Tekan tekan - Kolom tunggal

PEDDINGHAUS Hydraulic 300

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Dusdpofxyhfjfx Adujp Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Sheet thickness: 1.6 mm Pressing force: 4 t Duodpfxjftd Uao Adusp Blade length: 156 mm Angle adjustable: from fixed to fixed degrees Table area: 450 mm x 305 mm Total power requirement: manual operation Machine weight: approx. 95 kg Dimensions (L x W x H): 530 x 380 x 480 mm

Kondisi: baru, Cutting diameter: 170 mm Dusdpfx Adog Trvrjusp Bandsaw blade dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90° rectangular: 150 x 190 mm Cutting area at 45° rectangular: 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (L x W x H): 870 x 1,550 x 1,740 mm This metal bandsaw is equipped with an enclosed worm gear drive. Additionally, it features hydraulic pressure regulation and a base frame rotatable by 45 degrees. Other features include emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release device.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 21.572 h, nomor mesin/kendaraan: A3231E0369, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, produsen pengendali: Siemens, model controller: Sinumerik 840D SL, jenis laser: laser serat, produsen sumber laser: TRUMPF, model sumber laser: TruDisk 12001, daya laser: 12.000 W, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, ketebalan maksimum lembaran baja tahan karat: 50 mm, tebal plat aluminium (maks.): 40 mm, panjang meja: 3.000 mm, lebar meja: 1.500 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, kecepatan pemposisian: 140 m/menit, jenis pendinginan: air, Perlengkapan: Penandaan CE, alat penukar nosel, dokumentasi / manual, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, unit pendingin, de Dujdpfeyddbrjx Aduop

Kondisi: bekas, Tahun pembuatan: 1986, Winkelstahl 120 x 13 mm Dodpfx Adjt D Nz Aeueup

Kondisi: baru, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Welding Table / Perforated Table: Hole diameter: 28 mm The table is made from 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 - 890 mm Underside ribbed for reinforcement. Including floor bearing Accessories optional!! Surface flatness: 0.2 - 0.4 mm over 1000 mm. Duodjpk Iv Uspfx Aduep The table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.

Kondisi: bekas, Tahun pembuatan: 2020, nomor mesin/kendaraan: 031EP-2020, 24558 Technical Data: - Abrasive diameter: 150 mm - Grinding unit pivotable on articulated arm - Swivel radius of grinding arm: 2000 mm - Motorized dust extraction - Disc speed steplessly adjustable: 800 – 2200 rpm - Table dimensions: 1500 x 880 mm Dujdovazz Dopfx Aduep - Table height: approx. 920 mm - Drive: 400 V / 3.6 kW - Space required: approx. W 1600 x H 1600 x D 1600 mm - Weight: approx. 250 kg

Kondisi: sangat baik (bekas), For sale: well-maintained Helmerding eccentric press. Very little used! Duodpefdnw Hofx Aduep

Kondisi: baik (bekas), Tahun pembuatan: 2013, nomor mesin/kendaraan: 011-113081603, 23370 Technical Specifications: - Max. load capacity: 50 kg - Face plate diameter: 340 mm - Spindle bore: 25 mm - Face plate swivels via handwheel: 0 – 90° Duedpfx Aoq Ev R Sedusp - Variable electric rotary speed: 0.5 – 3 rpm - Clockwise and counterclockwise rotation - Incl. foot switch - Ground cable - Welding current transmission: approx. 350 A - Power supply: 230 V - Table height in horizontal position: 760 mm - Required space: approx. W 650 x H 760 x D 600 mm - Weight: approx. 150 kg

Kondisi: bekas, Sheet width - max.: 200 mm Dsdpfx Ajcxxn Eodueup Sheet thickness: 4 mm Space requirement approx.: 0.90 x 0.50 x 2.70 m - very robust manual lever shear