150-300 bar 30-75 lpm tekanan tinggi pencuci

PTC Salmon

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, High-pressure cleaning unit, high-pressure flushing system, high-pressure built-in washer mounted on a hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. Comparable to PTC Salmon but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank (LxWxH): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (LxWxH): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (LxWxH): approx. 1,670 x 1,250 x 1,200 mm Unladen weight without water tank: approx. 370 kg Unladen weight with 400 l water tank: approx. 400 kg Unladen weight with 800 l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar Kedpfx Aleiky H Se Aonb ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max power: 26 HP (19 kW) CONTROL PANEL: - Start button - Hour meter - Electronic fuel level indicator - LED indicators for oil temperature, low lubrication oil pressure, clogged air filter, RPM gauge, generator, and glow plugs - Emergency stop button ELECTRICAL CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - RPM control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage protection to prevent high-pressure pump dry run, with automatic shutdown. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, pressure control valve, and pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½" and 80 m 3/8" high-pressure hose - Hose: 80 m ½" high-pressure hose (included) - Hose guidance: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: Manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾" low-pressure hose - Hose: 35 m ¾" low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration grade: 50 mesh SCOPE OF DELIVERY: - IMET multifunction radio remote control; - Engine on/off; - Bypass on/off; - RPM control +/-; - Hydraulic hose reel wind/unwind; - Emergency stop button; - Battery charger for radio remote control; - 400 or 800 l polyethylene water tank (with steel frame); OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½" high-pressure hose; - 50, 60, or 80 m 3/8" high-pressure hose with G3/4" connector; ACCESSORIES ON REQUEST: - STORZ kit for connecting to fire hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel, and quick coupling; - High-pressure lance kit with 15° flat jet nozzle / rotating nozzle; - High-throughput lance kit; - Rotating nozzle kit; - Double head nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning device; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Other accessories available on request.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tekanan kerja: 250 batang, bahan bakar: super 95, berat keseluruhan: 56 kg, masa garansi: 24 bulan, en_001 Knodpfxewiwv Io Al Asb

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, This listing is for information purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with front loader, powered by a 5.5 HP petrol engine. With a payload of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, and renovation work, as well as similar applications. It is capable of operating safely on slopes of up to 20 degrees. The robust steel skip, with a capacity of 0.196 m³, can be hydraulically tipped and is suitable for a wide range of tasks. The GP500 PRO features an oil cooling system as well as a foldable operator platform. The machine is manufactured under the supervision of European technicians – built on a solid frame, it is suitable for use in a variety of conditions. Comprehensive after-sales service is also guaranteed after the warranty expires. TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip capacity: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Discharge: hydraulic Starting system: electric Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Loading reach at max. discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm Knedpoyk Sl Sofx Al Aeb ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil capacity at change: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: €3,300 net €3,927 gross

Tahun pembuatan: 2002, Kondisi: bekas, Balpe SAS Ksdpjb Uanqjfx Al Aonb Modell: 9PL/20 Seriennummer: 88 Edelstahl, 9 elektrisch beheizte Abschrägplatten, Durchmesser 200 mm, Temperatur einstellbar.

Kondisi: hampir baru (bekas), Mantle Packaging Knedpfx Alofg Agre Aob Edelstahl-Handschalenversiegler, Doppel-Schalenbetrieb, Temperatur- und Zeitschaltuhren, Schalenmaße 270 mm x 280 mm, 1-phasig

Kondisi: diremaj di bengkel (bekas), K.H.D. Calibrator 1300H. Without frame. Equipped with hydraulic unit, electric motor, and Voith turbo coupling. Fitted with new cones and mounting sleeves. Overhauled, sandblasted, and painted. Kjdpfx Asvt Su Ijl Asnb

Tahun pembuatan: 2024, Kondisi: baru, Overband plate magnet with cleaning mechanism Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer Dimensions: 800 x 500 x 180 mm 4 x M16 lifting eyes on the rear side These two lifting magnets were previously used by one of our customers as 'police magnets' in the meat processing industry. Knjdpfx Aohfwmdsl Asb Both overband magnets are in excellent condition. The stated price applies to one unit. Currently, 2 units available for immediate delivery from stock! All information subject to change, only while supplies last! Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Our core competence is providing customers with exactly what they truly need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone as well to find a suitable solution for your application. Overband plate magnet Design: stainless steel VA 1.4301, fully welded Includes cleaning drawer 420 x 420 x 200 mm 420 x 420 x 250 mm 620 x 420 x 200 mm 620 x 520 x 200 mm 800 x 500 x 200 mm 800 x 520 x 250 mm Fully welded stainless steel housing to protect the magnet core Lifting eyes for suspension Cleaning drawer for easy removal of collected foreign material. Suitable for installation above all types of conveyor systems...

Kondisi: bekas, Vertical Multistage High-Pressure Centrifugal Pump GRUNDFOS As-new pump, but part of the magnetic coupling has been removed. Type: CRN 10-09 MP-FGJ GI-V Year of manufacture: approx. 2012 Performance at 7.2 bar: max. 10 m³/h Head: max. 91.8 meters Power supply: 400 Volt, 50 Hz Power: 3 kW Ksdefupadepfx Al Asnb - 9-stage pump construction - Made of stainless steel 1.4401 - The pump is as new and was used as a parts donor, but includes several new pump chambers - Part of the magnetic coupling is missing Suitable for drinking water supply, irrigation, and drainage Packed in original wooden crate Pump dimensions (LxWxH): 1100 x 250 x 300 mm Shipping crate dimensions (LxWxH): 1400 x 330 x 340 mm Weight with shipping crate: 85 kg As new condition Not a submersible or immersion pump.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 5.800 h, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 160 kW (217,54 hp), jenis pendinginan: udara, daya: 260 kW (353,50 hp), kapasitas pemanasan: 160 kW (217,54 hp), Trane 4-pipe air-cooled chiller for simultaneous cooling and heating Kedpfx Aewy Dn Sjl Aenb Cooling capacity: 160 kW, 2 circuits with 4 scroll compressors (frequency-controlled) R410A refrigerant, plate heat exchanger, with 2 integrated pumps tested, ready for operation

Tahun pembuatan: 1990, Kondisi: baik (bekas), Compressor unit with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Knodpfoinur Ajx Al Asb Height: 1,000 mm Capacity: 1.5 m³/min Power: 11 kW