Mesin pengikat tepi

Ott U 25. 8 - F

Tahun pembuatan: 2024, Kondisi: baru, EN Dksdpsih Sdgofx Adgog

Kondisi: baru, Tahun pembuatan: 2025, Heating output / nominal heat output: 21 kW For rooms of approx. 300 to 500 m³ (according to DIN 4108) Flue gas outlet: rear (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 l Required chimney draft: min. 12 Pa Filling opening dimensions (L x W): 300 x 340 mm Dodpfshvibzox Adgekg Weight: 375 kg Efficiency: 88.2 % Energy efficiency class: A+ The EWI-A 15G room heaters are type-tested according to DIN EN 13240, 15a B-VG (Austria), and LRV (Switzerland). They comply with the emission limits specified in the 1st BImSchV (Federal Emission Control Ordinance).

Kondisi: baru, Tahun pembuatan: 2025, Robland products are manufactured by Landuyt N.V., headquartered in Brugge, Belgium. BM-3000: • Grooving saw unit (maximum groove depth 10 mm) • 5 mm left drill bit for producing line boring holes • 20 mm drill bit for Minifix system installation • 8 mm milling tool for limited drilling and milling applications • 35 mm drill bit for hinge installations Dodpfxod Hz Nie Adgekg • Panel thicknesses that can be machined: 12–40 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Y-axis range: Drilling: 900 mm / Sawing: 850 mm Technical Data: • Y-axis travel • Drilling: 920 mm • Sawing: 860 mm • X-axis support: 3000 mm • Z-axis workpiece thickness: 12 mm – 40 mm • A-axis: 360° • Feed rate: 20 m/min • Minimum panel dimensions (X) 300 x (Y) 120 x (Z) 12 mm • The machine is equipped with a 4-position drill chuck and a saw blade • Maximum and minimum borehole diameters: 3 mm – 35 mm • Saw operates along the X-axis • Maximum groove depth with saw blade: 10 mm • Motor: 0.75 PS, 3x400 V / 3x230 V • Minimum required extraction capacity: 2300 m³/h

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Carriage length: 3200 mm Cutting width at rip fence: 1350 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 3000 / 4000 / 5000 rpm Dkjdpstnggysfx Adgeg Motor power: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 900 kg

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas),

Kondisi: bekas, Tahun pembuatan: 2003, Used machine Djdewka Nyspfx Adgokg Year of manufacture: 2003 Equipment and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure beam adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters, both conventional and climb milling Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feed for rolls and strip material Glue application system 1906: - Cartridge system with sensing nozzle - With automatic reloading - Suitable for PUR adhesives Pressure station 1816: - Driven roller - Pneumatic control of pressure station End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0° to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at the milling unit Corner copy unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - Plastic edges up to 3 mm - Chip collection box for radius scraper Flat scraper 1964: - Operation-controlled flat scraper - Air nozzle at the flat scraper Buffing unit 1940 Edge thickness for roll material: 3 mm Edge thickness for strip material: 5 mm Max. edge thickness for corner copying: 3 mm Workpiece thickness: 6–45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Workpiece support distance: 470 mm Support plate Ø for edge material: 800 mm End trimming knife for roll material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Suction connection jointing unit: 120 mm Suction connection milling unit: 70 mm Suction connection scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short-term

Kondisi: bekas, Tahun pembuatan: 2010, de Dkedpfxow I H Rke Adgjg

Kondisi: bekas, nomor mesin/kendaraan: 008131, max-breite-paneel-4400-mm Dkodpfxow Idh Hj Adgeg

Kondisi: baru, de_Bester Preis 4499 EUR (EXW Jonava, Litauen) Abmessung des Schiebetisches: 2200 x 375 mm Max. Schnittkapazität: 1500 mm Schnittbreite zwischen Sägeblatt und Parallelanschlag: 1140 mm Sägeblattdurchmesser: 400 mm Schnitthöhe (90°): 115 mm Schnitthöhe (45°): 105 mm Drehzahl der Hauptsäge: 4500/6000 U/min Dkjdpfjdnxydox Adgjg Durchmesser der Hauptspindel: 30 mm Sägeblatt schwenkbar: 0-45° Elektrisch gesteuerte Sägeblatthebung/-senkung Hauptmotor: 5,5 kW Vorritzsägeblatt-Durchmesser: 120 mm Drehzahl der Vorritzsäge: 7000-8000 U/min Vorritzsägendurchmesser (Achse): 20 mm Vorritzmotor: 1,1 kW Gewicht: 700 kg * Bei Verwendung des 400-mm-Sägeblatts muss das kleinere entfernt werden. Ein reduziertes Sägeblatt darf nur mit einer maximalen Hauptschutzabdeckung von 350 mm verwendet werden.

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Djdpfx Adjwx Aaqjgskg Condition: Machine was used in Germany and regularly maintained (last maintenance performed by Homag in 11/2024) Features and Technical Data: Minimum workpiece thickness: 12 mm Maximum workpiece thickness: 60 mm Minimum workpiece size (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) Minimum edge thickness: 0.3 mm (coil material) / 0.4 mm (strip material) Maximum edge thickness: 3 mm (coil material) / 20 mm (strip material) Feed speed: steplessly adjustable 18–25 m/min (frequency controlled) Type of glue: EVA hot-melt adhesive Glue application (pot / cartridge / nozzle): melting unit with granulate tank Glue volume / cartridge capacity: granulate tank, melting capacity 18–35 kg/h, level-controlled Heating-up time: approx. 8–10 min Edge magazine (slots): 2 coils (automatic coil change) Automatic edge change: yes (automatic via PC22, manual switching possible) Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment End trimming: Kapp unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) Flush trimming: via pre-milling unit, pneumatically adjustable Radius trimming: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) Chamfer / profile trimming: yes, via FK13 pneumatically adjustable Scraper: integrated in multi-finish unit MN21 Buffing: buffing unit in finishing aggregate FA11 Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW Workpiece preheating: available Separating agent spraying device: top / bottom, type 2929 (F.01) Extraction ports: multiple Ø 100 mm (individual extraction per unit) Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) Operating voltage: 400 V, 50 / 60 Hz CE / Standards: CE-compliant according to EC Directive 98/37/EC Dimensions / footprint: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor unit visible in the photos is not included in the scope of delivery! Availability: short notice Location: Lithuania