Beli Rausch Rs 3/1000 bekas (73.498)

Kondisi: sangat baik (bekas), Gaya tarik – maks. 3 ton Langkah tuas – maks. 1000 mm Diameter benda kerja – maks. 500 mm Luas permukaan penjepit meja 500 x 400 mm Psdpfszu Tn Ijx Aigsgr Panjang alat – maks. 1200 mm Total kebutuhan daya 1,5 kW Berat mesin sekitar 0,4 ton Ruang yang dibutuhkan sekitar 1,0 x 0,8 x 1,5 m

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 758, Overhauled Towing capacity: 2 t Pjdsbrcmhopfx Aigsgr Lift: 1000 mm

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Pedpfx Asw H Dgnoigjgr Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Kondisi: bekas, Tahun pembuatan: 1972, Zugkraft - max. 6 t Stößelhub - max. 1000 mm Werkstückdurchmesser - max. 350 mm Tischgröße 610 x 470 mm Arbeitsbereich 520 x 320 mm Arbeitsgeschwindigkeit 3 + 5 m/min Rücklaufgeschwindigkeit 10 m/min Werkzeuglänge - max. 1200 mm Pjdpfsyif Nlex Aigjgr Tischbohrung 90 mm Gesamtleistungsbedarf 8,2 kW Maschinengewicht ca. 1 t Raumbedarf ca. 1 x 1 x 1,8 m Maschine kommt mit Zubehör, wie Halter und Räumnadeln.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1987, nomor mesin/kendaraan: 60213/674, tegangan masuk: 380 V, arus masuk: 15 A, frekuensi input: 50 Hz, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, -WAG 893- Dijual mesin pembersih interior Rausch RS6/1000. Produsen: Rausch Tipe: RS6/1000 Tahun Pembuatan: 10/1987 Nomor Mesin: 60213/674 Berat: sekitar 800 kg Gaya Tarik: 60 kN Pedpszvwlysfx Aigsgr Informasi lebih lanjut akan segera ditambahkan...

Kondisi: siap digunakan (bekas), Vertical Broaching Machine Rausch Model: RSIZ 6 / 1000 S Condition: Used Technical data: Working range: up to 1000 mm Cutting speed: 3 to 5 m/min Pgsdpfjdyp Rmox Aigor Return speed: 10 m/min Internal broaching: maximum workpiece diameter 600 mm External broaching: clamping plate area 600 x 340 mm Coolant system Tensile force gauge Automatic central lubrication Spindle protection via spring band spirals Chip conveyor Cut-off counter Dimensions: 1.05 m x 0.9 m x 4.3 m Weight: 1200 kg Self-collection or shipping via freight forwarder. We are happy to assist you in organizing cost-effective shipping. You are welcome to arrange a viewing appointment. You will receive a proper invoice. For foreign customers, a net invoice can be issued, provided a valid VAT identification number is available. Prior sale reserved. Company names and trademarks mentioned are the property of their respective owners and are used for identification and descriptive purposes only. The machines and tools are sold in their current condition. Assembly and electrical connection of the machine/equipment must be carried out and/or inspected by properly trained personnel. Deviations from technical data and mistakes in the description may occur and are reserved.

Tahun pembuatan: 1978, Kondisi: baik (bekas), nomor mesin/kendaraan: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Model: RS8/1300 Year of manufacture: 1978 Pulling force: 8 tons Pgodpfx Asfc T E Ajigor Stroke: 1,300 mm Weight: 0.92 tons

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 662681751, Manufacturer: Rausch Type: RS6 / 1300 Machine No.: 662681751 Year of manufacture: 1992 Power supply: 3-phase ~ 380 Volt / 50 Hz Connected load: 7.1 kW Rated current: 17 Amps Weight: 810 kg Wiring diagram number: RS6 – 39 With unit Pjdpfx Aijfc T Edjgogr Table dimensions: 520mm x 320mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 60305, en-001 Pgodpoiqkb Rjfx Aigor

