Ekstraksi asap las Plymovent

Plymovent MDB BM-4

Tahun pembuatan: 2022, Kondisi: baru, Ostas 3-Roller Plate Bending Machine SBM 1270 x 95 Special Equipment Included in Price: - Hardened rolls - Motorized rear roll adjustment - Digital display Features: • Asymmetric 3-roller plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swing-out upper roll • Cone bending device • Foot switch Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (LxWxH): 2100 x 760 x 1250 mm Dsdsg Tzbhspfx Adgoul • Weight: 470 kg

Kondisi: baru, Capacity: 300 kg Dedpfju Uu T Rjx Adgoul Max. workpiece size: 500 x 200 x 20 mm Total workpiece weight: 200 kg Max. workpiece weight: 15 kg / piece Rotational speed: 22 rpm Filling level: 40-50% Colour: Blue, RAL 5015 Opening: 625 x 270 mm Total power requirement: 1.5 kW Machine weight: approx. 650 kg Dimensions (L x W x H): 1 x 1.7 x 1.29 m New deburring drum or deburring machine for safe and efficient deburring of workpieces. Hexagonal drum lined with 36 mm abrasion-resistant, vulcanised rubber, shutter for protection against the rotating container, robust design, easy to operate. Control panel with timer, hour counter, main switch, emergency stop and signal light. The maximum filling level is 40% of the container volume and corresponds to 300 kg, consisting of 200 kg of workpieces plus 100 kg of deburring media = high-manganese steel balls or cast iron pentagons. These are available from Sideros: high-manganese steel balls per 100 kg €400, cast iron pentagons per 100 kg €950. Dust extraction unit Sideros ECO A (Photo 8) available for a surcharge of €1,900 plus VAT. The manufacturer recommends sending approx. 100 kg of sample parts for testing to the factory in Italy before placing an order, in order to ensure optimal deburring results. Otherwise, the manufacturer does not assume responsibility for the deburring result. Warranty: 12 months for single-shift operation. In case of spare part shipment, defective parts must be returned. Machine downtimes are not covered. STOCKING DEALER WITH 1,600 m² SHOWROOM.

Tahun pembuatan: 2005, Kondisi: bekas, nomor mesin/kendaraan: SB205+206, Demag / Erikkila crane ceiling crane runway, dimensions approx. 13x7m Load capacity / lifting capacity: 2x 500 kg - 2x 0.5 t Technical data of the system: Runway made of 200mm Erikkila rails Running rails 13m, 2x bridges 7m The system is supplied complete: Rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Incl. 2x Demag 500kg PK chain hoists, lifting height approx. 3.5m Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection only with appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems with carrying capacities from 125kg to 1600kg also available. Please inquire about your runway with required capacity and dimensions without obligation. Dsdpjrwi Dzefx Adgoul

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, Perlengkapan: kabin, pencahayaan, lakovaci_strikaci_kabina_160x235 Dusdpfjia Taijx Adgsl

Kondisi: bekas, Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Wagner powder coating system for sale! Powder coating equipment, year 2010, includes the following components: Spray Booth: Prima Cube 16000 Powder Supply: Powder Center Powder Recovery: Cyclon Filter 16000 Reciprocator: KHG 350 Production Line Configuration INCLUDES: I. Specifications: Maximum workpiece dimensions: LxWxH = 2600 x 400 x 1850 mm II. Equipment: 1. Technological Conveyor, automatic, speed V = 1.2 m/min, adjustable between 0.5–2.5 m/min 2. Pretreatment Tunnel MNA-3-LPG, total length 16.7 m: - Loading zone length: 2.5 m a. Washing, degreasing, and phosphating; length: 3.6 m • Number of spray frames: 10 • Number of nozzles per frame: 18 • Total nozzles: 180 • Pump capacity: 162 m³/h • Pump power: 15 kW • Process tank: 4 m³ for active solution • Integrated heat exchanger with LPG burner, 160 kW • Operating temperature: 50°C • Mechanical oil separator • Solution filter • Metering system with diaphragm pump and regulator • Washing time: 3 minutes b. Drip-off section, length: 3.1 m • Drip time: 2 min 30 sec c. Primary rinse; length: 1.2 m • Number of spray frames: 4 • Nozzles per frame: 18 • Total nozzles: 64 • Pump flow: 38 m³/h • Pump power: 3 kW • Rinse tank: 1.5 m³ • Rinse time: 1 min c. Drip-off zone, length: 3.1 m • Drip time: 2 min 30 sec d. Final rinse; length: 1.28 m • Number of spray frames: 3 • Nozzles per frame: 18 • Total nozzles: 54 • Pump flow: 33 m³/h • Rinse tank: 1.5 m³ • Pump power: 3 kW • Spare spray frame included • Nozzles per frame: 18 • Final rinse time: 1 min e. Drip-off section, length: 2 m • Drip time: 1 min 40 sec - Three exhaust connections, each with ventilator - Process chamber made of stainless steel - Pipework in PVC or stainless steel (1 unit) 3. Automatic Dryer after Washing AST-1-KLPG: - Internal dimensions (LxWxH): 7000 x 3000 x 2800 mm - Air curtains on each side minimize heat loss - One indirect heat exchanger (LPG), rated at 200 kW - Three circulation blowers, total airflow 6000 m³/h each - Two exhaust duct connections - Temperature sensor and controller - Overtemperature sensor - Airflow monitoring sensor - Chamber in galvanized steel - 200 mm thermal insulation - Drying time: 10 min (1 unit) 4. Automatic Curing Oven APT-2-KLPG for Powder Coating: - Internal dimensions (LxWxH): 10200 x 3600 x 2800 mm - Air curtain on one side to prevent heat loss - Two indirect LPG-fired heat exchangers, each 300 kW - Eight circulation blowers, 6000 m³/h each - Two exhaust duct connections - Temperature sensor and regulator - Overtemperature sensor Dujdpfjww Adtox Adgol - Circulation monitoring sensor - Galvanized steel chamber - 200 mm thermal insulation - Curing time: 25 min (1 unit) 5. Overhead Rail Conveyor System ATR-ADAX for Powder Coating Line, includes: • Straight track with hangers, length: 146 m (hanger spacing 400 mm) • Drive station: 2 units • Tension station: 1 unit • Chain lubrication station: 1 unit • Structural drawings: 1 set

