Ruang filter press

REWA REWA SP 2- 390/14

Kondisi: baik (bekas), UV curing oven for production line Dkodpet Ag Uqsfx Abheh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. Djdpfx Ajl Dw D Ejbhokh The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Kondisi: baru, Filter cloths for all types of filter presses, available in all sizes and qualities. Short delivery times—contact us for more information. Location: 58762 Altena. Dksdpfsg Azmmsx Abhoh

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. Dkedjgwt S Tepfx Abhoh You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiusverschil ----- 50/230 Buigsnelheid/herhaalbaarheid ----- 230º/s. ±0,05° Dorne-lengte ----- 1 000–∞ Gewicht ----- 5000 kg Machinedimensies ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten volgens VDMA-, ISO- en DIN-normen OPTIES * Online verbinding met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij Dodpfx Aboga T E Ashjkh programmeerbare robot of laadarm * Lasnaadherkenning en buispositionering, elektromagnetisch of optisch * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Dksdpfx Abefzktzshjh Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Semiautomatic band saw for high-performance and highly precise cutting of medium-sized solid bars and profiles. The robust construction provides the machine with the necessary rigidity and cutting unit precision. Band operation is via a two-speed motor and a special reduction gear with bronze gear and tempered, ground worm screw. Flywheels are appropriately dimensioned. Sturdy band guides made with sealed ball bearings and adjustable carbide (Widia) plates. Blade tension is achieved by an electromechanical device with a micro-switch blade rotation control. Safety devices are installed on the flywheel covers and the blade for operator protection. Cutting thickness: 1.5 mm Dsdpfjfibd Tox Abhjkh Cutting range: 60° left / 60° right Adjustable stop for repeated cuts to the same length Band cleaning device with brush Hydraulic power unit motor: 0.37 kW Electric pump for band coolant: 0.09 kW Vice jaw height: 200 mm Vice jaw length: 185 mm Worktable height: 760 mm Machine weight: 820 kg

Kondisi: baru, Tahun pembuatan: 2024, Tunneltyp-Teilereinigungsanlage für Metall- und Kunststoffteile. Einsatz in diversen Branchen wie Automobilindustrie, Lebensmittelindustrie, Metallbearbeitung, Blechverarbeitung, Kunststoffbehälter usw. Funktionsprinzip Das Werkstück gelangt über ein Bandförderer-System in den Reinigungstunnel; durch gezielt platzierte Düsen werden sämtliche Bereiche des Werkstücks gereinigt. Während das Werkstück den Tunnel durchläuft, wird es kontinuierlich mit einem Gemisch aus erhitztem Wasser und Reinigungschemikalien unter Druck gewaschen. Dabei werden sämtliche Öle, Späne und sonstige industrielle Verunreinigungen von der Oberfläche entfernt. Tunnelwaschanlagen werden sowohl standardisiert als auch individuell anwendungsspezifisch von der INTERSONIK-Ingenieurabteilung konzipiert. Dksdpjd I Azvofx Abhsh Ablauf des Reinigungsprozesses Waschen, Passivieren und Trocknen werden von den Intersonik-Prozessingenieuren exakt entsprechend der gewünschten Ergebnisse mit umweltfreundlichen Intersonik-Chemikalien entwickelt. Betriebsablauf ► Vorwäsche ► Hauptwäsche ► Spülung ► Passivierung ► Trocknung Anwendungsbereiche ► Automobilindustrie ► Wehrtechnik ► Lebensmittelindustrie ► Für alle Fertigungsindustrien bei Serienfertigung und Wartungszwecken ► Metallmöbelindustrie Das Förderbandsystem wird von INTERSONIK speziell nach Ihren Anforderungen und Werkstücken konstruiert und gefertigt. Förderbandgeschwindigkeit ist einstellbar. Automatisches Flüssigkeitsnachfüllen ist Standard. Elektrische Beheizung ist Standard, Wärmetauscher- und Brennerbeheizung sind optional. Alle Betriebsdaten können über Digitalanzeigen eingesehen und gesteuert werden. SPS-Steuerung ist optional verfügbar. Alle Flüssigkeitstanks sind wärmeisoliert. Absaug- und Nebelabscheideeinheit sind standardmäßig integriert. Für weitere Optionen und Details stehen wir Ihnen gern zur Verfügung. Tunnelwäsche, automatische Teilewaschanlage, Kfz-Teilereinigung, Metallreinigung, Teilereiniger, Entfettung, Spritzreinigung, Druckwaschmaschine

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas tangki: 30.200 l, tinggi total: 6.000 mm, diameter dalam: 2.800 mm, berat keseluruhan: 1.400 kg, TECHNICAL SPECIFICATIONS - Flat-bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 liters - Material: Stainless steel 316 L - Internal finish: cold-rolled - External finish: cold-rolled - Temperature-controlled ROOF Dkedpfov I A Nljx Abhoh - Conical - 1 eccentric chimney at front, Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting lugs RING - 1 oval manhole 310×420 mm - 1 partial discharge valve DN 65 - 1 connection for level probe BOTTOM - 2% sloped plate with Boitard - 1 full-discharge valve with sealing cap ADDITIONAL INFORMATION - Tank compatible and suitable for liquid fertilizer storage - 6-month warranty - Conforms to CE standards

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, as new Dedjqfguaspfx Abhskh * Laser power: 5 kW * Wavelength: 1030 nm * Beam quality: 4 mm mrad * Beam switch with 4 fiber outputs, min. fiber diameter: 100 µm * Fiber connector: LLK-D * Optional: Fieldbus interface & IIO3 card available * 2 units available