Omal Insert Level 3

Omal Insert Livello 3

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Dcodpfx Akegwbbqeaon Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: baru, Tahun pembuatan: 2026, Otomatis CNC bor dan penanam pasak untuk pengeboran, lem, dan penanaman pasak sepenuhnya otomatis. Pusat pemrosesan bor dan pasak dengan keunggulan compact, efisien, berkualitas dan fleksibel. Perkenalan singkat: • Mesin bor dan penanam pasak CNC universal yang dikendalikan komputer • Pengawasan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan panel dan kayu solid • Spindel bor horizontal dan vertikal tambahan opsional • Mengurangi beban pada pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting Dcodpfxsdx Axfo Akaon

Kondisi: sangat baik (bekas), Panel dividing saw angular system Control: OSI Plus with Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st Push feed saw with 5 grippers 90° turning device for panels 1st panel dividing saw, max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Djdpfx Akoukhd Aeajcn Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 Shear for waste material reduction 2nd Push feed saw with 10 grippers 2nd panel dividing saw, max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. blade diameter): approx. 215 mm Main saw (max. blade diameter / power): 530 mm (30 kW) Variable saw carriage feed (m/min): 1 - 170 No. 2 front air-cushion tables (mm: 2200 x 1500) Automatic outfeed bridge for cut panels “RBO (BIESSE)” model Lifter with 6 stacking positions

Tahun pembuatan: 2010, Kondisi: baik (bekas), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS CNC MACHINING CENTER (X-Y-Z) - Full protection of the operating head and working area on the machine - Numerical control (controller) with BIESSE Works software running on Windows - Vertical positioning of panels, with 2 panel locking clamps Dsdpshknbrefx Akascn - Panel feed (in X-axis direction, on lower support with rubber-coated wheels), movement (on X-axis) of the panel holding/fixing clamps WORKPIECE DIMENSIONS (WORKING DIMENSIONS): - Length: Min 160 mm / Max 3200 mm - Width: Min 35 mm / Max 900 mm - Thickness: Min 8 mm / Max 80 mm WORKING UNITS: - 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18,000 RPM) - 1 circular saw blade (for grooving) 120 mm diameter (fixed, X-axis) - 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - 1 boring unit for hinge drilling - Total installed power 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Tahun pembuatan: 2001, Kondisi: bekas, • Size of heating plate (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 Dedekt N Hujpfx Akaecn • Loading side (mm): 1500

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 3.000 h, SCM Accord 40 FX - CNC Machining Center for Timber Construction (Complete description see attachment) Used machine, year of manufacture: 10/2022 comprising: R21431 Accord 40 FX – Working area X-Y= 9000x1905 Z=350 mm (1 unit) OF0158 Usable Z-pass-through height = 350 mm (with H50 suction cups) (1 unit) OF0165 Rapid traverse speed along the axes of Accord 40 FX (PRO-SPEED version) (1 unit) OF0168 Pendulum operation (1 unit) OF0169 Automatic axis lubrication (1 unit) OF0299 TELESOLVE remote maintenance via Internet (1 unit) 450328 eye-M PRO control console with integrated PC (1 unit) 450291 Additional fixed operator panel (1 unit) 870068 TECPAD – remote control of machine functions (1 unit) 560058 No. 10 MATIC carrier rails - L1825 (1 set) 230237 MAXI – Prisma T machining unit (1 unit) 870031 Chip extraction device on the electrospindle, adjustable (1 unit) 870109 Preparation for angle head "Prisma T-S" (1 unit) 470014 Air nozzle for tool (1 unit) 870119 Tool length measuring device (1 unit) 870016 BRC – machining unit (1 unit) 510014 Preparation for clamping jaws H145 for table with 10 carrier rails (1 unit) 480178 Front stop row H110 for table with 10 carrier rails (1 unit) 480105 Rear stop row H110 for table with 10 carrier rails (1 unit) 480137 First side stop row H110 for table with 10 carrier rails (1 unit) Dcedpfx Aeyzgxcjkaen 480005 Suction cup H110 145x145 mm (12 pcs) 480006 Suction cup H110 145x55 mm, rotatable (8 pcs) 480018 Suction cup H110 145x30 mm, rotatable (5 pcs) 480049 Suction cup H110 200x40 mm, rotatable (5 pcs) 480149 First side stop row H145 for table with 10 carrier rails (1 unit) 480153 Second side stop row H145 for table with 10 carrier rails (1 unit) 480107 Round pneumatic clamping cylinders H145 (8 pcs) 480108 Square pneumatic clamping cylinders H145 (30 pcs) 480111 No. 6 lifting devices with double stroke H145 (1 set) 450289 Laser and reference stop H145 for curve (left) (1 unit) 350016 Vacuum pump 250 (300) m³/h – 50 (60) Hz (1 unit) 190046 PRO-SPEED safety system (1 unit) 210057 TRC 48 – rear tool magazine (1 unit) 210190 MACH 5 – quick-change device (1 unit) 870236 RTCP Setting – self-calibration system for Prisma machining unit (1 unit) Air conditioning for control cabinet (1 unit) 450288 Safety cover with vertical adjustment ON-OFF (1 unit) 210852 SCM angle head HSK 63E – Underfloor milling unit (1 unit) OF0438 Human–machine interface software (HMI) MAESTRO ACTIVE (1 unit) OF0543 Operating system Windows 10 embedded 64 bit (1 unit) OF0422 Machine control interface software Maestro cnc (1 unit) OF0435 Hardware key for Maestro cnc (1 unit) 524309 Maestro 3D-Advanced module (1 unit) 630359 Additional hardware key for Maestro cnc (for USB slot) (1 unit) 523687 ProView simulation software (1 unit) 109993 MACHINE LANGUAGE: German (1 unit) SPEC01 Special configuration: Special Accord, 9-meter working area in X SPEC02 Special configuration: 2 pieces, double-stroke lifting aids H145 SPEC03 Special configuration: Spare spindle Maxi-Prisma-T

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) Dcjdpfx Aoxwaz Hjkasn - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: baru, Tahun pembuatan: 2026, Otomat CNC untuk pengeboran dan pemasangan dowel secara otomatis penuh, untuk proses pengeboran, pemberian lem, dan pemasukan dowel secara otomatis. Pusat pemrosesan pengeboran dan dowel dengan keunggulan kompak, efisien, berkualitas, dan fleksibel. Presentasi singkat: • Mesin CNC multifungsi untuk pengeboran dan pemasangan dowel • Pemantauan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan papan dan kayu solid • Opsi tambahan spindle pengeboran horizontal dan vertikal Dsdpfxjdx R Dfe Akaecn • Mengurangi beban pada pusat pemrosesan CNC • Komplementer ideal untuk mesin nesting

Kondisi: bekas, nomor mesin/kendaraan: 008005, Lebar kerja maksimum: 2440 mm Dcodpfx Akewu Aacjaen

Kondisi: bekas, Tahun pembuatan: 2009, Numerical control unit POWER CONTROL PC 22 Machine suitable for the 1st and 2nd processing pass of the panel Dodpfx Akjpp Tkfjaecn Mobile, NC-controlled shoulder opening, motorized, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Anti-adhesive unit Time-controlled, automatic chip protection unit Double trimming unit Provision for group extension at each station Glue application unit with premelter and glue pot Automatic adjustment of edge pressure rollers Edge holder magazine with 2 positions End trimming unit with two motors Overlap cutting unit Corner rounding unit (FK group) Edge scraper unit Glue scraper unit Buffing unit Anti-adhesive unit