TEKAN REM

Placke HQPB M4 125 to. x 3.100 mm

Built for a globally leading cooperation partner.

Last machine from the pool.

Machine in like-new condition.

The High Quality Press Brake (HQPB) represents the top model of the Placke press brake range. Complete manufacturing, from hydraulic cylinder assembly to electrical control cabinet construction, is handled in-house. By combining state-of-the-art technology with years of expertise in forming technology, the HQPB series enables bending at the highest level. Even the standard configuration is delivered as a fully operational press brake. This package of safety, reliability, and efficiency—coupled with straightforward operation—allows us to meet the highest level of demands and accuracy in the bending process.

Machine Body:
- Base machine manufactured from S 355 N steel
- Uprights welded with 2 pressure pipes and top-mounted oil reservoir
- Above-floor design
- Paint finish: two-component textured paint in light grey (RAL 7035) and signal grey (RAL 7004)

Upper Beam:
- Ram, stress-relieved annealed
- Penetration depth measuring, reading head guided by ball rail system
- Separate Y1/Y2 control, electric angular misalignment monitoring

Hydraulic System:
- Proportional hydraulic control valve with electronically monitored cylinder synchronization
- Full steel cylinders with induction-hardened piston rods
- Low-noise internal gear pump

Tool Clamping:
- Upper tool holder WILA system, hydraulic clamping system, type NSCL-II-HC, fully hardened
- Max. load: head-bearing = 250 t/m, shoulder-bearing = 300 t/m

Lower Table:
Njdew Nhhgspfx Ab Nown
- Slim table incl. manual clamping strip, dimensions: 95 mm high, 95 mm wide
- Centrally adjustable CNC-controlled crowning device, WILA system NSCR-I-MC, with 2 mechanically adjustable wedge strips to compensate for deflection
- Single-V tool holder (13x20)
- Working height: 1050 mm (with 55 mm tool height)

Front of Machine:
- 2 front aluminum support arms, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are movable on a ball rail system and can be height-adjusted for dies from 55 mm to 100 mm via an elongated hole. The ball rail guide is milled into the lower table.

Control and Automation:
- Operating voltage: 400V / 3Ph / 50Hz
- Control and safety elements by Telemecanique
- Backgauge with AC servo technology
- Pilz safety PLC

Backgauge “2-axis controlled”:
- X and R axes CNC-controlled
- Z-axis manual

Delem DA 66 Touch control panel on swivel arm, incl. Profile S-Lite offline programming software.

Safety features according to CE standards

Technical Data and Working Range:
Bending force: 1250 kN
Working length: 3100 mm
Clearance between uprights: 2600 mm
Open height: 450 mm
Throat depth: 305 mm
Ram stroke: 265 mm

Ram speeds:
Rapid approach: max. 220 mm/s
Working speed: max. 9.8 mm/s
Return speed: max. 160 mm/s
Ram positioning accuracy: ±0.01 mm
Ram tilt: ±10 mm (electrically limited to ±5 mm)
Lower table height above floor: 900 mm
Motor power: 11 kW

Main dimensions:
Below-floor depth: 0 mm
Upright floor recess: 0 mm
Machine weight: approx. 9.5 t
Hydraulic oil tank capacity: 290 l

(Specifications subject to technical changes)

Lighting behind the machine:
Workspace illuminated by LED light strip between uprights.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.