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 400 kg, tegangan masuk: 400 V, panjang broaching: 1.000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of manufacture: 1995 Weight: 400 kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, overhauled, mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / working surface: 430 mm x 320 mm / 340 mm x 220 mm Pedpfjw Huh Nox Aigegr Table opening: Ø 90 mm for standard broaching tools “Rausch system” Workpiece diameter: arbitrary (removable coolant swivel system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shanks) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (height incl. 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Electrical supply: 400 Volt / 50 Hz Equipment: - Gearmotor drive with 2 working speeds - Safety door with safety monitoring (emergency stop circuit) - Easily removable chip chute with storage for tools - Externally adjustable tool length setting system (Rausch system) - Protective cover for stroke adjustment and electrical switch units - Electrical detection of clamping jaws (prevents unintentional return of the pull bridge, providing additional safety for operator and tool) - Integrated coolant unit - Coolant swivel system (without electrical switching function) - Three-sided splash guard hood with wide, front-opened working area - Extra reinforced chip basket and chip sieve with magnetic insert - Stainless steel operator panel with permanent marking - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - New machine documentation - “CE” marking from manufacturer (1995) Remarks: The machine has been overhauled, with the machine body completely refurbished. The following wear parts have been replaced/renewed: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced - Coolant system incl. coolant/lubricant swivel system replaced - New dual-speed SEW gearmotor - New electrics (Siemens) - New safety door instead of light barrier - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve, and spindle guard, are new - Stainless steel operator panel with permanent marking - Machine repainted with 2-component structural paint The machine carries the manufacturer’s CE marking. General: The double-spindle drive ensures smooth operation with a central pulling point and consistent broaching speed. The machine is primarily designed for producing keyway slots up to 18 mm (from 16 mm slot width only with stepped tool shanks). Due to its design, the machine enables quick and easy setup for broaching with flat broaching tools for keyways. The universally constructed pull bridge and machine table make it possible to use both profile and flat broaching tools without additional pull heads.

Kondisi: baik (bekas), Distance between centers: 1000 mm Center height: 230 mm Main motor power: 9.2 kW Grinding wheel dimensions (od x id x width): 500x80x203.2 mm Max. workpiece diameter: 460 mm Tailstock taper: MORSE 4 Workhead spindle taper: MORSE 5 Max. Z axis travel: 1115 mm Max. X axis travel: 260 mm Pjdpetrgnzsfx Aigjgr Approx. dimensions (length x width): 440x370 cm Approx. weight: 4700 kg

Kondisi: siap digunakan (bekas), de2en10 Pgjdpjza U Alofx Aigor

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 370 kg, daya: 3,5 kW (4,76 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, panjang broaching: 800 mm, kecepatan broaching: 3 m/menit, panjang total: 920 mm, lebar total: 800 mm, tinggi total: 1.950 mm, Hersteller: Rausch (Haan/ Rhld) Modell: RS 3 G/ 800 Maschinen-Nr.: 2968/424 Baujahr: 1970 Gewicht: 370kg Überholung: 8/2025 durch Fa. Wiemers AG Unsere Ref. / Maschinen-Nr.: WAG 787 Allgemeine Informationen / Technische Daten: Ungenutzte, generalüberholte mechanische Vertikal-Räummaschine von Rausch Zugkraft: 3.000kg (30kN) Räummgeschwindigkeit: 3m/min und 6m/min Rücklaufgeschwindigkeit: 3m/min Maximaler Hub: 800mm Maximale Werkzeuglänge: 1.000mm Tischgröße / Arbeitsfläche: 340mm x 220mm / 430mm x 310mm Tischdurchlass: Ø 90mm für Standard-Räumdorne Werkstückdurchmesser: beliebig (ohne Spritzschutzkabine) Abmessungen (H x B x T): 1.950mm x 820mm x 900mm (Höhe = Tischhöhe zum Boden ohne Aufbauten) Motor: 3,5 kW Stromversorgung: 400 Volt / 50 Hz Zubehör / Sonderausstattung: - Modifiziertes Antriebssystem mit Getriebemotor und Zahnriemenantrieb - 2 Räummgeschwindigkeiten: 3m/min & 6m/min - Extern verstellbarer Hub, werkübergreifendes reproduzierbares Werkzeuglängen-Einstellsystem - Integrierte Kühlmittelanlage mit Rückschlagventil und Ablasshahn sowie Wahlschalter für Automatikbetrieb (keine automatische Schaltung im Schwenkbetrieb) - Patentiertes Kühl-/Schmiermittel-Schwenksystem - Dreiseitig geschlossene, nach vorne offene Spritzschutzkabine (ohne externes Bedienpult) - Maschinenverkleidung unterhalb der Schutztür mit Späneschutz und Abstellplatz für Werkzeuge - Elektrische Leitungsführung in Stahl-Schutzrohren - Elektrische Spannbackenabtastung (Werkzeugentnahmekontrolle, verhindert unbeabsichtigtes Zurückfahren der Zugbrücke) - Schutztür mit integrierter Not-Aus-Funktion - Bedienpanel aus Edelstahlblech mit dauerhafter Kennzeichnung - 4 zentrale Schmierpunkte für den Trapezspindelantrieb - Maschinendokumentation Hinweis: Die Maschine wurde komplett überholt und das Maschinengehäuse vollständig aufgearbeitet. Folgende Verschleißteile wurden ersetzt: Pgodpfsytvyxex Aigsr - Neue Trapezspindeln und Spindelmuttern aus verschleißfester Bronze - Sämtliche Lager und Dichtungen erneuert - Zentraler Antriebswelle ersetzt - Komplettes Kühlmittelsystem (Pumpe, Rückschlagventil, Ablasshahn) inkl. Schmiermittel-Schwenksystem erneuert - Neue Spannbacken (Zugbrücke zusätzlich verstärkt) - Spannbackenabfrage mit Abschaltfunktion verbaut (zusätzliche Sicherheit für Bedienpersonal und zum Schutz vor Werkzeugbruch) - Schutztür mit Sicherheits-Abfrage ersetzt alten Gummischutz - Werkzeuglängen-Einstellsystem außerhalb des Maschinenraums verlegt - Zusätzliche Endschalter für Endlagen verbaut - Komplette neue Elektrik (Schaltschrank) mit Siemens-Komponenten - Edelstahl-Bedienpanel mit dauerhafter Kennzeichnung - Neuer Getriebeantriebsmotor (SEW) mit Zahnriemenantrieb - Maschine mit 2-Komponenten-Strukturlack neu lackiert Die Maschine befindet sich in unserem Lager und kann unter Strom besichtigt werden.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.000 kg, Perlengkapan: dokumentasi / manual, Mengangkat, memutar 360°, memutar 360° juga untuk posisi di atas kepala. Manipulator Severt L, 4 unit, kapasitas angkat 1000 Kg dan 2000 Kg, harga per unit. TIPE PRODUK S10 KODE TIPE S10.1-1HH 1000kg / 2000 Kg KAPASITAS ANGKAT (KG) 1000 / 2000 Kg LANGKAH (MM) 1000 PANJANG LENGAN ANGKAT (MM) 1500 / 2000 Momen puntir PLAT PENERANG (NM) 1400 MOMEN TEGANGAN LENGAN ANGKAT (NM) 3000 PENGATUR FREKUENSI ya Pgjdezk Rdxspfx Aigsr PENGGERAK LANGKAH hidrolik BERAT SENDIRI (KG) 1700 Semua mesin dilengkapi dengan dokumentasi dan instruksi pengoperasian. Harga per unit.

