Las meja gilirannya, tabel Rotary

Protec KT 300

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Protec KT 300 H Welding Turntable, 170/400 Special Version Njdsrypmgjpfx Aglekt Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions Nkedpfx Ajd Ab H Hoglst • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Kondisi: baik (bekas), Tahun pembuatan: 2024, Welding positioner KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via geared motor from 0 to 90° Nedpobvk I Eefx Aglokt Speed: 0.3 – 2.5 rpm Incl. foot remote control Additional cost: Quick-change chuck Diameter 300 mm, €450

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Rotary Welding Table KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Nkedpfx Agec Ug Tlsljt Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via hand-crank gear motor, 0 - 90° Rotation speed: 0.3 to 2.5 rpm Including foot remote control Surcharge: Quick-release chuck Diameter: 300 mm, €450

Kondisi: baru, Welding Positioner Table 50 kg Model: KT-50 without chuck Maximum load (horizontal): 50 kg Maximum load (vertical): 25 kg Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Nsdsbambropfx Agljkt Turntable height: 375 mm Turntable tilt angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60 Hz Price does not include quick-action chuck and height-adjustable workbench. Surcharge for quick-action chuck: €195 Packaging and shipping within Germany: approx. €80

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, kendali jauh kaki, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Njdpfjvbrqxox Aglekt Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional)

Kondisi: baik (bekas), Welding positioner KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Nksdsb Dymhspfx Agljt Height: 500 mm Tilt range: stepless via geared crank motor 0–90° Speed: 0.3–2.5 rpm Includes foot remote control Optional at extra charge: Quick-change chuck Diameter 300 mm, €450.-

Tahun pembuatan: 2016, Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, dalam proses overhaule, waktu pengiriman akhir Januari 2026, garansi 12 bulan - Suhu maksimum 200°C; suhu dapat ditingkatkan hingga 250°C sesuai permintaan - Dimensi dalam: L 1000 x D 1000 x T 1500 mm - Dimensi luar: L 1765 x D 1425 x T 2300 mm - dengan controller Jumo Dicon Touch - Rel masukan untuk pemuatan oven Nodpfx Asvk Navjglekt - Daya pemanas 36 KW - Berat sendiri: 780 kg - Konektor knalpot; kipas buang dan katup elektrik dapat dipasangkan sesuai permintaan - Troli pemuatan sesuai permintaan (gambar) - Dokumentasi, deklarasi CE Pemasangan dan commissioning dapat kami tawarkan sesuai permintaan. Kunjungan dapat dilakukan di gudang kami dengan perjanjian terlebih dahulu. Oven, oven industri, oven pengeringan, oven pemanasan, oven temper, oven kamar, oven hardening, pengering sirkulasi udara, oven proses, kabinet pemanasan, oven pembakaran, pengering sirkulasi.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 300 kg, Perlengkapan: kendali jauh kaki, Protec KT 300 H welding positioner, model 170/400, special version with hydraulic height adjustment with safety lock to prevent lowering Lifting capacity of the hydraulic platform: 500 kg Horizontal load: 300 kg, tilted load: 150 kg Nkjdswz Rfgjpfx Aglst Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Hjdpz Aevbrqxsq A Tjnp Welding current transmission: 400 A Quick-change chuck, diameter 300 mm, surcharge €550 Quick-change chuck, diameter 400 mm, surcharge €750 Mobile hydraulic height adjustment, surcharge €650 (with locking castors) Counter bearing, yellow, stepless height adjustment: €250 Crank gear motor, 0–90° stepless adjustment Stepless speed adjustment from 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (optional as required)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 300 kg, Welding positioner APS 300, fully functional with chuck Infinitely variable speed adjustment approx. 0.01 - 3.5 rpm Njdpfx Agovnz Iysljkt Swivel range approx. 180° Height horizontal approx. 1100 mm Height tilted approx. 900 mm

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000 Nkedpfxed Ixadj Aglot

Kondisi: hampir baru (bekas), Welding turntable KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted (to center): 450 mm Length: 650 mm, width: 650 mm Nkodpfodylk Hex Aglot Stepless tilt adjustment via crank gear motor: 0 – 90° Rotational speed: 0.3 – 2.5 rpm Incl. foot remote control Optional extra: Quick-clamping chuck diameter: 300 mm, €450

Tahun pembuatan: 2020, Kondisi: hampir baru (bekas), Welding rotary table KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, Width: 650 mm Nkodped A Etwofx Aglot Stepless tilt range via crank gear motor: 0 – 90° Speed: 0.3 – 2.5 rpm Including foot remote control Optional: Quick-change chuck Diameter 400 mm, €550.-

Kondisi: baru, Semiautomatic band saw for high-performance and highly precise cutting of medium-sized solid bars and profiles. The robust construction provides the machine with the necessary rigidity and cutting unit precision. Band operation is via a two-speed motor and a special reduction gear with bronze gear and tempered, ground worm screw. Nkjdpfsfibd Tox Agljt Flywheels are appropriately dimensioned. Sturdy band guides made with sealed ball bearings and adjustable carbide (Widia) plates. Blade tension is achieved by an electromechanical device with a micro-switch blade rotation control. Safety devices are installed on the flywheel covers and the blade for operator protection. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repeated cuts to the same length Band cleaning device with brush Hydraulic power unit motor: 0.37 kW Electric pump for band coolant: 0.09 kW Vice jaw height: 200 mm Vice jaw length: 185 mm Worktable height: 760 mm Machine weight: 820 kg

Tahun pembuatan: 2018, Kondisi: baik (bekas), Welding positioner KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless via geared motor with hand crank, 0 – 90° Rotational speed: 0.3 – 2.5 rpm Incl. foot remote control Njdpfx Ageb Dg Arjlokt Optional extra: Quick-change chuck Diameter: 300 mm, €450