Mesin cuci bertekanan

ROMER /Myjki ciśnieniowe Myjka Ciśnieniowa

• PLC Microprocessor Control
• HMI Control Panel
• Phases can be changed manually or automatically – temporarily
• Two separate circuits for water and chemicals, closed-loop system
• Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown
The control box features IP54 technology
User manual, declaration of conformity, 12-month warranty.
Tsdpfofz Dvcsx Adcsd

ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks.

Filtration system
Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance.

Washing dimensions
The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane.

High-pressure pumps
The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components.

Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.