Lini Otomatis untuk Pengeboran dan Penyisipan

REM (SCM Group) Over 25.13

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, panjang pembubutan: 700 mm, jarak pergerakan sumbu X: 205 mm, jarak gerak sumbu Z: 700 mm, daya motor spindle: 22.000 W, tinggi total: 2.800 mm, panjang total: 6.000 mm, lebar total: 3.900 mm, berat keseluruhan: 9.800 kg, Complete machining with twin spindle, upper and lower turret Kitagawa 3-jaw chuck left and right Tool holders with driven tools, both axial and radial Large jaw cabinet with inserts OGL gantry loader with approx. 10 kg payload Chip conveyor Paper band filter system with pressure tank Max. turning diameter: 400 mm X-axis: 205 mm Z-axis: 700 mm Psdpfxoyn Em Rs Aqvogt Spindle bore: 62 mm Spindle speed: 6000 rpm Spindle power: 22 kW Counter spindle speed: 6000 rpm Counter spindle through-hole: 62 mm Counter spindle power: 15 kW Tool changer: 16 positions Speed of driven tools: 6000 rpm Positions lower turret: 16 Driven tool speed: 6000 rpm Driven tool power: 7 kW Chip conveyor: yes Tool Eye: yes Length: 6000 mm Width: 3900 mm Height: 2800 mm Weight: 9800 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, neither representation nor contract terms are implied. We recommend verifying all important details.

Tahun pembuatan: 2014, Kondisi: perlu perbaikan (bekas), Fungsionalitas: berfungsi sepenuhnya, The machine has been out of use and stationary for several years, therefore it requires maintenance before being put back into service, which will be the responsibility of the buyer. Pgodpfx Aotu U Ebsqvst

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin temper kaca untuk ketebalan dari 3,8 hingga 19 mm. Dimensi maksimum kaca: 2440 x 4500 mm. Psdjx Trg Aspfx Aqvsgt

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Psdpfx Ajgwbbqjqvjgt No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: sangat baik (bekas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm – in strips: max 1 mm Panel thickness (min/max): 14 / 60 mm (LASER – Max 50 mm) Control: ICOS Open Feed speed (adjustable): 6 – 30 m/min Upper pressure: V-belt driven Spraying unit (for liquid non-stick agent) Adjustable fence, CNC controlled Panel infeed system Joint milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR adhesive + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spraying unit (for separation liquid) Pressure zone + edge magazine for rolls (compartments): 36 + 12 Psdpfxsi Hn Srs Aqvjgt End trimming unit 08.428 (0.2 kW x 2), speed up to 30 m/min (0° – 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1), 4 profiles Contour milling unit (for fine trimming), CNC controlled KFA 30 (0.5 kW x 1), max 30 m/min Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing agent) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (4.5 kW x 2), 90°/180°/270° (CNC)

Kondisi: baru, Tahun pembuatan: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Psdpfx Asi Hplkjqvegt Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Kondisi: baru, Typ 400C Abrichthobel: Tischabmessungen: 400 x 1800 mm Messerschutz-Durchmesser: 70 mm Messerkopf-Drehzahl: 5.700 U/min 3 Messer: 400 x 20 x 3 mm Maximale Tischverstellung: 4 mm Dickenhobel: Tischabmessungen: 400 x 760 mm Maximale Spanabnahme: 4 mm Vorschubgeschwindigkeit: 7 m/min Messerkopf-Drehzahl: 5.700 U/min Maximale Arbeitshöhe: 220 mm Minimale Arbeitshöhe: 4 mm Einrichtung zum Stemmen: Tischabmessungen: 250 x 500 mm Längshub: 205 mm Quershub: 95 mm Spannfutter (SX): 16 mm Spannfutter-Drehzahl: 5.700 U/min Motor: 3 kW Pedped Nl Sfsfx Aqvegt Zubehör: Bedienwerkzeuge, Schutzvorrichtungen für das Bohrfutter, Abrichthobel-Anschlag. Gewicht: 390 kg

Tahun pembuatan: 1995, Kondisi: sangat baik (bekas), Lini produksi ini terdiri dari elemen-elemen berikut: 1) Mesin frais Weinig Profimat 23 2) Konveyor sabuk KOCH -T-100-B (250x4550) 3) Mesin frais Weinig Uniplan 4) Konveyor sabuk KOCH T-100-B (250x7050) 5) Mesin pembuat alur KOCH SF -3 5a) Konveyor sabuk bawah untuk limbah (pada mesin pembuat alur, 300x6050) Podpjhm Exdofx Aqvsgt 5b) Konveyor sabuk samping untuk limbah (pada mesin pembuat alur, 300x1800) 6) Konveyor sabuk KOCH T-100-B (250x5020) 7) Konveyor sabuk KOCH T-100-A (300x3050) 8) Konveyor sabuk KOCH T-100-B (300x3500) 9) Konveyor sabuk KOCH T-100-B (300x4530) 10) Mesin frais Weinig U2G 11) Konveyor sabuk KOCH (250x4050) Lini produksi ini hanya beroperasi dalam waktu yang sangat singkat, kondisinya seperti baru. Tahun pembuatan mesin-mesin yang termasuk dalam lini produksi ini adalah 1995. Sebagai tambahan, untuk setiap mesin, saya sertakan satu set pahat frais dari perusahaan Leitz, untuk profil jendela Euro 68. Biaya lini produksi baru saat ini adalah lebih dari 1 juta euro.

Kondisi: belum diuji (bekas), Slot spindle 2 pcs. Number of milling units: 7 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and trimming carriage ..... Machine properly dismantled and stored at our warehouse in 73447 Oberkochen. Video and pictures were taken prior to disassembly. Technical Data Summary (Please inquire separately for any potentially included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser guide light for identifying cutting section > Axial adjustment travel: 150 mm, NC axis, electronically infinitely adjustable > Radial adjustment: pneumatic, 8 positions, e.g. for top edge rounding Rounding unit ..... > Position: horizontally bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment: mechanically linked with cross-cut saw. > Radial adjustment: pneumatically controlled On/Off electronic length stop ..... > Length: 4,500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm Pgsdsx H Al Nepfx Aqvjt > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Clamping length: 640 mm, with counter bearing > Axial adjustment travel: 580 mm, NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter hold, complete clamping length is counter-supported Transfer belt ..... For transfer of parts to longitudinal processing, including double-part separation before infeed to longitudinal processing. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically adjusted to tool diameter 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Clamping length: 400 mm, with counter bearing > Axial adjustment travel: 350 mm, NC axis, infinitely adjustable > Radial adjustment travel: 80 mm, NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Kondisi: baru, Tahun pembuatan: 2024, de_001 Pedju Nyxwopfx Aqvegt