Unit built-in bertekanan tinggi 160-210bar 36-55l
PTC Whale

tahun pembuatan

2023

Kondisi

mesin pameran

Lokasi

Rheda-Wiedenbrück Jerman

Unit built-in bertekanan tinggi 160-210bar 36-55l PTC Whale

Tampilkan peta

Data mesin

Nama mesin:: Unit built-in bertekanan tinggi 160-210bar 36-55l

Pabrikan:: PTC

Model:: Whale

Tahun pembuatan:: 2023

Kondisi:: seperti baru (mesin pameran)

Jam operasional:: 1 h

Harga & Lokasi

Lokasi:: Kupferstr. 11, 33378 Rheda-Wiedenbrück, Deutschland

Hubungi

Rincian penawaran

ID iklan:: A3582447

Nomor referensi:: 1001

Pembaruan:: terakhir pada 29.05.2024

Deskripsi

High-pressure cleaning unit, high-pressure flushing device, high-pressure built-in washer mounted on a hot-dip galvanized and painted high-grade steel frame with forklift pockets, suitable for installation in commercial vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc.

Available models:
Whale 36/210 | 36 l/min at 210 bar | Engine: Honda GX630 14.7 kW
Whale 43/180 | 43 l/min at 180 bar | Engine: Honda GX630 14.7 kW
Whale 55/160 | 55 l/min at 160 bar | Engine: Honda GX690 17.7 kW

DIMENSIONS / WEIGHT:
Dimensions without water tank (LxWxH): approx. 650x1,000x1,030 mm
Unladen weight without water tank: approx. 250 kg
Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg
Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and approx. 300 kg

HIGH-PRESSURE PUMP:
- Manufacturer: COMET
- Model: TW 13022S Premium

ENGINE:
- Manufacturer: Honda
- Model: GX 690
- Fuel: Petrol
- Cooling: Air
- Cylinders: 2
- Displacement: 688 cm³
- Max. Power: 24 HP (17.7 kW)
- Max. Engine speed: 3,600 rpm

TRANSMISSION: Gear housing

CONTROL PANEL:
- Ignition key
- Hour meter
- Electronic fuel gauge
- LED low oil pressure indicator
- Emergency stop button

INSTALLED ALARM:
- Water shortage protection for dry-run prevention of the high-pressure pump, with automatic shut-off function

SAFETY AND PRESSURE REGULATION VALVES:
- The unit is equipped with a safety valve, a pressure regulating valve and a manometer.

HIGH-PRESSURE HOSE REEL:
- Type: Manual hose reel
- Material: Stainless steel
- Capacity: max. 60 m ½" high-pressure hose
- Hose: 50 m ½" high-pressure hose (included)

LOW-PRESSURE WATER SUPPLY HOSE REEL:
- Type: Manual hose reel
- Material: Stainless steel
- Capacity: max. 35 m ¾" low-pressure hose
- Hose: 35 m ¾" low-pressure hose (included)

FUEL TANK:
- Capacity: approx. 13 l

WATER FILTER:
- With washable cartridge and drain valve
- Filtration grade: 50 mesh

Nwsdpodqmttefx Agysp
SCOPE OF DELIVERY:
- Multifunctional IMET radio remote control:
- Engine On / Off
- Bypass On / Off
- Electronic speed control +/-
- Emergency stop button
- Battery charger for remote control
- 300, 400 or 500 l polyethylene water tank

OPTIONS ON REQUEST:
- 60 m ½" high-pressure hose
- Pulsation/booster pump
- Secondary high-pressure hose reel
- Electric high-pressure hose reel (connection to vehicle battery required)

ACCESSORIES ON REQUEST:
- STORZ kit for connection to hydrants
- UNI 45 kit
- Mobile hot water generator 10 kW – 12 VDC
- High-pressure spray gun kit, swivel joint, and quick coupling
- High-pressure lance kit with fan jet nozzle 15° / rotary nozzle
- Lance kit for high flow
- Rotary nozzle kit
- Double head nozzle kit
- Water sandblasting lance kit
- Detergent dispenser kit
- Step cleaning device
- Surface cleaner
- Mud suction device (Venturi)
- Pipe cleaning nozzles
- Additional accessories on request

