Sistem ekstraksi stasioner

Polytechnik A 800-45.0-G 6

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, equipped with STBB HAB S chip container, including complete documentation. Blsdpfxei A Ix He Apcei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, 1 Bsdpfxew S Tyao Apcoli

Tahun pembuatan: 2013, Kondisi: baik (bekas), Mesin Uji Universal Zwick/roll Tipe: 1488 Dimodernisasi tahun 2013 dengan perangkat lunak Daya uji maks: 200 kN Bodpsxw N Uvjfx Apceli Kebutuhan ruang: Lebar: 2.000 mm Tinggi: 2.100 mm Kedalaman: 800 mm Berat: sekitar 1.000 kg.

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), 4-sided planer Weinig, 7-head, universal, head arrangement: bottom horizontal, right vertical, left vertical, right vertical, top horizontal, bottom horizontal, and the last one universal. Drive is provided via cardan shafts. The drive is protected with Rotax couplings. Workpiece feed is pneumatic. Feed speed is smoothly adjustable by frequency inverter. Machine feed speed: 0–42 m/min. Motors: 2.5 kW and 7.5 kW. Table newly ground and new. Additionally, new cabling and new electrics. Machine after complete overhaul. Warranty included. Bodpfspqxnxjx Apcsli

Kondisi: sangat baik (bekas), Mesin ketam empat sisi Weinig Hydromat 23C Lebar kerja: 230 mm Tinggi kerja: 160 mm Jumlah spindle: 7 Blsdpoxlcufefx Apcei Konfigurasi spindle: 1. Bawah 15 kW 2. Kanan 7,5 kW 3. Kiri 7,5 kW 4. Atas 15 kW 5. Bawah 30 kW (ganda rip saw) 6. Bawah 7,5 kW (penopang hidrolik) 7. Atas 7,5 kW (penopang hidrolik) Kecepatan putar spindle: 6.000 rpm Diameter spindle: 50 mm 4 rol penggerak pada meja kerja Kecepatan pemajuan diatur dengan inverter hingga 36 m/menit Pemajuan didorong oleh poros kardang Penekan pneumatik Dokumentasi teknis

Kondisi: baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: belum diuji, lebar kerja: 220 mm, tinggi penyerutan: 120 mm, diameter spindel: 50 mm, lebar perataan: 220 mm, tinggi kerja: 120 mm, berat keseluruhan: 7.500 kg, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: tiga fasa, jumlah spindel: 10, daya: 105 kW (142,76 hp), frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 8–40 m/min, Spindle arrangement: 1 – Bottom (7.5 kW) – with hydraulic clamping 2 – Right (7.5 kW) 3 – Left (11 kW) 4 – Right (7.5 kW) – with jointer 5 – Left (7.5 kW) 6 – Top (15 kW) – with hydraulic clamping 7 – Bottom (7.5 kW) – with hydraulic clamping 8 – Top (7.5 kW) – with hydraulic clamping and jointer Bsdpfx Aju Udd Sopceli 9 – Bottom (7.5 kW) – with hydraulic clamping and jointer 10 – Universal (7.5 kW) 6 powered feed rollers in the table

Kondisi: bekas, Tahun pembuatan: 1977, Wurster und Dietz GDZ 600 GES, year of manufacture 1977 Passage width: 71 cm Stroke: 600 mm with oscillating frame with water-cooled guides with Jansen hydraulic saw tensioner with splitting wedge with saw blades with templates Bedjqpdi Ujpfx Apcsli with insert tray Available immediately Location: Austria, near Klagenfurt

Tahun pembuatan: 2025, Kondisi: baru, membrane-de-2024 Blsdji E Hp Topfx Apcoi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2010, Performance: 180 - 300 kg/h Briquette diameter: 50 mm Filling volume (hopper): 0.3 m³ Lubrication pump: 1.0 kW Motor power: 15 kW Demonstration machine with low operating hours - Automatic press for briquetting wood shavings and other waste materials - Pressure oil lubrication for highly stressed moving parts - Hydraulic clamping cylinder at the press clamp to improve briquette quality - Electric control system for all operating processes - The press head can be heated or cooled during the briquetting process - Requirements for input material: Moisture content: 8 – 14 % Particle size: 1 – 12 mm Technical data: - Total power consumption: approx. 22.0 kW - Pressure on piston: 2,000 – 2,500 kg/cm² - Vertical compactor screw: 1.5 kW - Lubricating oil volume: 50 litres - Feed screw to compactor screw: 0.75 kW - High-pressure pump: 0.55 kW Equipment: 1 Electric press head heating 1 Fan for press head cooling 1 V-dosing hopper for briquette press Heavy-duty steel construction Bsdpfx Aexy S E Nepcsli Inspection window Incl. bridge breaker (driven together with feed screw) Electro-mechanical level sensor 1 Cooling rail for briquettes, L=4.0 m Briquettes guided by round bar Complete with supports

Kondisi: siap digunakan (bekas), Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2000 mm Feed motor: 4 kW Feed speed: 5–24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 x right), reinforced motors, 8,000 rpm, ATS control system The machine will be cleaned and function-tested before delivery. Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom 5.5 kW (motor renewed) ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 125–180 mm Rabbetting device incl. tool Hardened table insert in front of the first bottom spindle 2nd spindle right 12.1 kW (motor renewed) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Bljdpfx Apsxz Hh Uecoi Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the left spindle, incl. lateral spring-loaded roller pressure 4th spindle right 8.3 kW (motor renewed) ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–250 mm Max. tool diameter behind fence: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 5th spindle top 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool circle diameter: 112–200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Divided pressure shoe in front of top spindle, adjustable to the tool circle and can be swung away from the tool, spring-loaded. 6th spindle bottom 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool circle diameter: 112–250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles general ----- All moulder spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5–24 m/min Infeed roller in front of first lower tool, pneumatically controlled high/low, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Axial adjustment of feed rollers relative to left spindle: 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380–420 V), 50 Hz. Machine frame, tables and fences ----- Jointing table 2.0 m long (incl. straightening fence) Manual Waxilit pump for table resin removal One driven rubber roller (spring-mounted in outfeed table) Two driven rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital display Outfeed behind the top spindle with mechanical digital display ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height 12 mm Electric height adjustment of top spindles and feed Centralized lubrication points on front of machine Electronic digital displays: Spindle 3 and 5 axial, spindle 6 radial, spindle 4 axial and radial Safety and Noise Protection ----- Full safety enclosure Easy high...