Mesin Bubut CNC 4 Sumbu

Okuma LU300-2ST 350

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Control: OSP-P20L-R Swing diameter over bed: 450 mm Swing diameter over longitudinal slide: 350 mm Swing diameter over cross slide: 300 mm Spindle bore: 43 mm Spindle speed range: 75 - 3,000 rpm X-axis feed: 0.00001 - 39.37 mm/rev X-axis rapid traverse: 20 m/min Lhedpfovk Sqkox Aa Ujp Z-axis feed: 0.00004 - 38.37 mm/rev Z-axis rapid traverse: 25 m/min Tool turret: 12-position Driven tools Tool holder: VDI30 Machine weight: approx. 3,800 kg Bar feeder: BREUNING IRCO

Kondisi: bekas, Tahun pembuatan: 1998, 01715871 Lsdpfovnwf Isx Aa Uehp

Kondisi: bekas, Tahun pembuatan: 2017, Doosan Puma GT3100M tahun 2017 Tahun produksi: 2017 Kontrol: Fanuc 0i-TF Diameter pembubutan: [mm] 376 Panjang pembubutan [mm] 1245 Spindle utama: Spindle dengan penggerak sabuk Kecepatan putar (maks.) 2800 rpm Daya (maks.) 22 kW Torsi (maks.) Lhedpfoxggktex Aa Ujp 1124 Nm Kapasitas batang 102 mm Chuck 3-rahang, Schunk ROTA THW plus 315-104 Menara alat dengan 12 posisi Kepala revolver BMT65 Pergerakan sumbu X/Z 260/1350 mm

Kondisi: baik (bekas), Tahun pembuatan: 2007, panjang pembubutan: 1.065 mm, diameter pembubutan: 470 mm, Chip conveyor SMW 315 3-jaw chuck 2 x radial live tool holders 2 x axial live tool holders Spindle bore: 80 mm Ljdpfx Aajwq Rpwo Ushp BMT tooling system Tool setting probe Spindle hours: 6960 / 6270 operating hours Max. turning diameter: 470 mm X-axis travel: 260 mm Z-axis travel: 1065 mm Spindle bore: 80 mm Spindle speed: 4200 rpm Spindle power: 30 kW Tool changer: 12-position BMT tool system Driven tool speed: 6000 rpm Driven tool power: 7.1 kW Length: 3310 mm Width: 1900 mm Height: 1970 mm Weight: 6100 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 15.600 h, Fungsionalitas: berfungsi sepenuhnya, Spindelhastighet: 50–6000 varv/min Lodpfxewfr R Ee Aa Ujhp Rörelse XA–XB: 205 mm ZA–ZB: 700 mm W: 730 mm YA–YB: 95 mm Revolver: 2× 16-positioners Multitasking V16 Spindelhastighet drivna verktyg: 45–6000 varv/min Motorer drivna verktyg: 5,5/3,7 kW Spindelmotorer: 22/15 kW Tillverkningsår: 2010-12 Längd: 3300 mm Bredd: 2500 mm Höjd: 2500 mm Vikt: 9000 kg Robotgränssnitt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, CNC Heidenhain iTNC 530 Handle elektronik Lhsdpfxsxbyrmj Aa Ujp Kepala milling 13.000 jam spindle Kecepatan 20 – 14.000 rpm Daya motor 18,9 kW Holder alat SK40 Kecepatan feeding kontinu hingga 20.000 mm/menit Meja penjepit 2100 x 700 mm Beban maksimum pada meja 1.500 kg Sumbu X 1.800 mm Sumbu Y 700 mm Sumbu Z 700 mm Jumlah posisi majalah alat 30 Alat maksimum di majalah: panjang 300 mm, Ø130 mm Pendinginan melalui spindle Konveyor chip 5890 x 1030 x t1550 mm, berat 770 kg Set alat 25 pcs Pengukur alat BLUM Dokumentasi lengkap Dimensi transportasi: 3423 x 7060 x t2622 mm Berat 12.380 kg Video tersedia.

