Mesin broaching

Rausch RS 3/1000

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 758, Overhauled Towing capacity: 2 t Lift: 1000 mm Kedobrcmhjpfx Aahsnf

Kondisi: bekas, TECHNICAL DATA - Table size: 700 x 480 [mm] - Dielectric capacity: 600 [l] TRAVELS - Travel X/Y/Z axes: 350 x 250 x 250 [mm] - Travel U/V axes: +/- 90 [mm] - Maximum taper: [°/mm] WORKPIECE - Max. workpiece dimensions: 900 x 680 x 250 [mm] - Max. workpiece weight: 400 [kg] - Surface finish quality: 0.125 [μm] Kjdpfx Asuhq Rloahjnf WIRE GUIDANCE - Wire diameter: 0.15 - 0.30 [mm] - Spool weight: 5 - 8 [kg] - Speed: 30 - 270 [mm/sec] ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total power consumption: 11 [kVA] WEIGHT AND DIMENSIONS - Required space: 2500 x 2500 [mm] - Machine height: 2200 [mm] - Machine weight: 2890 [kg] MACHINE HOURS - Operating hours: 1266 [h] ACCESSORIES - Control: Charmilles Pentium III CPU - Remote control - Coolant tank

Kondisi: baru, Tahun pembuatan: 2023, Two tables are connected via tandem control for a combined load capacity of 5,000 kg. Technical Description with Key Data: Load capacity: 3,000 kg static distributed load Useful stroke: 800 mm Installation height: 240 mm Total height: 1,040 mm Platform length: 1,300 mm Platform width: 1,000 mm Material: Smooth sheet metal Lifting time: approx. 18 sec. for full stroke Lowering time: load-dependent Electrical connection: 3 x 400 V / 50 Hz + protective earth, with 16 A CEE plug and 3 metre cable Motor: 2.2 kW, 1,400 rpm Valve voltage: 24 V DC Protection class: IP 54 overall, solenoid valve and switches IP 65 Paint finish: Steel blue RAL 5011 Power unit position: integrated in the lifting table Control box: dead man's control with 2 m cable Total weight: approx. 330 kg Tandem control for simultaneous operation. Note: 100% synchronized operation cannot be guaranteed. Any height differences that occur are compensated in the base and upper positions! The safety edge strips of both lift tables are NOT interconnected. Minimum distance between the lifting tables: 500 mm. Maximum distance: 3,000 mm. Self-supporting base frame with 4 flanged wheels in which the lift table is mounted. 4 ball-bearing mounted flanged wheels, wheel Ø150/175, heavy-duty version, machined from C45 steel. Installation height + approx. 50 mm. Kedpfx Aajk E Hmtehjnf

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Hainbuch centroteX Quick Change System (Year of manufacture: 2019) • 2x centroteX M Machine Adapters (A037017.0382B): o Short taper size: KK8 o Drawtube connection: M85x2 o Length: 53mm o Through-hole: 78mm • 1x TOPlus mini Axfix Size 65 (A038531.0015C) o ID No.: 10000678 o Length: 136mm • 1x TOPlus mini Axzug Size 65 (A038530.008C) o ID No.: 10000676 o Length: 134.5mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179mm o Diameter: 210mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155mm o Diameter: 257mm • 1x monteq quick-change system (A012708.0009B) • 1x Roll-container D400 o Storage for the 4 mentioned clamping devices o monteq quick-change system + Tiger crane hook mounted laterally • Manuals/documentation • 1x toolbox with accessories Accessories • Clamping head TOP65 (for rough/raw material) o 1 pc. each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • Clamping head TOP65 (hexagon) o 1 pc. each: SW36, 45, 46, 50 • Clamping head TOP65G (smooth) Knjdpfx Aajv Ivakohef o 1 pc. each: d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs.: d38 • 1x releasing ring for clamping head 65 • Total of 50 clamping heads • Accessories jaws o for HWR 4-jaw chuck  1 set of reversible jaws  3 sets of serrated jaws o for Forkardt 3-jaw chuck  1 set of hard reversible jaws o Various T-nuts + screws o Various distance bolts for jaws (to adjust clamping length for the material) • Various soft jaws (2 pallets)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm Ksdpfx Aajvrckqohjnf >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Kondisi: baru, Sheet bending: 6.0 Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Approx. weight: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » with 3x upper roll diameter Initial pre-bending: 6.0 mm » with 1.5x upper roll diameter Upper roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of upper and lower rolls via planetary gear • Digital display for side roll positions • Hydraulic drop-end bearing • Conical bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Operating instructions in GERMAN and ENGLISH • Machine and equipment according to CE regulations Knjdsd Ab H Hopfx Aahsf Catalogue: see the following link: Important notes for conical bending: • The max. sheet thickness is 50% of the nominal capability • The cone length may be max. 30% or must be more than 60% of the roll length • Hardened rolls are recommended

Tahun pembuatan: 1993, Kondisi: baik (bekas), nomor mesin/kendaraan: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine no.: 03.2370 Knedocc D Ddspfx Aahef General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Pull head mount diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Additionally, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of shaft and end-piece holders is hydraulic. The machine features a coolant system with integrated magnetic chip conveyor, designed for use without a special foundation (pit). Remarks: This machine is designed for use in high-volume production. The machine is in very good condition and still has its original paint. The machine can be inspected under power at our warehouse.

Kondisi: bekas, tinggi total: 2.450 mm, panjang total: 4.000 mm, lebar total: 2.000 mm, de-hu Knedpfx Aaowr Drhshef

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Tool grinding machine Jungner Sweden Year of manufacture: 1995 Knsdpfx Ajwdihreahef Accessories

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Ksdpsu A Dn Njfx Aahjnf