250-350 bar 23 l/menit.

PTC Torpedo

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 1 h, - High-Pressure Cleaner PTC Torpedo Compact 21/250, 21/350 and 15/500 – similar but not Dynajet, Oertzen, Falch, etc. - Cold water / hot water approx. 95°C and steam 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only for 250 and 350 bar versions) with chemical-free weed control function at approx. 99°C The following models are available: - Torpedo Compact 23/250 | 23 l/min at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter Laedpfodqkrwsx Am Ejh - Torpedo Compact 16/500 | 16 l/min at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and unladen weight without water tank: 1205 x 1250 x 1330 mm, approx. 280 kg - Dimensions and unladen weight with 300 l water tank: 1250 x 1900 x 1330 mm, approx. 350 kg - Dimensions and unladen weight with 500 l water tank: 1250 x 1900 x 1330 mm, approx. 350 kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers - Operating hours counter - Pressure gauge - Pressure regulator - Safety valve - High-quality, painted steel frame with forklift slots - Stainless steel covers - Magnetic descaling device - Including 20 m high-pressure hose, spray gun, lance and 25° fan jet nozzle - Additional accessories such as frame for water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotary nozzle, sludge suction pump, steam nozzle, weed control lance and boom available on request

Kondisi: bekas, Tahun pembuatan: 2013, Gambaran Umum Sistem produksi bir ini, yang terdiri dari penggiling malt dan penukar panas pelat, diproduksi pada tahun 2013 oleh perusahaan Spanyol, Slowbeer. Sistem ini terdiri dari sistem produksi bir 2-ketel (tangki pengadukan dan ketel perebusan), penggiling malt, dan penukar panas pelat, serta dirancang untuk seluruh proses pembuatan bir, termasuk pengadukan, perebusan, dan proses whirlpool. Data Teknis - Kapasitas: 250 liter per batch - Aplikasi: Pembuatan bir - Konfigurasi: Sistem produksi bir 2-ketel (tangki pengadukan + ketel perebusan), seluruh proses pembuatan bir (pengadukan, perebusan, whirlpool) - Sistem pemanas: elektrik - Pengaturan suhu: Otomatis - Sistem keamanan: Alarm keamanan termal - Pendinginan: Penukar panas pelat Laedpfx Ajyw Abfjm Esh - Catu daya: 400 V, tiga fase - Daya terpasang: 15 kW Lingkup Pengiriman - Sistem produksi bir (2 wadah) | Tidak termasuk dalam lingkup pengiriman | MB 250 E | 2013 | Tangki pengadukan dan ketel perebusan, pemanas elektrik, pengaturan suhu otomatis - Penukar panas pelat | Sondex | S4A-IG16 | 2013 | Luas perpindahan panas: 0,63 m², tekanan desain: 10 barg, volume: 1,5 l, suhu desain: 0 – 100 °C - Penggiling malt | Sommer | Piccolo 11S | 2013 | Kapasitas 100–150 kg/jam

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam, similar but not Dynajet, Oertzen, Falch, ... - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfection purposes Lasdpfxsfh Skae Am Eoh The following models are available: - TORPEDO MINI-E 3.8 M 230Volt/50Hz Powersteam 8 l/min at 150 bar - TORPEDO MINI-E 5.8 T 400Volt/50Hz Powersteam 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98cm, approx. 150kg - Incl. 10 m high-pressure hose, spray pistol, lance, and 25° fan jet nozzle

Kondisi: baik (bekas), - Material: AISI 304 / upper bottom AISI 316 Dimensions: - Depth: approx. 1600 mm - Width: approx. 1750 mm - Shell height: approx. 2500 mm - Ground clearance: 280 mm - Overall height: approx. 3200 mm Equipment: - Rectangular manway 420 x 540 mm - Residual drain: disk valve NW 40, Friedrich no. 2 Ø 40 mm - Clear drain: disk valve NW 40, Friedrich no. 2 Ø 40 mm Lasdpfowff N Iox Am Eoh - Level indicator - Sample tap - Thermometer - Dome NW 500

Kondisi: bekas, Pabrik biodiesel bekas buatan Biodiesel Fuels Equipment Ltd UK tahun 2012, dihentikan operasinya pada 2021. Kapasitas pabrik 10.000 liter/8 jam kerja hingga 25.000 liter/hari jika beroperasi selama 24 jam. Pabrik ini digunakan untuk mengolah minyak bunga matahari dan minyak sawit bekas. Ljdoyhc Rgepfx Am Eeah Perlengkapan meliputi: (3) separator, (2) reaktor, (2) ioniser, (2) tangki persiapan minyak, (1) tangki persiapan metanol, (1) tangki biodiesel.

Kondisi: bekas, nomor mesin/kendaraan: 5063, System: Used Decanter / Centrifuge Manufacturer: KHD Model: Full Mantle Screw Centrifuge Type: CP 3-0.1 Machine No.: 5063 Max. permissible speed: 2,950 rpm Drum inner diameter: approx. 530 mm Drum wall thickness: 12.5 mm Lasdsddzm Tepfx Am Eeh Drum material: W 2 Gearbox: internal hydraulic gearbox Hydraulic drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total weight: 2,400 kg Purchase and rental possible.

