Mesin hobbing roda gigi

Pfauter P160 H/I

Kondisi: bekas, Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, translation_de_hu_001 Ppedpfoyfq E Hex Al Ijr

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Pjdpoxwdygsfx Al Iepr Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° Ppedpfx Alevt D D Us Ijr - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition

Tahun pembuatan: 1967, Kondisi: baik (bekas), Bandwidth: 300 - 1,250 mm Strip thickness: 0.5 - 3 mm Blade shaft diameter: 180 mm Pjdpfx Aod Ha Irjl Ispr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1985, Mazak Slant Turn 40 MC CNC lathe with chip conveyor. Year of manufacture: 1985, weight: 8 tons. Fitted with Mazatrol T3 control, three-jaw chuck, tool turret, and tailstock. The machine is in operational condition and can still be inspected under power. Pedpfxevzgyho Al Ispr

Kondisi: bekas, Tahun pembuatan: 1994, Turning diameter 570 mm Turning length 2000 mm Control: Sinumerik 805 Siemens Max. swing diameter over cross slide 365 mm Main spindle speeds: 3-2,500 rpm Main spindle drive power 15/19 kW Spindle bore 62 mm Spindle nose DIN 55027 No.8 Tailstock taper MK 5 Quill stroke 190 mm Quill diameter 80 mm Feed range – longitudinal and transverse 0.01-50 mm/rev Podpfxsu Sbkgs Al Iopr Total power requirement 50 KVA Machine weight approx. 5 t Space requirement approx. m Incl. Forkardt chuck F315 Incl. 6 pcs Multifix holders Incl. 1 pc closed steady rest Incl. 1 pc open steady rest

Kondisi: bekas, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Internal spindle taper MK 4 Table diameter 160 mm Pedpstycg Sofx Al Ijpr Table bore diameter 75 mm Strokes per minute 355 – 630 spm Feed range 0.008 – 0.4 mm/stroke Space requirement approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg With rack cutting attachment Change gear set Year of manufacture: approx. 1981

Kondisi: bekas, Tahun pembuatan: 1996, spindeldurchlass-80-mm-traub-tna400 Ppodjxbtqvopfx Al Ier

Kondisi: bekas, Tahun pembuatan: 2004, de-en-hu-it-lt-lv-nb-nl-pl Podpsvi Ninjfx Al Iepr

Kondisi: sangat baik (bekas), Tahun pembuatan: 1980, Dentatrice-filettatrice horizontal untuk roda gigi, poros beralur, worm gear, ulir, pinion hingga panjang 5 meter, lengkap dengan 3 kepala milling model APFW - APGS - APG, rangkaian roda gigi, berbagai lunette, dan pembagi. Ppsdpeyba Rwjfx Al Isr