Kondisi: sangat baik (bekas), RS Simulators Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until decommissioning. Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Configuration: Temperature Shock Chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component and reliability tests. For industrial, automotive, research, and quality assurance applications. System Description - 2 separate temperature chambers (hot / cold) - Automatic horizontal specimen basket transfer - Fast switching operation for thermal shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Interior (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current consumption: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions: External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight: approx. 2800 kg Equipment: - Horizontal basket movement - C-rails in test chamber - Large specimen basket (>1000 mm) - Observation window - Interior lighting - SE-604 control unit - Program mode and data logging - RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data: Operating hours: approx. 4,500 h Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% r.h. Scope of Delivery: - RS Simulators Temperature Shock Chamber ST2K 1000 / 55 - Scope of delivery as shown Function test Pgjdpfx Aoy H Igfjigjr Refrigerant service Leak test Condition: Used. Condition as shown in pictures. Viewing by appointment possible. Loading and transport can be arranged upon request. Subject to prior sale and technical changes. If you have any questions, please feel free to contact us.

Kondisi: siap digunakan (bekas), Servomotor Parvex LC310THR0004 SN: 8340 dengan encoder Heidenhain ROD 426 1000 02S12-03 ID: 376 846-79 SN: 16078305, bekas, kondisi terawat baik, 100% berfungsi, cakupan pengiriman sesuai foto. Pedpfx Aisxtwa Ejgsgr

Kondisi: siap digunakan (bekas), Bosch SE-B2.040.060-00.003 Brushless Servo Motor with Heidenhain ROD 426.014 1000 . 222 651 23 ROD Encoder, mounting hole spacing: 81 x 81 mm, drive shaft diameter: 14 mm, used, in good condition, fully functional. Podpoi D Hd Dsfx Aigjgr

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.000 kg, Meja las putar 3 sumbu dengan penyesuaian ketinggian hidrolik, kapasitas beban 1000 kg, kontrol jarak jauh Diameter piring penjepit 900 mm, kondisi prima Kecepatan, ketinggian, dan kemiringan dapat diatur secara stepless Tinggi minimum dengan plat vertikal: 635 mm Tinggi minimum dengan plat horizontal: 800 mm Tinggi maksimum dengan plat vertikal: 1360 mm Tinggi maksimum dengan plat horizontal: 1500 mm Pedpsylihysfx Aigjgr

