Pabrik pencacahan

Recuperma RECU UZ 2000

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, de_DW3060_listing Ksdpfx Afexrtt Eeijlr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.500 h, Fungsionalitas: berfungsi sepenuhnya, gaya potong: 630 t, daya: 90 kW (122,37 hp), berat kosong: 36.500 kg, lebar total: 2.400 mm, panjang total: 9.500 mm, berat keseluruhan: 40.000 kg, panjang pemotongan (maks.): 1.600 mm, tahun perombakan terakhir: 2024, jenis arus masuk: tiga fasa, tekanan kerja: 220 batang, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. A 250 kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12-17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is designed for efficient metal scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap material is loaded into the feed area with the help of an excavator. Thanks to the horizontal loading area and the weight of the scrap itself, the material drops down into the charging chamber and the cutting zone. The scrap is compressed against the front wall and sheared by a horizontally moving tool-holder side as it presses the material through the knives on the end wall. As the tool carriage moves horizontally, the processed material is pushed through the knives at the container’s front wall. On the return stroke, scrap advances into the shear interior under its own weight. Kjdpouu Upgjfx Afislr Scrap shears are available in various configurations according to customer requirements, and the output size can be selected for new orders. Inspection and test operation are possible.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Hard rock crushing and screening plant – essentially consisting of: Klsdpfeufih Djx Afier Feed hopper SVEDALA H-36 cone crusher Dosing hopper SANDVIK H-200 cone crusher unit, with pre-screen Dosing hopper with discharge conveyor 2 x double-deck screening plants approx. 1,700 x 3,000 mm and approx. 1,200 x 3,500 mm various conveying and stockpile belts complete electrical installation with switch cabinet in container

Kondisi: bekas, PENGHANCUR POROS WEIMA POROS TUNGGAL MODEL WLK15 MOTOR UTAMA 90KW Kjdstqd Ndjpfx Afiolr UKURAN PISAU ROTOR 50X50 (PISAU BARU) PANJANG ROTOR 1500MM DIAMETER ROTOR 370MM MESIN 100% BERFUNGSI SIAP DIGUNAKAN

Tahun pembuatan: 1963, Kondisi: siap digunakan (bekas), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Kedsh I Edvjpfx Afislr

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Klsdpfjvf E Avsx Afior Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Clamping force: 500 t Screw diameter: 80 mm Kedpfxova H Amj Afislr Shot weight: 1620 g Tie bar spacing (vertical): 900 mm Tie bar spacing (horizontal): 900 mm Shot volume: 1779 cm³ Injection pressure: 1855 bar Platen dimensions: 1300 x 1200 mm Type: Horizontal Drive: Hydraulic

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GN156, berat kosong: 356 kg, berat muatan maksimum: 944 kg, berat keseluruhan: 1.300 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 2.630 mm, lebar ruang muat: 1.450 mm, tinggi ruang muatan: 400 mm, Perlengkapan: pengunggah,

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Processing plant for (track) ballast 40 cbm feed bunker with push cart Impact crusher OMT 120 kW with feed and discharge chute Double-deck screening unit 1,400 x 4,000 mm with conveyor and stockpile belts complete electrical installation Klodpfx Ajtpamgofior

Kondisi: baru, Tahun pembuatan: 2024, en-001 Kjdpfx Afsq Tpkyjijlr