Nuova Progetti mesin pembuat lubang mortise otomatis (Pahat mortise otomatis)

Nuova Progetti

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Kfedpfed Rg Dpex Aahsa Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: bekas, Tahun pembuatan: 2012, Integrated NC machining center for windows and doors consisting of: A) Automatic Loader Model “SP” Automatic Loader for Base SP No. 1 Moulder - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from the buffer to the moulder loading area * Workpiece length min: 450 mm / max: 3200 mm * Workpiece width min: 40 mm / max: 230 mm * Workpiece thickness min: 40 mm / max: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st top horizontal spindle Position 5 = 1st bottom horizontal spindle Position 6 = Bead recovery unit 2500 mm infeed height Feed speed: 6-36 m/min via inverter No. 1 - Motor power: 5.5 HP (4 kW) Horizontal pressure unit before the planer, pneumatically disengaged from panel Pneumatic disengagement from the control panel for the feed unit before the planer spindle Tandem infeed unit before the right vertical spindle with quick release Feed groups after the upper spindles to reduce trailing length from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical preparation for use of automatic loader Manual central lubrication Pump for lubricating the work table with automatic drive Facility for online integration with INTEGRA SYSTEM - Working table raised to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors T-SET quick tool clamping system - Allows tool locking/unlocking simply using a pneumatic gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors High-precision spindle Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Kfedpfx Aasixxwmshea Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system POS. 6 Bead recovery unit Includes: PRL allows automatic transition from planning to bead recovery and vice versa. - Working group with 30 mm spindle diameter, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem output and modifications.

Kondisi: bekas, Tahun pembuatan: 2007, Slot spindle 3 units Number of milling units: 5 units Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC ----- High-performance and flexible CNC machining center for windows and doors Processing of workpieces up to a maximum length of 4,500 mm, 250 mm width and 150 mm thickness Consisting of Windor 60 Version B Infeed conveyor Slot machining section: ----- Pos. 1: Crosscut saw ----- - Motor: 4 kW - 3,000 rpm - Spindle diameter: 40 mm - Maximum tool diameter: 400 mm, bore: 80 mm Pos. 2: 1st slot spindle ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3,500 rpm - Maximum tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning - Interpolating rotation, automatic tilt window feature +/- 60 degrees Pos. 3: Electro spindle with HSK 63 F tool holder ----- - Min/max. speed: 1,000-12,000 rpm - Maximum motor power: 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slot spindle ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3,500 rpm - Maximum tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning - Interpolating rotation, automatic tilt window feature +/- 60 degrees Pos. 5: 3rd slot spindle ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3,500 rpm - Maximum tool diameter: 370 mm - Counter unit "Jolly" - Infinitely variable vertical positioning Fleximat ----- Including left and right stops with horizontal CNC adjustment for the following through-feed operations: Lock case milling and 9-degree Anuba hinge drilling from the right. Dowel drilling and strike plate marking from the left and right, each with 7 spindles. Cup hinge drilling and olive handle drilling from above. Profile machining section ----- Pos. 5: Power 2000 F4: Electro spindle with HSK 63 F tool holder ----- - Operates from the left - Min/max. speed: 1,000-18,000 rpm - Maximum motor power: 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profile spindle from the right ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6,000 rpm - Tool diameter min./max.: 130–250 mm - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 2nd profile spindle from the right ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6,000 rpm - Tool diameter min./max.: 130–250 mm Kfsdpfx Aasw Im Iiehea - Infinitely variable vertical positioning - Infinitely variable horizontal positioning Pos. 7: 3rd profile spindle from the right ----- - High-performance spindle with upper bearing, spindle length: 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6,000 rpm - Tool diameter min./max.: 130–250 mm ...

Kondisi: bekas, Bar machining center, 3 axes Kjdpfowh A Hisx Aahefa

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 3.200 mm, diameter spindel: 60 mm, kecepatan spindel (maks.): 6.000 rpm, daya unit penggilingan: 7.500 W, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 600 mm, lebar yang dibutuhkan: 8.000 mm, persyaratan ruang panjang: 7.000 mm, berat keseluruhan: 15.500 kg, panjang spindle milling: 600 mm, diameter mata gergaji: 400 mm, daya: 70 kW (95,17 hp), tegangan masuk: 380 V, jenis penyesuaian ketinggian: listrik, daya motor pengumpan: 7.700 W, tinggi kerja: 120 mm, lebar kerja: 160 mm, Hochleistungs-Fensterfertigungsmaschine mit 2 Anzapfstationen sowie zwei rechten und einer linken Profilspindel; fertigt Direktfenster in Stärken von 68, 88 und 130 mm. Lieferung nach Vereinbarung. Kjdjtp Dngopfx Aahjfa

Kondisi: siap digunakan (bekas), Technische Merkmale Zapfenlänge: 20 bis 110 mm Kfjdpfx Ajt Dgacsahja Zapfendicke: 2 bis 29 mm Maximale Zapfentiefe: 110 mm Gestell aus Gusseisen, Tisch aus Aluminium Manuelle Werkstückspannung (2 vertikale Niederhalter und 1 Frontniederhalter) Motor: 1,1 kW (1,5 PS), 3000 U/min Holzabmessungen: Breite: 30 bis 150 mm Dicke: 15 bis 80 mm Automatischer Teilevorschub aus Magazin Automatischer Vorschub des Zapfenkopfes Leistung und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 1,5 kW Motor: 1,5 PS Gesamtabmessungen Länge: 4100 mm Breite: 1350 mm Höhe: 1500 mm Gewicht: 600 kg