Gunting baja profil hidrolik + pelubang

PEDDINGHAUS Peddicat 360 H

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Power rating: 630 kVA Primary voltage: 20 kV Secondary voltage: 400 V Frequency: 50 Hz Voltage: 400 V / Hz Rated current: 18.2/24.2 A Weight: 2.6 t per unit Dimensions (L x W x H): 1.7 x 0.82 x 1.66 m DRY-TYPE TRANSFORMER – mounted on U-beam base frame Two transformers available for sale. Both come with an enclosure (currently disassembled, see photo). Blsdsv Szwcepfx Af Sec No. 1 No. 2

Kondisi: bekas, Tahun pembuatan: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400V, Dyn5-11-1 configuration, protection class IP23 or IP00, forced-air ventilation (AF), aluminium/aluminium windings, temperature monitoring unit, fully functional, in very good condition, 2 units available Blsdpequwtxofx Af Sec

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Bodpfxskvnumj Af Sjlc Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 600 mm Bsdek Hdu Dspfx Af Selc Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 – 3,150 rpm Stepless feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with traverse control, mechanical handwheels, rotatable tilting table ±45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.000 mm, berat keseluruhan: 820 kg, kapasitas angkut: 500 kg, This offer includes the following set (possibility to adjust device specifications or to purchase the vacuum lifter or jib crane separately): - Vacuum lifter for panels, suitable for panels such as: MDF, laminated, raw boards, chipboard, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling panels - Cylinder for tilting between vertical-horizontal positions - 6 suction cups Ø 200 mm - Frame construction allows adjustment of suction cup spacing to adapt to handled materials - Beam length: 2500 mm - Each suction cup equipped with a ball valve – allows individual suction to be deactivated - Compressed air impulse function prevents ‘sticking’ effect of materials - Individual X and Y axis adjustment of each suction cup - Operator controls all functions from console (control panel): - Aggregator on/off - Vacuum on/release - Electric hoist control via thumb lever – raising/lowering the lifter - Pressure gauge - Pneumatic supply – integrated vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE Certificate Stationary jib crane Technical specifications: • Column height: 4 m • Height under arm: 3 m • Arm length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: ~3 m/min • Any RAL colour available • Manual slewing • Manual trolley • Quadruple/double needle-bearing arm for smooth rotation • Electric chain hoist • CE Certificate INCLUDED IN THE PRICE: • Pillar jib crane • Single-phase electric hoist • Manual trolley • CE Certificate • Complete documentation Standard warranty: 12 months Bljdpsxln Drjfx Af Ssc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Large, semi-automated Polar 137 XT-Autotrim Pace cutting line with stack lift, jogging system with counting scale, gripper transport system, turning gripper, and unloader Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed in the jogger by the operator, jogged, and then transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as needed. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1,200 kg Equipped with continuously adjustable photoelectric sensors for automatic lifting or lowering. Jogging System RAH-4 with air-removal roller and rear-table discharge Working size up to 75 x 105 cm The jogged material is automatically discharged to the rear into the STR stacking rack. The Autotrans gripper transport system then takes over layer transport to the rear table of the high-speed cutter. Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting batches Gripper transport system POLAR Autoturn – clamp transport to rear-table loading and rotary gripper takes over the prepared cutting batch from the stacking rack or buffer table. Via air tables, which optimize the conveying process via an air cushion, the material is transported directly onto the rear table of the high-speed cutter and placed precisely in position. During transport, the cutting batch is held firmly by the grips, ensuring the batches remain perfectly square and aligned, even when pre-aligned, during transfer. Polar 137 XT-AT cutting machine with touch operation and Autotrim function for automatic trim waste removal beneath the front table. - Lowerable side gauge left (required for rear table loading), also allows formats with a diagonal of Bjdpfxjxd U Sas Af Solc

Kondisi: baru, BARBARIC B3 Vacuum Lifter, Pivotable, incl. Crane - Exhibition Unit - Includes: - BARBARIC uniWood UWL 3 Vacuum Lifter, 150 kg capacity Vertical and horizontal transport of flat, standard commercial panels (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - 90° tilting range with pneumatic tilting mechanism - Complete configuration with hoist and corresponding safety features (vacuum gauge and hand slide valve with mechanical lock) - uniWood traverse with 2 suction cups Ø 270 mm on an adjustable beam (Beam length: 1,500 mm) Includes: - Reinforced version option BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction cups 500 x 250 mm on an adjustable beam (Beam length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version enables lifting materials up to 250 kg. Includes: - Comfort operation option BARBARIC uniWood All controls for the hoisting gear and vacuum lifter are integrated into a single control unit – our special handling grip. This allows single-handed operating of the system and guiding of the load. The lifting process can be infinitely controlled by frequency inverter. In the comfort configuration, complete with hoist and corresponding safety systems (vacuum gauge and 2-button safety operation for load release). Includes: - BARBARIC Column-Mounted Pivot Crane Load capacity at lifting device: 250 kg The stated capacity refers to the working load at the lifting device. Barbaric pivot cranes are designed for handling tasks in all application areas and are extremely lightweight. The kit consists of column, console, and low-friction jib. Pivoting and trolley traverse are done manually. Prerequisite for installation is a suitably rated concrete floor (C20/R5, at least 20 cm thick). Structural verification of the floor is the responsibility of the customer and must be documented accordingly. For installation on cracked concrete or weak subsoil, we can provide larger base plates on request. Fixing: Supplied with adhesive anchor for concrete floor. If ordered without lifting device, please specify cable or hose feed requirements! Delivery includes: trolley, energy supply system, and compressed air connection. Bjdpfx Aju R Szasf Solc - New exhibition machine -

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 527, 23035 Technical specifications (approx.): - Punching force 30 T - Max. sheet thickness 10 mm - Max. punching diameter 105 mm Blsdpfx Afslnkc Us Soc - Punching capacity: - e.g., steel sheet: 105 mm in 1.5 mm; 45 mm in 5 mm - e.g., stainless steel sheet: 90 mm in 1.5 mm; 45 mm in 4 mm - Stroke 7 – 70 mm - Throat depth 560 mm - Max. number of strokes 120 SPM - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - Equipped with: - back gauge table with stops - foot switch - emergency stop button - quick-change punch tool device - various punch and die holders

Kondisi: siap digunakan (bekas), With hydraulic pump. Bsdpjhw E D Ssfx Af Solc

Kondisi: baru, Pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Stroke rate: 130 strokes/min Ram area: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space required approx.: 1.4 x 1.1 x 2.1 m Bledpfjb U Hwtex Af Sjc - Hydraulic clutch-brake combination - Central lubrication system by Vogel - Cam controller by Balluff - Control cabinet with touchscreen - Height-adjustable table - Foot switch