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.000 kg, 1000 kg load capacity complete set incl. hand and dual foot remote control 3-axis welding positioner, height adjustable with 200mm through-hole Table diameter 900mm with T-slots; alternatively with mounted solid perforated plate 2000 x 1000 x 200mm, thickness 20mm, hole grid 100mm, diameter 28mm Pedpfx Aijvllhrogsgr Horizontal height min. 0.65m, max. 1.25m Tilted height min. 0.45m, max. 0.95m Speed from 0.01 - 1.1 rpm Tilting up to 135° Hand and dual foot remote control with speed display Very robust Price is without accessories; accessories available at very favorable surcharge Table plate surcharge €1,900 (only in combination with positioner)

Kondisi: baru, Tahun pembuatan: 2024, 1000 kg load capacity complete set incl. hand and dual foot remote control Height-adjustable welding positioner Pgedpfxor Tr A Uo Aigsr with 200 mm through-hole Table diameter 900 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed range from 0.01 - 1.1 rpm Tilting angle up to 135° Hand and dual foot remote control with speed display Very robust construction Chuck available at extra cost, depending on version and size.

Kondisi: baru, Meja lubang 3D 2000 x 1000 x 200 mm, grid 100 mm, ketebalan pelat 22 mm, diameter lubang 28 mm. Pgedpfxsvlli Aj Aiger Permukaan diproses rata, sangat kokoh, berat sekitar 750 kg. Dengan kaki meja cocok untuk semua aksesori standar dengan diameter 28 mm. Harga tanpa aksesori; tambahan biaya €500 untuk set setengah dari jumlah yang tertera pada gambar.

Kondisi: baru, kapasitas angkut: 1.000 kg, Perlengkapan: kendali jauh kaki, Kapasitas angkat 1000 kg. Set lengkap termasuk remote kontrol tangan dan kaki ganda (tersedia mulai 600 kg hingga 10.000 kg). Meja putar pengelasan 3 sumbu, dapat diatur ketinggiannya, dengan lubang tembus 200 mm. Diameter pelat 900 mm dengan alur-T, atau sebagai alternatif dengan pelat berlubang tebal berukuran 2000 x 1000 x 200 mm, ketebalan 20 mm, pola lubang 100 mm, diameter 28 mm. Tinggi horizontal min. 0,65 m, maks. 1,25 m. Tinggi posisi miring min. 0,45 m, maks. 0,95 m. Kecepatan antara 0,01 - 1,1 rpm. Kemiringan hingga 135°. Kontrol tangan dan kaki ganda dengan tampilan kecepatan. Sangat kokoh. Harga tanpa aksesoris, aksesoris tersedia dengan biaya tambahan terjangkau. Biaya tambahan pelat meja €1900 (hanya bersama dengan posisi penempatan). Pgodpfx Aisx Th A Hjgjr

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1083, Broaching machine - Vertical Manufacturer: Rausch Model: RS10/915 Machine number: 1083 Year of manufacture: 1962 Pulling force: 10 tons Stroke: 915 mm System: DIN 1415 Pgedpfxsfc T Euo Aigjr With platform for above-floor installation

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 20236, Tractive force: 10 t Lift: 1500 mm 1 broaching station Podpfx Aiebrcmrsgogr Weight: approx. 1800 kg Power: 9.5 kW/380V With feeder and mechanical chip conveyor

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1968, nomor mesin/kendaraan: 51039/373, Vertical Internal Broaching Machine Rausch RS 6G (WAG 855) Manufacturer: Rausch (Haan/Rhld) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Overhaul: 12/2024 by Wiemers AG General / Technical Data: Completely overhauled mechanical vertical broaching machine Rausch RS 6G, unused, with “CE” marking Pulling force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Pgodpfxsv Rmvzs Aiger Table size / work area: 610x470 mm / 520x320 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unrestricted Dimensions (H x W x D): 1600 mm x 850 mm x 1000 mm (H = table height to floor without superstructures) Motor power: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced pull bridge made of tool steel for higher pulling forces - Safety door with automatic locking and safety interlock - New chip chute with tool parking facility - Protective covering for stroke adjustment - Oil-tight shelf on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the pull bridge; extra safety for operator & tool) - Integrated coolant system with electrically actuated solenoid valve and drain tap - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length setting system (reproducible across machines) - Stainless steel control panel with durable labeling - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Remarks: The machine is completely overhauled. During the overhaul, the machine base, machine body, and table have been completely refurbished. All wear parts have been replaced. The machine is upgraded to the state-of-the-art and complies with current “CE” regulations. It is supplied with a “CE” certificate. General: The double spindle drive provides smooth operation and a central pull point as well as a constant broaching speed (selectable broaching speed: 3 m/min or 6 m/min). The design enables quick and easy setup for keyway broaching using flat broaching tools. Thanks to the universally designed pull bridge and machine table, profile and flat broaching tools can be used without the need for additional broach holders. Matching broaching tools and mandrels for this machine are available on request.