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Penyedia

Terdaftar sejak: 2017

63 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 5242 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

iklan kecil

Unit jet air tekanan tinggi 1000 bar 193 l Hammelmann HDP 362

Rheda-Wiedenbrück

11.155 km

Unit jet air tekanan tinggi 1000 bar 193 l
HammelmannHDP 362

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 2007, jam operasional: 9.953 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.440 mm, panjang total: 7.150 mm, tinggi total: 2.590 mm, tekanan: 1.000 batang, tekanan kerja: 1.000 batang, bahan bakar: diesel, berat keseluruhan: 12.500 kg, kecepatan rotasi (maks.): 1.700 rpm, kapasitas tangki air: 1.600 l, berat kosong: 12.500 kg, daya: 480 kW (652,62 hp), tekanan air: 1.000 batang, kapasitas silinder: 15.874 cm³, kapasitas pompa: 193 l/menit, Perlengkapan: Pelat tipe tersedia, kecepatan rotasi dapat diubah tanpa batas, High-pressure pump unit Hammelmann HDP 362 mounted in a BDF / WAB container. Similar, but not a Kamat, Uraca, or Woma. Pump Model: Hammelmann HDP 362 Njdpfx Agjwz Ekqoyewp PRESSURE STAGE 1: Operating pressure: 1000 bar Flow rate: 193 l/min Switching valve for 4 consumers/outlets, each with separately adjustable pressure installed. Drive speed: 1700 rpm Plunger diameter: 50 mm Drive power: 360 kW with 480 kW Deutz TCD 2015 V08 4V Stage 3 diesel engine with workshop and changing room. Dimensions (LxWxH): approx. 7150x2440x2590 mm Weight: approx. 12,000 kg Year of construction: 2007 Operating hours: 9953h (machine hours) Condition: The high-pressure pump is in good used condition.

Lihat detail

iklan kecil

Bandsaw - Horizontal BERG & SCHMID GBS 250 Super HA-I Easy

Jerman

11.023 km

Bandsaw - Horizontal
BERG & SCHMIDGBS 250 Super HA-I Easy

Hubungi

Kondisi: baru, Cutting range at 90 degrees: round 255 mm Cutting range at 90 degrees: square 240 mm Cutting range at 90 degrees: rectangular 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Nwsdpefgyh Uofx Agyep Table height 950 mm Band speed 18 - 110 m/min Total power requirement 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-miter metal band saw, frequency inverter hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cutting left 60° / right 45° • Material height sensor (automatic cutting start recognition) • Frame and gearbox made from a single casting, very quiet operation and extremely low vibration • Hydraulic vice, laterally adjustable • Precision-guided, high-quality industrial bearings • Solid vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable hydraulic feed pressure • Infeed support roller • Ball-bearing-mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Lower frame in rapid traverse to material or, for serial cuts, start cutting immediately 4. Switch off saw blade 5. Raise frame to just above material 6. Open vice

Lihat detail

iklan kecil

Pompa sentrifugal Pompa umpan boiler Sulzer Weise 90kW 89m³/h 230m MB 80-230/3

Radeberg

10.785 km

Pompa sentrifugal Pompa umpan boiler
Sulzer Weise 90kW 89m³/h 230mMB 80-230/3

€7.500

harga tetap ditambah PPN

Hubungi

iklan kecil

Minidumper SCHORR RR500DHKB2 PRO 500kg Raupendumper

Schüttorf

11.215 km

Minidumper
SCHORRRR500DHKB2 PRO 500kg Raupendumper

€3.512

harga tetap ditambah PPN

Hubungi

iklan kecil

Pompa pendorong tekanan tinggi Sugino JCP170PS-140 D26

Piskorzów

10.562 km

Pompa pendorong tekanan tinggi
SuginoJCP170PS-140 D26

Hubungi

Kondisi: baru, Tahun pembuatan: 2022, berat keseluruhan: 1.100 kg, panjang total: 1.330 mm, lebar total: 1.090 mm, tinggi total: 780 mm, tekanan: 600 batang, konsumsi air per satuan waktu: 43 l/menit, tekanan air: 600 batang, Perlengkapan: dokumentasi / manual, Sugino high-pressure plunger pump, not Uraca, Hammelmann, or Woma Sugino high-pressure plunger pump Nwsdor A Dm Ijpfx Agyep Type: JPGP-66046 Model: JCP170PS-140 D26 Water pressure: 60 MPa Water pressure: 600 bar Flow rate: 43 L/min Weight: 1100 kg The set includes a set of seals and consumables for the pump.

