Mesin briket

RUF LIGNUM Classic

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result. Ledpfsfhql Tjx Aahjak

Kondisi: baru, Tahun pembuatan: 2025, Motor 7.5 kW, 50 Hz, 380 V, 3-phase Splitting force 20 t Automatic saw: yes Maximum log diameter: 38 cm Maximum log length: 61 cm Infeed length: 1.8 m Chainsaw/splitting drive: hydraulic, max. 4800 rpm Saw and feed control: hydraulic Conveyor belt with winch, 3.2 m length / 250 mm width Conveyor belt angle: ±15° (manually adjustable) Conveyor speed: 0.8 m/s Chainsaw: 22" Cylinder diameter: 4" Conveyor belt length: 3.2 m Cycle time: 6 seconds 12" trailer tires 4-way splitting wedge Hydraulic oil capacity: 32 L Weight: 737 kg The machine is mounted on a chassis with a ball hitch. Lodjv Dvhyjpfx Aahsak The log saw and splitter is equipped with a 3.2 m long conveyor belt which can transport the processed wood directly to a trailer. The maximum height for wood outfeed via the conveyor belt is 2 m. The machine’s throughput is approx. 5–8 cubic meters of wood per hour. This depends on the type of wood. Various optional accessories are available for the machine, such as a hydraulic log feed and splitting wedges.

Kondisi: baru, Tahun pembuatan: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD YOUR ADVANTAGES AT A GLANCE - Fully automated 24-hour operation possible Lasdpfonxkrbox Aahek - Durability - Low maintenance costs - Compact design - Direct integration into existing production lines possible - Over 35 years of experience The RUF LIGNUM Classic wood briquetting press is ideally suited for briquetting medium quantities of wood shavings generated in the wood-processing industry. The briquetting process enables additional revenue and reduces storage and transport costs. Another advantage lies in the flexibility of our wood briquetting presses: they can process various particle sizes into high-quality briquettes without the use of binders. As a valuable energy source, RUF briquettes provide a higher utility value and an optimal CO2 balance. Moreover, our LIGNUM series excels, thanks to the innovative RUF hydraulic system, with high energy efficiency and low wear. Technical Data RUF LIGNUM CLASSIC - Max. throughput wood (kg/h): 410 - Motor power (kW): 30 - Max. specific pressing pressure (kg/cm²): 1700 - Briquette format (mm): 150x60 - Dimensions (m) Length x Width x Height: 2.1 x 1.9 x 2.0 - Approx. weight (t): 3.3 t - with extraction stubs - PACKAGING TABLE INCLUDED FREE OF CHARGE

Kondisi: sangat baik (bekas), mesh box, load carrier Lsdpfx Aajlcct Sshsak Collapsible Color: green Base: flat steel plate External dimensions: 1600x1200x1000 mm Weight: 150 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tahun perombakan terakhir: 2022, Dijual satu lini produksi BSH lengkap. Instalasi terdiri dari komponen dari System TM (bagian pengumpan), Keilzinken Technik NKT, automasi HIT (gudang bertingkat, transportasi, stasiun perbaikan pengumpanan lamella, mesin serut dan Kallesoe, dll.). Mesin serut dari REX: serut awal, serut lamella dan serut finishing. Mesin press frekuensi tinggi dari Kallesoe. 2 silo. Ljdpewgcchsfx Aahjak

Kondisi: baru, Tahun pembuatan: 2024, New machine Lasdpfxjt Hagno Aahok Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Tahun pembuatan: 1992, Kondisi: sangat baik (bekas), Vertical saw E.Gillet cutting line. Includes wood infeed and outfeed conveyors. Maximum cutting length: 6.5 m. Condition: very good. Laodoi Egn Uopfx Aahek

Tahun pembuatan: 2023, Kondisi: baru, In the field of 3D thermoforming, we also offer presses, turners, film storage paternosters, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top quality and suitable for every membrane press (for film and veneer pressing). You can purchase our membranes pre-cut to your required dimensions or as roll goods. Ledsd S Efaopfx Aaheak SILICONE Type: MS-2 Color: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore/hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Color: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore/hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Color: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore/hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Color: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore/hardness: approx. 42° / 60° Shore Thickness: 3.5 – 4 mm Operating temperature: max. 130°C Standard SILICONE Type: RSS Color: red-brown or transparent (other colors on request) Surface: both sides smooth Standard length: cut to size or 10 m roll (other lengths on request) Standard width: 1200 mm – up to 1800 mm on request Polymer: silicone Shore/hardness: 30° – 80° Shore Thickness: 0.5 – 10 mm

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 8 mm, Perlengkapan: kabin, Complete Artiglio log saw with Eagle 1100/I carriage. Serviced by Artiglio in 2018. In excellent condition. Ledpfx Aaev Sr U Eohjak

Kondisi: bekas, Tahun pembuatan: 2007, 3177 Optimizing Cross-Cut Saw Grecon Dimter OptiCut 200-1 Used, Year of manufacture: 2007 For cutting fixed lengths Laodou Atmuepfx Aahek Processable wood dimensions: Infeed length min./max.: 3000 - 5000 mm Infeed width min./max.: 80 - 200 mm Infeed thickness min./max.: 38 - 80 mm Max. wood cross-section: 200 x 50 mm Finished wood length min./max.: 700 - 1000 mm Average number of cuts/board: 5 Suitable wood types: Softwood or hardwood Performance of the system: Feed speed max.: 180 m/min, infinitely variable Time per cut incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor before saw Length 1.5 m, coupled with the saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated blow-off device for waste Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station with drive unit, without ejector Conveyor length approx. 1.5 m Machine already dismantled and in storage The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of a customer, ex location Austria, excluding transport and installation Subject to error in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale is made as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, all warranties are excluded; the following applies: “sold as seen” Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location