Mesin bor slot

Panhans 116 H

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources Djdecnw U Djpfx Adgjcb High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: bekas, weinig_powermat_700_2026 Dcjdpfoxpuufex Adgeb

Kondisi: sangat baik (bekas), Motor power: 1.2 HP, 400 V, 50 Hz Dcjdpovzramsfx Adgeb Speed: 2800 rpm Drill table size: 650 x 330 mm Cross adjustment: 300 mm Depth adjustment: 150 mm Height adjustment: 170 mm Table height: 880 mm Weight: approx. 280 kg

Kondisi: bekas, Tahun pembuatan: 2020, Used machine Year of manufacture: 2020 Features and Technical Specifications: Working Dimensions: - Workpiece thickness: 8–60 mm - Workpiece width: from 70 mm - Edge height: up to 8 mm - Edge thickness, roll material: up to 3 mm Feed: - Speed adjustable from 8 to 14 m/min, stepless adjustment Gluing Technology: - Glue system for granules - Glue pot located above the feed unit - Interchangeable pot HOMAG QA 65 N - Designed for EVA and PUR processing - Quick-change function Units: - Jointing milling unit - Pre-heating zone - Pressure station, NC-controlled - Front and rear end trimming with two motors - Station for flush, radius, and bevel processing - Corner rounding unit with two motors - Scraper units: profile and flat scraper Dcsdpfx Adoxz H U Ujgeb - Buffing unit Additional and Operating Equipment: - Integrated spraying unit - Air cushion table for workpiece support - PU pressure rollers - Mechanical infeed barrier - HOMAG powerTouch control interface - Right-hand machine version - CE-compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: short notice Location: North Rhine-Westphalia

Kondisi: sangat baik (bekas), Bandschleifmaschine LANGZAUNER Model LZG Approx. sanding table dimensions: 2500 x 800 mm Approx. sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of sanding belt Sanding belt cover on top Light bar for work area CE compliant Includes special sanding shoe Djdpfxouxnyuj Adgscb Includes extraction fan NEW GRAPHITE CLOTH Note for used machines: • Technical details and prior sale subject to errors. • Prices quoted are ex-location, loaded free of charge. • The machines have been cleaned and function tested. • All machines are purchased as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered with your address and telephone number!)

Kondisi: bekas, 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, maximum specific pressing pressure 2 kg/cm² Heating: 2 x 1.8 kW - Wide-belt sanding machine 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right run, speed 19 m/s - Panel saw / veneer saw / trimming saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Max. saw blade diameter 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control panel with main switch and emergency stop switches Machine mounted on chassis Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Dcodpfsxl Ha Sex Adgsb Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale No warranty is given on used machines; the following applies: "sold as seen" Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex stock

Kondisi: baru, Jumlah spindel: 6 unit Lebar kerja: 250 mm Tinggi kerja: 150 mm Dcsdpfx Adevnv Ubogjb Panjang meja jointer: 2500 mm Motor pengumpan: 4 kW Kecepatan pengumpan: 6-24 m/menit Berat: 4770 kg Dimensi (Panjang/Lebar/Tinggi): 4722x1860x1776 mm Mesin moulding empat sisi Kuper SWT XL-6 versi jendela dengan pengaturan aksial dan radial spindel secara elektronik. Bodi mesin berat, tidak mudah melintir dan minim getaran. Jumlah spindel: 6 Lebar kerja: 250 mm Tinggi kerja: 150 mm Panjang meja jointer: 2500 mm Kecepatan spindel: dikontrol frekuensi, 4.000 - 8.000 rpm Kecepatan pengumpan: 6-24 m/menit Deskripsi lengkap tersedia pada file PDF terlampir! (Data teknis sesuai informasi produsen – tanpa jaminan!)

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Features: - Sliding table made of anodised aluminium, including high-precision guide made of hardened and ground steel - Sliding table lockable in any position - Saw blade guard with swing-away feature - Extension arm with adjustable mitre fence including length compensation every 5° and at 22.5° - Mitre fence and excenter clamp - Belt switching for speed change from above (access via machine table) - Indicator lights for selected saw blade speed - 3-axis control unit via 15'' TFT touchscreen on a Windows platform, including 2,500 program memory slots, 2 USB ports, and 1 Ethernet network connector - Scoring unit with electro-motorised height adjustment and motorised axial pulse adjustment, including digital readout for height and width - Mitre fence with 3 position stops; 2 stops with digital readout, 1 stop analogue but digitally adjustable via linkage to one of the digital stops - Overhead control panel including automatic star-delta starting - Electrical system and safety devices according to CE standard Technical data: - Saw blade tilt: 0° to 45° - Table dimensions: 1,030 x 680 mm - Working height: 870 mm - Sliding table dimensions: 3,200 x 400 mm - Cutting length with scoring unit: 3,420 mm - Cutting width at rip fence: 1,300 mm Dodpjrrw Ucofx Adgecb - Max. cutting height with 500 mm blade: 90°: 177 mm / 45°: 133 mm - 3 speeds: 3,000 / 3,600 / 4,200 rpm - Motors: Main saw 7.5 kW / 10 HP / 50 Hz, scoring saw 0.55 kW / 0.75 HP - Sound level according to EN 27960: 84.4 – 2565086.3 dB(A) - Extraction ports: 1 x 120 mm, 1 x 100 mm - Mitre fence extendable to 3,400 mm

Kondisi: sangat baik (bekas), BRIDGE LOADER with DOUBLE LOADING STATION Dcsdpfsd Rg Dpex Adgeb Vacuum system (with its own pump) No. 4 vertical support columns for the upper crossbeam No. 1 upper horizontal crossbeam (for the movement of the motorized trolley) No. 1 motorized trolley, to which horizontal arms are connected No. 2 horizontal metal arms with adjustable vacuum suction cups No. 2 floor rollers for feeding panel stacks into the Loader No. 1 motorized roller table that feeds panels to the Unloader, also equipped with several crosswise motorized conveyor belts (at 90°). Approx. dimensions: 7232 mm. Separate electrical and control panel OMRON electronic control Perimeter safety and protection metal fences Working capacity (cycles/minute): approx. 16 - 20 Min./max. panel thickness: approx. 10 – 50 mm Minimum panel size: approx. 250 x 320 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: 23.3 kW

Kondisi: bekas, de-to-hu Dcedpfxjxmh U Hs Adgjb