Lihat detail

iklan kecil

Unit pompa tekanan tinggi 650bar 45l/menit Hammelmann HDP 77

Rheda-Wiedenbrück

11.155 km

Unit pompa tekanan tinggi 650bar 45l/menit
HammelmannHDP 77

Hubungi

Tahun pembuatan: 2005, Kondisi: baik (bekas), nomor mesin/kendaraan: A5.01077.0181, Stationary high-pressure pump unit Hammelmann HDP 77 mounted on base frame. Comparable to but not identical with Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 650 bar Flow rate: 45 l/min Drive speed: 1,500 rpm Drive power: 54 kW Equipped with SIEMENS electric motor, with pressure control valve, with safety valve, with oil cooling system. Dimensions (LxWxH): approx. 1,400 x 720 x 1,160 mm Njdjix I Ndepfx Agyswp Weight: approx. 800 kg Year of manufacture: 2005 Condition: Good used condition.

Lihat detail

iklan kecil

Crane yang terpasang pada truk Palfinger PK 23002 C, Funk

Bovenden

11.050 km

Crane yang terpasang pada truk
PalfingerPK 23002 C, Funk

€23.900

harga tetap ditambah PPN

Hubungi

iklan kecil

Sistem meja las 3 D tanpa penyesuaian ketinggian KK Kletzer Schweißtisch SST 80/16 L Ø28 Fix 2980x1480

Austria

10.686 km

Sistem meja las 3 D tanpa penyesuaian ketinggian
KK KletzerSchweißtisch SST 80/16 L Ø28 Fix 2980x1480

Hubungi

Kondisi: baru, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 mm Njdpfx Agjfk Ailjyjwp Table width: 1480 mm Table length: 2980 mm Approx. weight: 630 kg Special worktable systems of the SST, SFT, and SWT fix series as 3D clamping workstations for efficient production of assembly, welding, and adhesive constructions, e.g., fixtures, railings, frames, etc. With the extensive range of clamping accessories (see catalog section Weld Table Accessories), these table systems can also be configured as flexible fixtures, allowing for high-quality production of small and medium batch sizes. The special worktables feature a 16 mm (dual Standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid pattern. In addition, the tabletop has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows the use of a variety of clamping elements and positioning aids. For special use cases, the table surface can optionally be equipped (deviating from standard) in stainless steel 1.4301, aluminum, plastic, or also in high-strength materials such as ST70. Thanks to the fully bolted design of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. This ensures the table system remains particularly sustainable in use. Price to be reconfirmed with the manufacturer before ordering!!

Lihat detail

iklan kecil

Bandsaw - Horizontal BERG & SCHMID DGS 350/450 HA-I Easy 34

Jerman

11.023 km

Bandsaw - Horizontal
BERG & SCHMIDDGS 350/450 HA-I Easy 34

Hubungi

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic Nwedsfgyicopfx Agyep · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Lihat detail

iklan kecil

Bandsaw - Horizontal BERG & SCHMID GBS 305 AutoCut

Jerman

11.023 km

Bandsaw - Horizontal
BERG & SCHMIDGBS 305 AutoCut

Hubungi

Kondisi: baru, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions 3375 x 27 x 0.9 mm Band speed 37 + 74 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° left and 45° right Nsdpfx Agsfd Abasyjwp - Ball-bearing rotary table - Side-shiftable vice - Heavy-duty, large material support - Automatic cooling system Image shows semi-automatic version.

Lihat detail

Beriklan di sini