Raimann KR 310 E 340/120 multi-bilah

Raimann KR 310 E

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Cgedpfxow Sy T Hs Aa Tep Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Cgsdpod H Sc Eofx Aa Top Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain after the finger jointing press, foldable - Drying paternoster, approx. 7 m, for board lengths up to 6 m - Separation and zero saw - Conveyor belt for residual wood disposal Cgodjwclkyopfx Aa Top - Stacking unit - Strip magazine not included in the sale - Package cross conveyor The machine is in very good condition, very little used The machine is still installed but available immediately

Kondisi: sangat baik (bekas), Technical data: Max. planing width: 400 mm Max. planing height: 240 mm Cutter shaft diameter: 120 mm Cgjdpfxov Rv Dbe Aa Tsp Number of knives: 4 Feed speed: 6–12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Kondisi: baik (bekas), Tahun pembuatan: 1990, RANDEK SP700 Crosscut Saw Manufacturer: Randek, Sweden Year of Manufacture: 1990 In good condition Codpfxjh Ayyqj Aa Tegp The SP700 series from Randek is a reliable saw designed for roof truss and house manufacturers worldwide. The SP700 saw is efficient, easy to operate, and precise. It has long been established on the market and is continuously improved in close collaboration with numerous customers. The blade of this semi-automatic saw supports mitre cuts, meaning it can perform all the cuts you require. The large saw blade diameter (700 mm) also allows you to cut multiple sections of stacked timber simultaneously. - Mitre cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cycle - PLC-programmable saw - Wood fixation close to the cutting area for precise results Roller conveyor system with 5 adjustable pneumatic stops. Length 6.25 m Discharge roller conveyor 4.10 m Complete line: 11.5 m Technical information subject to change.

Kondisi: baru, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! Cgjdpfxsf Sqcko Aa Tjp Straightening Press 150 tons with electric motor and additional manual hand operation via lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a custom press according to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode using a lever to raise and lower it. For precision tasks (e.g., pressing bearings, straightening, etc.), the press also features a manual hand pump, allowing you to finely adjust the force manually. The pressure cylinder is mounted on a sliding carriage, which allows it to be laterally shifted. This enables you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Pull chains for easy height adjustment - Heavy-duty machine frame - Laterally adjustable cylinder (mounted on sliding carriage) The press can be tested under power at our location. ----- Numerous other workshop presses available in various designs, sizes, and with optional additional equipment! 30, 60, 100, 150, 180, 200 tons. ----- Simply contact us for a non-binding consultation. The stated price is net, plus 19% VAT. All information provided without guarantee. Europe-wide delivery possible! ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place through telecommunications (email, fax, phone, messaging portal). We will first provide you with a non-binding offer, which will include our general terms and conditions and cancellation policy with company information, prior to purchase or conclusion of contract.

Kondisi: baru, Tahun pembuatan: 2024, Hacker knives 40 x 40 concave Knives for Weima, Gross ... Cgjdpfx Aasbxu Dho Tjp Suitable for almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Kondisi: baik (bekas), Tahun pembuatan: 1996, Four-sided planer Weinig Unimat 23 – German made – Ribbed cast iron table – Year of manufacture: 1996 – Feed rollers integrated in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Ribbed table Spindle diameter: 40 mm 1st (bottom) spindle: 7.5 kW 2nd (right) spindle: 7.5 kW 3rd (left) spindle: 7.5 kW 4th (top) spindle: 11 kW 5th (bottom) spindle: 7.5 kW Feed speed, steplessly adjustable: 6–36 m/min Feed motor power: 5.5 kW Six steel top feed rollers Two rubber top feed rollers Three in-table feed rollers Pneumatic feed pressure Cgsdpfx Aeh Dwl Dsa Tjp Pneumatic shoe pressure Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Central (divided) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Tahun pembuatan: 2001, jam operasional: 123 h, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 123, Chip silo diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Cgodpjftdv Uefx Aa Tsp Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.

Kondisi: bekas, Tahun pembuatan: 2002, jam operasional: 3.900 h, FOR SALE: EDGE GRINDING MACHINE IN VERY GOOD CONDITION, USED SINCE NEW IN A SMALL GLASSWORKS. AVAILABLE FOR VIEWING IN WROCŁAW. Cgjdpfx Aswb U Rgea Top