Kondisi: baru, Tahun pembuatan: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator is engineered for demanding applications and effectively handles challenging materials that disrupt separation processes in commonly available market separators. SWZ water separators specialize in separating heavy fractions (non-ferrous metals) from plastics and other materials during secondary raw material recycling processes. The SWZ separator is fitted with a four-section copper water system featuring radial nozzles with adjustable linear geometry. The unit incorporates the latest generation divided separation mat. A modern pre-separation and material preparation module ensures rapid recovery and high purity of reclaimed materials (plastics, metals). Why use a water system? Our device utilizes a system inspired by gold recovery technology. Water acts both as a medium and a gentle separating force on materials. Heavier particles are gently washed and separated, ensuring no losses throughout the process. The unique properties of water, combined with our proprietary solutions, outperform traditional air separation technologies. SWZ-type separators are used for: - Separation of heavy and light materials (such as metal granulates contaminated with plastics, film, paper, cotton, fibers) - Cleaning plastics following air (dry) separation processes - Separation of metals in cable and non-ferrous recycling lines The SWZ-700 water separator, equipped with the latest module, achieves rapid processing, offering a high throughput of approximately 1200 kg/h. Operation description: Material enters the separator via the conveyor chute, reaching the module for initial fractionation based on mass and moisture parameters. Some material is separated during this initial stage. In the second module segment, the moisture content of the batch is further adjusted. Material then descends onto the separation table for final fraction sorting. This process yields recoverable materials on both sides of the separator. Construction features: The robust structural frame and inertia drive are constructed of materials selected to resist overload from vibration. The supporting frame offers excellent rigidity for reliable, long-term service. Thanks to the vibration drive design, no soil isolation is required. The separation table features hydraulic adjustment for angle of inclination, as well as a dedicated module for initial pre-fractionation and preparation. The water system includes multiple pressure valves, and its circulation is closed-loop—no continual external water supply is required as the system operates with recirculated water from onboard reservoirs. Lajdpfx Asua Tbwom Eeh Our separators are tailored to the specific nature of your material, based on extensive expertise and ongoing laboratory research. Available in various models and sizes, each SWZ-700 separator is custom built to order.

Tahun pembuatan: 2020, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), High-Pressure Cleaner PTC CJ-1E (not Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner) - Operating Pressure: 110 bar - Flow Rate: 12 l/min - Motor: Electric, 4-pole, 230V, 2.2 kW, 1400 rpm - Dimensions: 540 x 440 x 680 mm - Weight (empty): approx. 40 kg - High-pressure Pump: Comet three-piston pump with ceramic pistons - Durable injection-moulded plastic housing - Practical holder for spray gun and lance - Self-priming pump with EASY-START feature - Handle with holders for power cable and high-pressure hose - Easy maintenance via simple removal of the front cover Ledpfxogcbzcj Am Eoah - Large wheels (220 mm Ø) for easy movement on steps and rough terrain - Pressure gauge - Integrated professional unloader valve - Delayed Total Stop - Pulsation system - Rotary switch - Thermal motor overload protection - Manual stainless steel hose reel with 30 m 1/4" high-pressure hose - 2 pcs 1/4" F pipe cleaning nozzles - Spray gun with lance and flat spray nozzle The CJ-1E is a mobile high-pressure cleaning unit, ideal for cleaning and unblocking pipes with diameters from 30 to 120 mm. Equipped with a 2.2 kW, 230V electric motor, it can be used in apartments, houses, or commercial premises for sinks and toilets, as well as for garden and general cleaning applications. The Comet LW-K pump with Easy-Start and pulsation feature ensures exceptional reliability and high cleaning performance. The CJ-1E can be operated in both vertical and horizontal positions. The Total Stop feature ensures the device automatically powers off when not in use. Its robust plastic housing and large wheels provide excellent durability and optimal mobility.

Kondisi: bekas, System: Used decanter / centrifuge Manufacturer: Flottweg Model: Solid Bowl Scroll Centrifuge Type: Z73-4/454 Mach. No.: 010.014.04 Year of manufacture: 1999 Bowl: max. rotational speed 2800 rpm Permissible sediment density: 1.3 kg/dm³ Lsdsppa Tcjpfx Am Esah

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.600 kg, tinggi total: 2.780 mm, lebar total: 2.265 mm, panjang total: 2.110 mm, gores kuas bulu: 450 mm, panjang benda kerja (maks.): 1.220 mm, lebar benda kerja (maks.): 870 mm, tinggi benda kerja (maks.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel axes (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amperes Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and minimized electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Including 6-station LTC electrode changer Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled, and thoroughly tested prior to sale to ensure top quality and reliability. We are happy to offer additional services as well: - Transport Laedpjx Sv E Hjfx Am Eeh - Commissioning - Training - Accessories such as clamping devices