Perencana ketebalan

SAC RS63

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Tedpfx Ajg Tu Rkod Roa Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), lebar pemotongan (maks.): 1.000 mm, diameter mata gergaji: 550 mm, penyesuaian kemiringan mata gergaji: 45 °, Perlengkapan: Penandaan CE, dokumentasi / manual, pelindung bilah gergaji, Kontrol layar; pagar paralel; penyimpanan hingga 20 program; meja gulir ganda 3000 mm; lebar potong 1000 mm; tinggi potong 200 mm; perpanjangan meja 840 mm; tiga kecepatan putar tersedia: 3, 4, 5 rpm. Todpfxey Nyuae Ad Rja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Dibangun pada tahun 2011. Todpfx Aod N D Npsd Rja

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Volumetric flow rate: 13,600 m³/h, pressure increase: 3,100 Pa, speed: 1,500 rpm, motor power: 18.5 kW, weight: 790 kg, equipped with STBB HAB S chip container, including complete documentation. Todpji A Ix Hofx Ad Rea

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Tjdpfx Adeg A D Anj Roa Width: 1656 mm Height: 2025 mm

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Gergaji Lingkar Format ALTENDORF HAND GUARD Perangkat Lunak Terbaru 7/26 Edisi TwinFlex dengan layar sentuh 12 inci, troli ganda, dapat diputar ke kedua sisi, Penghenti paralel, penyesuaian manual, Penghenti paralel dengan penyetelan halus, Kontrol pada ketinggian mata, dapat diputar, Tjdpozgwl Ijfx Ad Roa Input dimensi melalui layar sentuh, Kontrol F 45 ElmoDrive, Penyetelan ketinggian elektrik, Penyetelan putaran elektrik, Sistem penjepit alat AKE, Koreksi otomatis ketinggian pemotongan, saat unit gergaji diputar, Kalibrasi sumbu yang mudah, Diagnosis mesin, Penghitung jam operasi, Antarmuka USB, Tahan debu ----- Data Teknis ----- Rentang putaran: 0 - 46 °, Panjang pemotongan: 3.000 mm, Lebar pemotongan: 1.000 mm, Diameter maksimum mata gergaji: 450 mm, Protrusi maksimum mata gergaji: 150 mm, Penghenti sudut dengan posisi tetap: 90 °, dapat disesuaikan secara manual melalui skala dimensi: 3.200 mm, Kecepatan putaran: 3.000 / 4.000 / 5.000 RPM, Daya motor 400 V: 7,5 HP / 5,5 kW, Ukuran layar: 12 ", Tinggi mesin: 91 cm Sistem perlindungan optik: Dua kamera mengumpulkan data untuk pengenalan tangan dari area yang luas di sekitar mata gergaji. Begitu tangan yang masuk terdeteksi, penurunan cepat dan penghentian cepat unit gergaji terjadi dalam seperempat detik. EDISI TWINFLEX - Troli ganda 3.000 mm - Protrusi mata gergaji 150 mm - Daya motor VARIO 5 kW (6,8 HP) - Putaran ke kedua sisi - Penghenti sudut miter DIGIT LD, panjang hingga 3.200 mm - Penghenti paralel CNC, lebar pemotongan 1.000 mm - Sakelar hidup/mati pada troli ganda - Penahan templat - Biaya tambahan untuk daya motor 6,5 kW (8,8 HP) ALTENDORF dengan VARIO, untuk putaran ke kedua sisi - Unit alur awal 2 sumbu, 2 sisi, ALTENDORF dengan penyetelan ketinggian dan samping motorik Ketinggian bilah alur dapat diprogram - Penurunan cepat dan pengangkatan cepat, - Motor penggerak 0,75 kW (1 HP), 8.200 RPM. - Sistem alur awal RAPIDO 180 mm ALTENDORF untuk putaran ke kedua sisi - Lampu LED pada unit alur awal ALTENDORF - Troli ganda 3.400 mm, ALTENDORF - Penghenti paralel CNC, 1.300 mm, ALTENDORF - Lengan kamera, dapat diputar ALTENDORF - Roda penyangga depan ALTENDORF Lebar 300 mm - Meja bantal udara ALTENDORF - Perpanjangan meja 840 mm ALTENDORF dengan bantal udara - Versi HandGuard 2025 baru Mesin dijual dengan garansi baru 1 tahun. Mesin dapat dibeli dengan harga khusus. Kami akan dengan senang hati memberikan penawaran kepada Anda.

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Todpfx Aded N S T Dj Rea Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal stop flaps • Support table with roller • Push stick • Independent scoring unit with dedicated motor • Operating tools Features • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°

Kondisi: baik (bekas), Toyo Jidoki Beutelfüllmaschine mit Vakuumoption. Stammt aus einer großen britischen Lebensmittelproduktion, wurde jedoch seit mindestens fünf Jahren nicht mehr genutzt. Tjdsuf A Idepfx Ad Rsa

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Todpfel Rix Ejx Ad Rsa Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 114550, lebar kerja: 230 mm, tinggi penyerutan: 120 mm, jumlah spindel: 6, Planer and moulder Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control and the proven PowerLock quick-change system. Additionally, it features a mechanized return system for the planed workpieces, which is ideally suited for efficient production. Machine Equipment - 6 spindles - 1st spindle: 7.5 kW, 8,000 rpm - 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock - 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock - 4th spindle: 7.5 kW, 8,000 rpm, PowerLock - 5th spindle: 7.5 kW, 8,000 rpm, PowerLock - 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable: 2.5 m (including jointing fence) Spring-loaded top pressure rollers Side pressure pneumatic Frequency-controlled feed with brake Feed speed: 5 – 30 m/min Reduced feed roller gap between feed pendulums (400 mm) Additional feed rollers and shortened roller spacing Durofer steel roller, self-cleaning Infeed roller before 1st bottom tool pneumatic Tjdex Sxfvjpfx Ad Roa Siemens/ Powercom control The machine is in very good, well-maintained condition, has been professionally operated and regularly serviced, and will remain in operation until 17.12.2026. Viewing of the running machine is possible by arrangement at any time. The price includes the tools for the 6 spindles. Dismantling and loading will be charged separately to the buyer. The technical description and machine layout can be found in the documents.