Pusat pemesinan dengan umpan tembus

Robland BM3000 II

Kondisi: baru, Tahun pembuatan: 2026, Y-axis drilling: 920 mm Y-axis sawing: 860 mm X-axis: 3000 mm Z-axis: 12 mm - 40 mm A-axis: 360° Min. panel dimensions: (X) 300 mm x (Y) 120 mm x (Z) 12 mm Feed rate: 20 m/min Drill diameters: 5 mm / 20 mm / 35 mm Milling tool: 8 mm Grooving saw: 90 mm x 3.5 mm Maximum groove depth with saw blade: 10 mm Min. hole diameter: 3 mm Max. hole diameter: 35 mm Pgedpfxel D Rw Es Abxji Motor power: 1.3 kW Weight: 500 kg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, For wood chips and wood dust. Designed for commercial applications. All clean air extraction units in this series are H3 dust-tested, with a residual dust content of less than 0.1 mg/m³. High extraction performance with minimal space requirements Maximum performance in this class Very quiet operation Application area: Clean air extraction units for wood chips and wood dust Designed for commercial use Suitable for all woodworking machines with the corresponding extraction port diameter Can also be used for multiple dust sources High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction port can be easily converted from left to right, offering flexible use Large maintenance openings Large-capacity, mobile chip containers with clamping bracket and chip collection bag System is delivered completely assembled – ready for immediate use Mobile unit Filter description: Ultra-compact design with maximum filter surface area Filter material made from polyester fleece, aluminized, washable, providing a long service life Filter supplied as standard in antistatic design, BIA category M-tested and approved Filter resistance monitoring via differential pressure gauge, adjustable with warning light on the control panel The fan is installed downstream of the filter Standard features: Innovative locking device for secure container positioning All units of this series H3 dust-tested, residual dust content less than 0.1 mg/m³ Scope of delivery: Metal impeller Maintenance opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter 2 fixed and 2 swivel castors with locking brake Preconfigured for machine monitoring connection (up to 8 machines) and slide valve controls Manual filter cleaning Optional sound pressure silencer available Model: RLA 125 M Item No.: 5131256 Technical Data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal air flow rate: 1095 m³/h Max. air flow rate: [not specified] Negative pressure at nominal flow: [not specified] Filter surface area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from bottom edge of extraction port to floor: 850 mm Pgodpfx Ajcnw U Debxei Weight: 194 kg Location: Arriving in stock at 54634 Bitburg

Kondisi: bekas, Tahun pembuatan: 2019, used-machine year of manufacture: 2019 Features and technical specifications: - For classic nesting processing with wear plate - Machine frame in welded construction, equipped with ground and hardened prism guides for the gantry, aggregate head, and consoles - Gantry-type bridge design - Helical rack-and-pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Maximum support surface on nesting table: X = 3100 mm Y = 1560 mm - Maximum travel paths: X = 4695 mm Y = 2100 mm Z = 293 mm - Maximum clearance height over DYNESTIC table Z = 100 mm from table surface (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC Table: - Fixed, continuous working table with grid division - Continuous grooves in X and Y direction - Groove spacing: 50 mm - Includes 25 meters sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drill Unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - U-shaped arrangement - 5+4 in X and 4 in Y direction - 32 mm pitch - Max. drill diameter: 35 mm - Total drill length: 70 mm from connection end (depending on panel thickness) - Spindle projection stroke: 70 mm - Rotation direction: Alternating right/left - n(max): 1,000 - 4,400 rpm, stepless control - Tool holder: M10 thread – 11 mm fitting - Without tools and holders - 6 horizontal spindles: - 2 double-drilling spindles in X direction - 1 double-drilling spindle in Y direction - Tool holder: M10 thread, 11 mm fitting - Max. total drill length: 63 mm from connection end - Without tools and holders - Milling Unit 7842: - Power: 12.0 kW (S6) - n(max): 1,000 – 24,000 rpm, stepless control - Max power at 12,000–24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand thread nut (for right-rotating tools) - With collet chuck with HSK shank - Hybrid ceramic ball bearings - Max tool weight: 6 kg (including holder) - Tools: Milling and sanding tools, max. Ø160 mm - Safety housing according to CE standard - Lateral and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Operator safety with light barriers in the front machine area - Handheld operating unit for remote machine control with the following functions: - Start/Stop machining program - Speed control for machining cycles - Reset button - Manual feed/rapid traverse for all axes - Emergency stop Podpowka Upsfx Abxegi - CAMPUS V7 CAD/CAM software, 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM functions for creating part variants with macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional dust sealing by overpressure in each guide carriage

Kondisi: bekas, nomor mesin/kendaraan: 007350, X-axis working range: 4000 mm Y-axis working range: 1400 mm Working area: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Pgodpswcyd Ijfx Abxji Number of drilling spindles: 30 Number of tool positions: 28

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, I am selling a vertical throughfeed CNC machining center Vitap Point K2 2.0, year of manufacture 2019. Configuration: - 1 pc. milling spindle, 5.0 kW Pgjdpfx Abjvx Dz Dsxei - 12 + 4 + 4 pcs. drilling spindles - 1 pc. grooving saw Return system: draws the elements back to the operator or discharges them to the rear as a throughfeed machine. Element max. size: x 1250 x 50 mm Element min. size: 270/400 x 185 x 4 mm Overall dimensions: 2900 x 1650 mm Total weight: 950 kg Supplied with full documentation and CE certificate. Very good condition. Immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Maximum working size (mm): 400 x 300 mm Distance from saw blade to work table (mm): 3–200 mm Conveyor belt width (mm): 385 mm Saw wheel power (kW): 18.5 kW Diameter of saw assembly gear wheel (mm): 711 mm Feed speed (m/min): 0–12 m/min Hydraulic pressure (kg/cm²): 55 kg/cm² Dust extraction outlet diameter: 102 mm x 2 Saw blade size (L x W x H) (mm): 4572 x 27 x 0.9 mm Saw kerf (mm): 1.5–1.8 mm Podei Ay Hqspfx Abxogi Overall dimensions (L x W x H) (mm): 3000 x 2250 x 2000 Net weight (kg): 2100 kg

Kondisi: bekas, de-to-hu-it-lt-001 Podpfsw H Iv Tex Abxegi

Kondisi: bekas, Tahun pembuatan: 1992, Number of spindles per row: 16 Number of horizontal spindles: 5 Cup hinge boring head: yes Drill spacing: 32 mm Hold-down device: yes / pneumatic Pgjdpfxjwv Nb Ne Abxei Power consumption: 2.2 kW Drilling unit: swiveling

Kondisi: sangat baik (bekas), Three-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Movable horizontal table (workpiece), stationary working head Control (BiesseWorks software), with separate electrical and control panel Working head safety enclosure, safety tread mats Entry support table (workpiece support) No. 2 workpiece clamping vices within the working area Exit table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm 3000 x 1300 x 60 (approx.) Total connected load (kW) 24 WORKING UNITS (TOP): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) Pgsdpowb Alljfx Abxji WORKING UNITS (BOTTOM): Independent vertical drilling spindles No. 29 Independent horizontal drilling spindles No. 10 (8 X + 2 Y) Grooving saw unit (for processing along X-axis), diameter 160 mm (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Tahun pembuatan: 2001, jam operasional: 123 h, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 123, Chip silo diameter: 5 m Height: approx. 8 m Net capacity: 42 m³ Pgodpfx Asftdv Usbxsi Suitable for storage of sawdust. Inspection possible at our warehouse in H-2013 Pomáz at any time by prior arrangement.