Kondisi: bekas, Tahun pembuatan: 1983, 4 x complete spray booths with drying ovens for buses. Fully operational with all walls/constructions and engines/burners. Dujdpfx Adewrpwvjgol

Kondisi: baru, Capacity 750 kg Maximum workpiece size 900 x 300 mm Total workpiece weight 550 kg Max. workpiece weight 30 kg/piece Rotational speed 22 rpm Filling level 50-60% Colour blue RAL 5015 Opening 1775 x 440 mm Total power requirement 3 kW Machine weight approx. 1,995 kg Required space approx. 2.9 x 1.33 x 1.75 m New drum-type deburring or descaling machine for safe and efficient deburring of workpieces. Suitable for heavy-duty applications. Hexagonal drum lined with durable, vulcanised rubber (thickness: 36 mm), cover with gas struts, roller shutter for protection against rotating drum, robust design, easy operation. Control via timer on the control panel, main and emergency stop switches. The maximum filling quantity is 40% of the drum volume and corresponds to 750 kg, consisting of 550 kg of workpieces + 200 kg of deburring media = hardened manganese balls (200 kg included) or cast iron pentagons. These are available from Sideros. Optional accessories: Dsdpev S Iq Aefx Adgoul Stepless speed control via frequency inverter approx. 13-22 rpm (3,200 €) Sound enclosure (65/70 dB), see photo 9, and Sideros ECO B2 dust extraction unit, see photo 8, available at extra cost. The manufacturer recommends that, for complex workpieces, 100 kg of sample parts of the material to be deburred are sent to the factory for testing prior to ordering. Otherwise, the manufacturer cannot assume responsibility for the result of the deburring process. VIDEO available on our website. Warranty = 12 months for single-shift operation. If replacement parts are supplied, the defective parts must be returned. Downtime of the machine is not covered. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: BO8xx, DEMAG KBK crane ceiling crane runway with dimensions approx. 6x5m (5m bridge) Multiple units of this crane available! Load capacity / lifting capacity: 500 KG - 0.5t Technical data of the system: Runway made from Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, carriages, end plates, brackets/hangers, etc. Crane equipped with internal power supply Including 500KG Demag chain hoist - lifting height approx. 3.5m - with trolley raised Crane is dismantled and immediately available Used condition, see pictures Location: 75053 Gondelsheim Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails in stock! Duedpfx Ajupvyvsdgjl Other KBK systems also available. Load capacity: 125KG - 1600KG Please feel free to inquire about your crane runway with your required load capacity and dimensions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Dust extraction unit, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-operated, suitable for plasma cutting, laser applications, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high efficiency. The unit is equipped with a pre-separator and a mechanical spark arrestor. The fan is located on the clean air side to minimize the risk of explosion. Brand: Donaldson Torit Model: DFPRO 12-CYCLO Year of manufacture: 2012 Filter cartridges: Donaldson Torit Ultra WEB – 12 pieces Filtration surface area: 215 m² Fan power: 18.5 kW Airflow capacity: 11,000 m³/h Vacuum: 3,900 Pa Inlet diameter: 500 mm Also available: New filter cartridges tailored to the unit’s application, made to order. Dimensions: Height: 5.00 m Length: 3.50 m Dodpfx Adoiypxiogeul Width: 1.70 m Weight: 2,200 kg

Kondisi: siap digunakan (bekas), Max. compressed air supply: 5 bar, operating temperature: -10 to 50°C, maximum power consumption: 200 W, with documentation. Duedpeiu H Itsfx Adgel