Kondisi: baik (bekas), Tahun pembuatan: 2004, Spindle bore 60 mm Turning length 280 mm Control system Siemens 840 D Main spindle speed 6,300 rpm Drive power – main spindle motor 3.3 kW Turret 1 Disc turret Number of tools in turret 1: 8 Tool system DIN 69880 / 25 mm X-axis travel 90 mm Z-axis travel 280 mm Feed force 5,500 N Rapid traverse 24 m/min Drive power – milling spindle 5 kW Turret 2 Dovetail turret Number of tools in turret 2: 6 X-axis travel 81 mm Z-axis travel 80 mm Feed force 5,500 N Rapid traverse X-axis 16 m/min Rapid traverse Z-axis 24 m/min Machine weight approx. 2.5 t Space requirement approx. 6.0 x 2.0 x 2.0 m The INDEX ABC machine is a compact CNC lathe designed for machining short parts from bar stock. It features a slant-bed design with two independently operating turrets. The upper turret is primarily intended for internal operations and cutoff-side machining, while the lower turret handles external machining. The turret arrangement enables collision-free operation and straightforward programming with high tool availability. The spacious machining area provides optimal chip evacuation. The working area consists of two turrets: "Turret 1": - Disc turret with 7 radially arranged tool stations Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter holder, tools with 1” shanks can also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for back machining, enabling simultaneous parallel machining with the main spindle. Collet chuck Ø 42 mm or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Rear drilling device. Starting from the main spindle center, in a clockwise direction, 3 stationary rear-drilling tools are arranged on the pitch circle of the synchronized spindle. Back working is performed simultaneously with main spindle operations. In addition, two further tools can be mounted, which can be equipped with a tool drive. "Turret 2": - Turret with 6 symmetrical dovetail mountings, each station with 2 boreholes for cylindrical shank tools. The following tool systems can be used: - Fixed tools that are axially adjustable in the Z direction - Driven tools with 25 mm cylindrical shanks (can be fitted in two positions per station) - Including LM 3200 bar loader + Various accessories (various diameter guide channels/toolholders) Technical data: - Bar stock diameters: (Ø 25 / Ø 36 / Ø 52)– --> Round Ø 8 – 25.4 / 8 – 36 / 8 – 52 mm --> Square SW Ø 6 – 14 / 6 – 20 / 6 – 20 mm --> Hex SW Ø 7 – 22 / 7 – 30 / 7 – 41 mm --> Octagon SW Ø 7 – 22 / 7 – 32 / 7 – 40 mm --> Max. bar length: 3,200 mm --> For bars Ø 25 mm and above, min. 2,500 mm --> For bars up to Ø 25 mm, min. 1,500 mm Lhedpfjwbvhajx Aa Usp --> Bar rack = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, machine type: CNC lathe manufacturer: Okuma type: LU15-M year of manufacture: 2000 control: OSP-U100L country of origin: Japan delivery time: ex stock Long turning length – 1000 mm Auto-travelling tailstock – G152 Partial hollow chuck The lathe is in very good condition. Its standard and additional equipment make it possible to machine long workpieces up to 1000 mm even with this used machine. Efficient production is ensured thanks to the auto-travelling tailstock (G152), tool breakage/wear monitoring, partial hollow chuck, coolant pump, and conversational programming (IGF). This is an optimal machine for economical and reliable production. User-friendly and ready for immediate integration into production. Machine features - Spindle motor VAC built 22/15 kW - Long turning length – 1000 mm - Auto-travelling tailstock – G152 - 3-jaw chuck Forkardt, diameter 250 mm - Steady rest preparation B-turret - Partial hollow chuck Lsdpfx Ajv Id Ezja Ushp - Conversational IGF programming - Coolant pump - Tool breakage/wear monitoring - Chip conveyor Technical specifications - Max. turning diameter: 340 mm - Max. turning length: 1000 mm - X-axis travel: upper 260 mm (170+90); lower 140 mm (90+50) - Z-axis travel: upper 1,040 mm; lower 1,015 mm - C-axis travel: 360° - Spindle – number of speed ranges: 2 – automatic - Bore diameter: 62 mm - A-turret (upper): 12 tools, all M-tool capable, VDI 40 - B-turret (lower): 8 tools, VDI 40 - Rotary tool speed: 45~4500 rpm - Rapid traverse feed: X:15, Z:20, C:200 m/min - Tailstock quill diameter: 90 mm - Tailstock quill stroke: approx. 100-120 mm - Machine dimensions without attachments LxW: approx. 4800 x 2200 mm - Machine height: approx. 2030 mm - Weight: approx. 6900 kg Options - Transport organization and execution - Machine installation and setup - Machine commissioning and handover ready for production

Kondisi: bekas, Tahun pembuatan: 1990, Länge 600 mm Breite 400 mm Höhe 100 mm Maschinengewicht ca. 200 kg . +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. Lodpfxsfgv Ddo Aa Ujhp +++++

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, daya nominal (semu): 30 kVA, torsi: 163 Nm, beban meja: 400 kg, diameter meja putar: 400 mm, kecepatan rotasi (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 48, panjang alat: 300 mm, diameter alat: 70 mm, berat alat: 10 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Technical features: - CNC OSP P 200 - Chip conveyor - 48 tools Lhsdpfx Ajuw Sq Uja Usp - Full-continuous rotary table with 360,000 positions - 15,000 RPM, BT 40 spindle - Through-spindle coolant system, 20 Bar - On-table tool presetting - Work area shower-type washing system Note: The machine has always operated with full oil, machining Teflon material.