Sistem miring

Okoma UF 3 S

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. Ffedpfx Aod Hz Nisdget BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Kondisi: bekas, Slot spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely inspected prior to delivery ----- Technical Data Summary (additional accessories possibly included upon request) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g., for edge rounding from above > Laser alignment light for recognizing the saw section Pos. 2: Rounding Unit Horizontal Bottom ----- > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm Ffedovu Hghopfx Adgst > Spindle speed: 9000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically coupled to crosscut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3500 mm > Electronic length stop Pos. 3: Tenoning and Slotting Spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 3,500 rpm > Max. tool diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st Profiling Spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide fence on the stop (area of climb-cut spindle), Sash bar support rail from above in the area of vertical right profiling unit and profiling spindle. Pos. 6: Profiling/Milling Unit, Horizontal Top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/Grooving Unit from Below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Tahun pembuatan: 1999, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: AL 1 / 99, Connection 9.0 kW 400 V Compressed air connection 6 bar Extraction 1x160 mm 3400 m³/h 30 m/sec Compressed air consumption 200 NL/min Drilling spindles 9 pcs / 3000 rpm Grooving cutter 1 pc / 6000 rpm Milling spindle 1 pc / 16000 rpm Ffjdpjiiy E Tefx Adget LxWxH 4050 x 2050 x 1900 mm Weight approx. 1500 kg Max. panel thickness 55 mm

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 1.230 kg, AUTOMATIC SAW / DOUBLE-HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Fodpfx Ader E Alqegeft

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, norwegian-01 Fjdpfx Aomgc I Nodgjft

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Μηχανή περιθωριοκόλλησης Hebrock F5 με σύστημα ελέγχου PLC, χωρίς ανάγκη συντήρησης και με επικάλυψη στον ταχέως θερμαινόμενο δοχείο κόλλας, με προδιαμόρφωση για ταχεία αλλαγή δοχείου. - Οθόνη αφής 10” - Μέγιστο πάχος ταινίας 3mm - Ελάχιστο μήκος τεμαχίου 160mm - Ταχύτητα προώθησης 7m/min - Έτοιμη για λειτουργία σε περίπου 3,5 λεπτά - Μέγιστη κατανάλωση ισχύος 7,4kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Ύψος τραπεζιού 900mm - Διαστάσεις μηχανήματος 4300x1300x1400 mm - Βάρος περίπου 900Kg Επιπλέον δυνατότητες Ffedpfx Adewyu Rwogjt • Κεφαλή προφρεζαρίσματος Whispercut, ύψος τεμαχίου 50mm • Κεφαλή combi cutter • Ακτίνα για στρογγυλοποίηση γωνιών R = 2mm • Στρογγυλοποίηση γωνιών με ακτίνα R = 2mm • Σύστημα ταχείας αλλαγής κινητήρα για στρογγυλοποίηση γωνιών • Ξύστρα πολλαπλής ακτίνας R2/R1 • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικός ψεκασμός στην ακμή • Εξοπλισμός nesting για τη μονάδα φρεζαρίσματος και τον ξύστη προφίλ ακτίνας • Πνευματική ρύθμιση τριών σημείων • Πολυεργαλείο (R2/R1/φαλτσοκόπηση) • Εσωτερικός LED φωτισμός

Kondisi: bekas, Weinig Unicontrol 10 (UC 10) angle processing line for the production of windows, components, and doors. Suitable for frame-based, series, or single-part production, featuring 2 tenoning and mortising spindles, including Oertli tool set. - Units/equipment: 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and mortising spindle, NC axis, ø 50 mm, 15 kW, Clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and mortising spindle, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 5. Profile milling unit, horizontal, from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, Clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, Clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Twin part package - Rebating package with rebate carriage - Automatic turning system - NEXUS PC control - CNC-controlled length stop - Studio window configuration - Unit for bottom edge rounding with crosscut saw - Glazing bar support rail Ffsdpfxsv Ag Tds Adgst - Including extraction duct system - Including Oertli tool set - Further technical data and tooling diagrams available on request.

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Fjdst R T Hcjpfx Adgeft

Tahun pembuatan: 2020, Kondisi: diremajakan ulang (bekas), dear-customers-our-experience-has-shown-that-communication-by-e- mail-usually-unnecessarily-drags-things-out-we-want-to-help-you-q uickly-and-its-better-to-talk-for-three-minutes-on-the-phone-than -to-send-e-mails-back-and-forth-for-three-days-tswc-30-20-dry-spr ay-booth-dimensions-3000-x-2000-mm-w-x-h-fan-mounted-at-the-top-a irflow-10-800-m3-h-motor-2-20-kw-explosion-proof-exhaust-duct-500 -mm-diameter-depth-900-mm-double-filtration-paper-filter-paintsto p-filter-mat-with-clamping-rail-180-eur-net-extra-options-additio nal-costs-paintstop-filter-mat-with-clamping-rail-180-eur-net-sid e-baffles-with-hinges-590-eur-net-photos-may-vary-we-also-offer-c omplete-spray-rooms-with-supply-air-system-heat-exchanger-supply- air-ceiling-piping-etc-just-contact-us Fsdjfn Nddopfx Adgeft

Kondisi: bekas, Technical details: Welding current: 500 A Length: 1200 mm Height: 1260 mm Connected load: 26.6 kVA Power input: 100 kW Open-circuit voltage: 65 V Machine weight approx.: 147 kg Machine dimensions: 1.2 x 0.45 x 1.2 m Ffjdpfx Aewrq Txodgst Welding cable with welding torch *