Mesin pengikat tepi

Ott PV6-F

Tahun pembuatan: 1995, Kondisi: baik (bekas), nomor mesin/kendaraan: 044092, Offer 22148 Psdpfx Aoiba R Nodisgp Technical Specifications: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Console for wall mounting

Kondisi: bekas, nomor mesin/kendaraan: 006279, Area kerja sumbu X: 3100 mm Area kerja sumbu Y: 1250 mm Permukaan kerja: meja nesting Pjdjkw H Ekopfx Adiogp Jumlah sumbu terkontrol: 3 sumbu Jumlah spindle bor: 11 Jumlah posisi alat: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-241-06-5232, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 12.608 h, ketinggian potong (maks.): 125 mm, lebar pemotongan (maks.): 2.200 mm, panjang pemotongan (maks.): 4.300 mm, Panel Saw Holzma HKL11/43/22 Lebar potong maks: 4300 mm Panjang potong maks: 2200 mm Tinggi potong maks: 125 mm Mesin gergaji sedang dalam penggunaan terus-menerus, sehingga memungkinkan untuk dilihat saat bekerja. Pgsdjxfvp Aspfx Adisp Mesin akan tersedia mulai 02/03/2026.

Tahun pembuatan: 1995, Kondisi: belum diuji (bekas), Connected load 380V 55A PMS control system Pre-milling unit 1961 Magazine 1901 Gluing station 1906 Pgodpfx Adonxkm Eeijp Pressure unit 1926K End trimming unit 1916 Flush milling unit 1962 Profile milling unit 1966, 3 mm radius up to 15 mm flush Radius scraper 1927 Contour milling unit 1983 Buffing unit 1941 Extraction connections 1x160 mm, 1x125 mm Compressed air connection 6 bar

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Podpfx Adsvymdqsiogp Equipment and technical data: Edge feed for coil and strip material Jointing milling unit with 2 milling heads Cartridge glue application system 3-roller pressure unit End trimming saw unit Radius milling unit Radius scraper unit Corner rounding unit Flat scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edgebanding thickness: 0.4-15 mm Maximum edgebanding height: 55 mm Minimum strip edgebanding length: 350 mm Maximum edge overhang per side: 3 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 12.5 m/min. Machine dimensions (L x W x H): 6,480 x 1,250 x 1,690 mm Availability: short notice Location: Flörsheim

Kondisi: bekas, nomor mesin/kendaraan: 006042, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem lem: EVA Edge join milling: ya Unit multifungsi: ya Pgedpfx Adewacqleijp Unit milling atas: ya Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 40 mm Unit kerja: 9 unit

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Pgodpedh Tfgjfx Adijp Free space

Tahun pembuatan: 1999, Kondisi: baik (bekas), Edge Bander Biesse Polymac ERGHO 5, year of manufacture 1999 Biesse Italy S/N 80709 Max. panel thickness: 10–45 mm Min. and max. edge band thickness: 13–60 mm Max. thickness of edging material (roll): 0.4–3 mm Min. panel width: 50 mm Min. panel length: 150 mm Feed speed: 10/20 m/min Pedegtx Aqopfx Adiogp Technical specifications: - Glue pot VC 700 - End trimming unit 701 - Edge trimming unit RS 700 - Corner rounding unit CR 200 - Tilting trimming unit + chamfering RI 700 - Compact scraper RBK501 - Buffing unit SP700 - Edge sanding unit LV 700 Features: - Heated infeed guide - PLC control - Panel support guide - Large-diameter roller holder - Edge trimming device for 3 mm thick roll edges 400 V, 50 Hz CE marked Machine dimensions (L x W x H): 4950 mm x 1700 mm x 1530 mm Weight: 2,900 kg

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: completely overhauled Warranty: 1-year guarantee Technical Specifications: Left-side adjustable angle stop according to AGA 4383 Longitudinal Panel Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in machine base and pressure beam - Scoring saw adjustable from outside (no need to open safety cover) Saw Unit with Regulated DC Drive: - Precise positioning (e.g. for cut-outs) - Slowed immersion exit from the cut - Includes safety cover interlock, lamella curtain SZ 5008 - Offcut device SP 5004 – offcuts down to min. 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (individually switchable) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: threshold value of 2 mg/m³ significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher by servomotor - Table surface closed with Pertinax plates (suitable for narrow strips) - Feed speed: 25 m/min (safety restricted) - Return speed: 40 m/min - Table length: 3100 mm - Fence depth: 3100 mm Multi-microprocessor control - Integrated PC with hard drive - Operating system: LINUX - Interfaces: serial + parallel, USB - Network connectivity (including wireless LAN) - Optimize cutting plans in the office and send directly to machine Pjdpoxhg Ibofx Adiogp - Multitasking capable - Print function via USB - Remote maintenance via Internet (Remote Desktop, TeamViewer) - Multilingual dialog programming - 15” flat screen + multifunction keyboard - Swiveling control panel - Graphical display of cutting plans and workflows Additional Features: Angle stop table HP 5043 (front-mounted): - Machined steel angle, Pertinax table support - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front-mounted): - Pertinax support - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Kondisi: bekas, Tahun pembuatan: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch-screen Industrial feed chain 1 1/4" Jointing milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Flush trimming unit (top and bottom) RS-100 2-motor multifunction/form milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10–65 mm Maximum workpiece height with form milling unit (depending on profile): 35–65 mm Edge thickness, coil: 0.4–3 mm Edge thickness, strips: 0.4–22 mm (depending on the unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Pgedpfsv R Nk Uox Adijp Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10–14–18–20 m/min Central extraction connection: 200 mm Edge banding extraction connection: 80 mm Jointing milling extraction connection: 120 mm Glue tank capacity: approx. 3 kg Heating time with 1/2 fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim