Ekstraksi kabut las yang dipasang di dinding

PLYMOVENT MF 3002-4700

Kondisi: bekas, Kaltenbach KKS 400 NA Mitre Cold Circular Saw Automatic Machine Machine No. 101701 Year of manufacture: 1983 Saw blade diameter: 400 mm Cutting capacity at 90° round: Ø 130 mm Cutting range at 90° square: 120 x 120 mm Cutting range at 90° rectangle: 305 x 20 mm Cutting capacity at 45° round: Ø 130 mm Cutting range at 45° square: 110 x 110 mm Dcjdpfx Aijd N H A Neush Cutting range at 45° rectangle: 245 x 30 mm Clamping range, vice feed: 30 to 140 mm Working height: 1000 mm Mitre cut: 0 - 180° Feed stroke: 600 mm Saw blade speed: 10 + 20 m/min, 2 steps Motor power: 1.7 and 2.6 kW Hydraulic motor: 1.5 kW Electrical connection: 380 Volt, 50 Hz - Hydraulic material vice feed with infeed roller conveyor on the left, 1500 mm - Double-stroke feed up to 1200 mm (feed twice, then cut) - Hydraulic material clamping with vertical pressure cylinder - Mitre cutting angle adjustable by hand - Hydraulic feed control, cutting speed adjustable manually - 2 motor speeds for the saw blade speed - Saw blade stroke infinitely adjustable - Coolant device with electric pump in machine base - Hydraulic unit fixed to the main machine - Piece counter with zero reset Saw dimensions (LxWxH): 2600 x 1200 x 1900 mm Saw weight: approx. 1400 kg Good condition

Kondisi: bekas, Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, ketebalan pelat baja (maks.): 3 mm, berat keseluruhan: 15.000 kg, tegangan masuk: 400 V, Sudut pembengkokan (maks.): 180 °, panjang kerja: 3.200 mm, jangkauan kerja: 3.200 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Technical specifications: Year: 2013 Working length: 3,200 mm Dcsdpewq Rumsfx Aiuoh Maximum sheet thickness (mild steel 400 N/mm²): 3.00 mm Maximum sheet thickness (stainless steel): 2.00 mm Maximum sheet thickness (aluminum): 4.00 mm Maximum bending height on four sides: 250 mm Upper beam stroke: 650 mm

Kondisi: baru, Tahun pembuatan: 2025, Martin sliding table saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Dsdpfxjv Erkaj Aiuech Sliding table length: 3.0 m Cutting width: 1,350 mm Rip fence adjustable via handwheel Standard cross-cut table with length stop for angled cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m T 6635/3-a Cutting width 1,350 mm T 6641-a Rip fence adjustable via handwheel T6660/1-a Standard cross-cut table for angled cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex stock 54634 Bitburg - Immediately available - Some images may show options that are not included in the offer.

Tahun pembuatan: 2024, Kondisi: baru, Power Guillotine Shear Technical Specifications Cutting Capacity: 2.5 mm Cutting Length: 2550 mm Cutting Angle: 1°40' Dcedjhk Nf Rjpfx Aiush Strokes per Minute: 35 1/sec Motor Power: 3 kW Backgauge Range: 550 mm Table Width: 400 mm Table Height: 850 mm Height: 1260 mm Width: 1350 mm Length: 3100 mm Weight approx.: 1,540 kg

Kondisi: baru, Saw blade diameter: 370 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 100 mm Cutting range at 90 degrees: rectangle 180 x 100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8 / 2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL PRICE!!! High-performance vertical circular saw, fully automatic hydropneumatic version. (20192) - Mitre cuts: left 60° / right 45° - Hydro-pneumatic saw unit control - Electro-pneumatic material feed unit - Smooth-running, high-performance worm drive with large transmission ratio, integrated in a sturdy cast housing for optimal cutting results - Vise with double clamping arm for low-burr cuts, also with side quick-change feature for mitre adjustment - Precision prism guide of the gearbox head, adjustable from the side - Extra-sturdy base frame with built-in automatic coolant system - Large chip drawer Dcsdped Iin Hjfx Aiuoh - Chip removal brush in the saw blade guard MPS Control System: - Storage of cut start / end positions - Display of power consumption, quantity, cutting time, etc. - Adjustable water cooling - Cutting pressure regulator NOTE: Price does not include saw blade! (Saw blade price: €204)

Kondisi: baru, Tahun pembuatan: 2026, ⭐️ LOAD CAPACITY FROM 1 TON TO 100 TONS ⭐️ ⭐️ DIMENSIONS – ANY DIMENSION AGREED WITH THE CUSTOMER ⭐️ ✅ Overhead bridge crane, also commonly referred to as a gantry crane or EOT crane (Electric Overhead Traveling crane), is a type of crane used in industrial environments. An overhead bridge crane consists of parallel runway tracks along which the bridge moves. A hoist, which is responsible for lifting the load, operates on the bridge. Dodjwr A Alopfx Aiujch ✅ There are many types of cranes, which are primarily divided into single-girder and double-girder overhead cranes. There are also standard cranes, European-type cranes, magnetic cranes, grab cranes, explosion-proof cranes, and others. ✅ Depending on the work environment and specific application, we select the most suitable crane to meet the customer’s requirements.

Kondisi: baik (bekas), nomor mesin/kendaraan: 5336, Load capacity: 6,000 kg Faceplate dimensions: 1,500 x 1,500 mm Tilting range: horizontal to -145° Rotation speed: 0 - approx. 1 rpm Electrical connection: 400 V, approx. 5 kW Dodpfx Ajgbt Sqsiuoch Space requirement: 2,800 x 2,350 x 3,250 mm Weight: 5,000 kg

Kondisi: sangat baik (bekas), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm Equipped with control cabinet according to VDE 0100 Main switch Synchronous welding controller 8033 Weight: 740 kg Dcsdehmvawspfx Aiujh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, sambungan udara terkompresi: 16 batang, lebar total: 387 mm, panjang total: 565 mm, tinggi total: 1.007 mm, berat keseluruhan: 75 kg, tekanan: 16 batang, tekanan kerja: 8 batang, tingkat kebisingan: 120 dB, panjang paket selang: 7.000 mm, High-performance dry ice blasting machine IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic granulator) for fine cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented IS 10 dry ice mill gives you the capability to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling gentle cleaning of sensitive surfaces such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any compressed air loss. Operating pressure ranges from 1 to 16 bar. The length of the compressed air supply hose is 10 m. The integrated flow system prevents freezing and blockages at the hopper outlet. The pipe and hose system design prevents pellet breakage. The blasting gun is ergonomically designed, robust, safe, and easy to operate. Optionally, the blasting gun can be supplied with an LED lamp. The stainless steel frame and machine housing ensure a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. Dcjdpfx Aiewum Svoueh The stainless steel filling hopper has a capacity of 13 kg. Dry ice consumption is 10–100 kg/h. Included accessories: - Round jet nozzle RN-10-08 - Nozzle case Flex Case II Plus (14-piece) - External module PAM-01 (7 m hose extension) - M306 protective helmet (with comfort face shield) - Ear protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10 m breathing air supply hose - Breathing air conditioning unit - Ice scoop

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, daya laser: 12.000 W, ketebalan pelat baja (maks.): 30 mm, tebal plat aluminium (maks.): 30 mm, ketebalan lembaran kuningan (maks.): 20 mm, ketebalan pelat tembaga (maks.): 15 mm, daya: 12 kW (16,32 hp), masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, en-DURMA Fiber Laser Cutting System HD-FN 3015: The Ideal Value-for-Money Solution. The DURMA Fiber Laser Cutting System HD-FN 3015 is the top choice for companies seeking maximum performance and efficiency at an unbeatable price. This state-of-the-art machine combines innovative technology with user-friendly operation, offering outstanding advantages for metalworking applications. Technical Specifications Laser Power: 12 kW With Automatic Shuttle Table Maximum Sheet Thickness: Mild Steel: 30 mm Stainless Steel: 25 mm Aluminium: 30 mm Copper: 15 mm Cutting Area: 3060 x 1525 mm Travel Axes: X-Axis: 3060 mm Y-Axis: 1525 mm Z-Axis: 125 mm (max. 275 mm) Sheet Panels Maximum Sheet Size: 3048 x 1524 mm Maximum Sheet Weight: 240 kg/m² Speed and Precision: Maximum Speed X-Axis: 100 m/min Maximum Speed Y-Axis: 100 m/min Maximum Simultaneous Speed: 141 m/min Maximum Acceleration: 14 m/s² Positioning Accuracy: ±0.05 mm Repeatability: ±0.05 mm Main Features of the System: ・Shuttle Table: Longitudinal positioning for optimal access to loading and unloading systems. ・Enclosed Cutting Area: Equipped with safety glass for maximum protection. ・CNC Graphic Control: User-friendly touchscreen for easy operation. ・Laser Source: Brilase 12 kW. ・Cutting Head: Automatic focus adjustment for precise cutting processes. ・Integrated Cooling System: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM Software: Enables programming, including auto-nesting for optimal material utilization. ・Positioning Laser: Assists with precise workpiece alignment. ・Sheet Detection System: Automatic recognition of sheet position and dimensions for enhanced process safety. Dedpfx Aisu E Tczjuoch ・Automatic Nozzle Cleaning: Ensures continuous cutting quality. ・Centralized Lubrication: For smooth and easy machine maintenance. ・Waste Box: For a clean working environment. ・Work Area Lighting: Ensures good visibility during operation. ・Multi-Chamber Extraction System: Effective removal of fumes and particles. ・Light Barrier Protection: Ensures safety at the shuttle table. ・Remote Maintenance Access: Facilitates remote diagnostics and servicing.