. Screw conveyor for automatic transport of material to the dosing unit. Vibratory motor ensures uniform product flow. Supply hopper with up to 150-liter volume. Size depends on the customer's specific final system. - Specifications: hopper, conveyor length, and angle can be customized for product and customer requirements. Overall dimensions depend on these factors. Conveyor length: 3~4m; stainless steel 304; conveying speed: 3.0m³/h - 12.0m³/h; 380V, 0.8kW-4.1kW; weight: 130kg – 270kg. Deviations from the stated specifications are possible. Support bar is optionally available. The discharge conveyor has a stainless-steel frame. - Specifications: conveying speed: 30m/min; 220V, 0.55kW; dimensions LxWxH: approx. 1850x550x1230mm; weight: 80kg. Dimensions of the complete system: approx. 2350xW3590xH2500mm, depending on final configuration. In general, the system must be adapted to customer or product-specific requirements. Therefore, deviations in specifications for the modules and machines are possible. The main components: Color touchscreen display SIEMENS, PLC control unit SIEMENS, servo motor SIEMENS, cylinder AIRTAC, solenoid valve AIRTAC, relay OMRON, servo motor for film transport SIEMENS. The machine/system is also available in further versions for different packaging sizes and packaging speeds. Lodpfx Abev Nmkvovjag Please note that our new prices are often lower than the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – Generally, 30-50 different new machines are always available from stock for immediate delivery. For machines manufactured to customer specification, we offer very short lead times starting from approx. 3 weeks. – All machines are supplied with a full warranty.