Mesin pengukur koordinat

Renishaw InVia Raman Microscope Spectrometer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS Nsdpfx Aew T Tcwshrodc 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Ndedpfx Aheuz If Nersc Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turrets: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] Ndsdsypxqropfx Ahrsc - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Footprint: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE HOURS - Powered hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT - Control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Bar feeder interface

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 200 mm, rentang pengukuran sumbu Y: 200 mm, rentang pengukuran sumbu Z: 200 mm, masa garansi: 12 bulan, jarak pergerakan sumbu X: 200 mm, jarak lintasan sumbu Y: 200 mm, jarak gerak sumbu Z: 200 mm, tegangan masuk: 230 V, panjang pemakanan sumbu X: 200 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 200 mm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pencahayaan, Refurbished Mahr MS 222 Multisensor Measuring Device (Optical Measuring Instrument) LIKE NEW, including acceptance certificate prior to delivery and free shipping within Germany* Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or forwarding company, worldwide shipping possible! Online demonstrations or optionally on-site demos with customer parts, technical application advice provided by accredited Profitech measuring laboratories during project planning. Complete service available upon request: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training programs also bookable as online courses. Rental, leasing, or financing available directly via Profitech without financial institutions. Measuring device can be configured to customer requirements. Measuring range: 200 x 200 x 200 mm Nedpfx Ajglp Nqohrsdc Loading weight (glass plate): 10 kg Scale resolution: 0.1 μm Max. traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine weight: 170 kg Control cabinet weight: 90 kg Length measurement uncertainty: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Optional extension: Renishaw probe system (TP20, TP200, SP25) on request Retrofit 2025 Including PC and software Maximum traverse speed: 150 mm/s Dimensions: 900 x 750 x 950 Weight: approx. 90 kg Manufacturer’s sample image *Commissioning, on-site calibration, and training not included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 24.140 h, berat keseluruhan: 10.000 kg, produsen pengendali: FANUC, model controller: 31i-NT-SmartX, jumlah sumbu: 9, This 9-axis Nakamura NTJ100 turning-milling center was manufactured in 2017 and features a bar capacity of up to 65 mm, as well as two spindles with maximum speeds of 4,500 and 5,000 rpm, respectively. It comes equipped with a Samsys bar feeder, an Absolent extraction system, and a wide range of automated features, including through-spindle coolant supply, parts catcher, and automatic tool presetting devices. Seize the opportunity to purchase this Nakamura NTJ100 turn-mill center. Contact us for further information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: Han-Bei probe for automatic workpiece measurement (infrared or radio) for both left and right spindle • Left and right, with automatic swivel and 2x 4 measuring directions for fast, precise tool presetting via NC function • Operating hours: 43,399h • Coolant system: Coolant through spindle (CTS); coolant float switch for machine stop at low level; additional coolant flush through both spindles (left and right) • Bar capacity: Ø 51 mm • Type A parts catcher with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck air blow device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connecting stub Ø 150 mm • Robot/automation preparation: Pneumatic flap for robot handling on the top of the door, opening approx. 400 x 400 mm • Handwheel for manual positioning of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Three-color signal light Nodpfxox D Iuze Ahrodc The Samsys bar loader with 1.5 m loading length has the following dimensions: Length: 225 cm + 43 cm intermediate guide; Width: 120 cm (including loading ramp and control panel); Height: 145 cm or 180 cm with open hatch The machine was mainly used for machining aluminum (95%). Additional equipment: • Samsys bar feeder, including extension • Absolent extraction unit • Hinged belt chip conveyor with interface, interval control, and alarm monitoring

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Citizen C16-VII CNC Swiss Type Lathe Year of manufacture: 2004 Control: Mitsubishi Meldas 635 Max. machining diameter: 16mm C-axis: Main and Sub Spindle 5 controlled servo axes: X1/Z1/Y1/X2/Z3 4 driven tools on the vertical tool holder C-axis: Main and sub spindle Including accessories: LNS Express 220 bar feeder, conversion kit for 16mm and 10mm Donaldson Torit extraction system Chip conveyor Ndodpfx Ahev Rhd Hjrjc - Immediately available -

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), - GEBRAUCHT - 6-ACHSEN-SCHIEBEKOPF-DREHMASCHINE MIT STANGENLADER Nsdjvthv Ispfx Ahrsdc MAX. DREHLÄNGE: 320 mm MAX. DREHDURCHMESSER: 32 mm SPINDEL: 200-8000 U/min; 3,7 - 7,5 kW GEGENSPINDEL: 200-7000 U/min; 1,5 - 2,7 kW X1-ACHS-VERFAHRWEG: 108 mm X2-ACHS-VERFAHRWEG: 228 mm Y1-ACHS-VERFAHRWEG: 275 mm Z1-ACHS-VERFAHRWEG: 325 mm Z2-ACHS-VERFAHRWEG: 130 mm Z3-ACHS-VERFAHRWEG: 410 mm EILGÄNGE X-Y-Z: 20 m/min ANGETRIEBENER REVOLVERKOPF: 8 STELLUNGEN; 200 - 5000 U/min STEUERUNG: CINCOM SYSTEM M6D STANGENLADER: IEMCA Mod. BOSS 332 EVOLUTION GEWICHT: 2.850 kg ZUBEHÖR: TEILEFÄNGER

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, nomor mesin/kendaraan: R14507, en-01 Ndjdjya Aq Rjpfx Ahrjc

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 9.911 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 450 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 310 mm, gerak cepat sumbu X: 75 m/menit, pergeseran cepat sumbu Y: 75 m/menit, pergerakan cepat sumbu Z: 75 m/menit, daya nominal (semu): 17 kVA, tinggi total: 2.300 mm, panjang total: 1.500 mm, lebar total: 2.600 mm, berat keseluruhan: 3.400 kg, kecepatan spindel (maks.): 30.000 rpm, hidung spindel: HSK40, jumlah slot dalam magazin alat: 40, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, de Nsdpox Iiw Isfx Ahredc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 51.488 h, Mesin bubut tipe swiss Citizen CINCOM A32-VII CL ini diproduksi pada tahun 2014. Dilengkapi spindle utama dengan kapasitas 32 mm, counter spindle, serta panjang pembubutan maksimum hingga 3000 mm. Dilengkapi sistem CHIDOMI berkecepatan tinggi, mesin ini mendukung pergerakan simultan di semua sumbu dan menawarkan kecepatan pemakanan hingga 9.000 mm/menit. Pertimbangkan kesempatan untuk membeli Citizen CINCOM A32-VII CL tipe swiss ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Nedpfex D Nhpsx Ahrjdc Jenis Aplikasi Bubut