Wide-belt sander

SAC rte 1000

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 690924, Connection rating 380V 1.84kW Speed 2840 rpm Cedpjh U Damjfx Anpjhd Number of spindles: 21 units, 32 mm pitch Spindle spacing 640 mm Spindle rotation: 11 right-handed, 10 left-handed, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Please note: We are unable to respond to inquiries without complete contact details.

Kondisi: diremajakan ulang (bekas), REKORD 400 MODIFIED WITH TANK AND COOLING SYSTEM SHARPENING MACHINE FOR TUNGSTEN CARBIDE AND HSS CIRCULAR SAWS (FULL OIL SYSTEM) FEATURES Grinding wheel diameter: 150 mm Grinding wheel motor: 1 HP Grinding box movement motor: 0.25 HP Cooling system indicator (full oil) Electronic cam reading system (SLOW CONTROLLED BACK FINISHING) Magnifier lamp (FOR SMALL TEETH) Sharpening speed electronically adjustable via potentiometer Manual cutting angle adjustment via scale rod 1 copy wheel diamond wheel, diameter 150 x 4 mm - 60° 1 Bakelite wheel for HSS Chjdoh A N R Sjpfx Anpjd Minimum blade diameter ..... mm 30 (with small blade holder on request) Maximum blade diameter ..... mm 400

Tahun pembuatan: 1982, Kondisi: bekas, En buen estado Chjdpfjdq Ug Iox Anpod

Kondisi: diremaj di bengkel (bekas), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Codpfx Ansv D H Sispjhd Motor power approx. 3.0 kW Table height adjustment: mechanical Right and left rotation 2 belt speeds Abrasive belt cover on top CE certified Including special grinding shoe Note – Used machines: • Technical details and prior sale subject to change and error. • All stated prices are ex-works - loading free of charge at location! • The machines have been cleaned and function-tested. • All machines are sold as seen, without any warranty claims whatsoever. Buyers are free to inspect the machines at the location. • Special agreements are only possible in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Cjdpfx Asg A D Anenpehd Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: sangat baik (bekas), Waelzkolben pump (Roots blower) Manufacturer: Pfeiffer Type: Okta WKP 2000 A M Pumping speed: approx. 2,065 m³/h Warranty: 12 months Cjdpfx Ajdiwcconpshd

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Motor 4 kW 4 pisau Panjang meja 198 cm Lebar meja 41 cm Chjdeul Utmopfx Anpod

Kondisi: siap digunakan (bekas), Jumlah Spindel: 6 buah Lebar kerja: 230 mm Tinggi serut: 120 mm Panjang meja perata: 2000 mm Motor penggerak: 4 kW Kecepatan pengumpanan: 5-24 m/menit Mesin serut dan alur WEINIG Unimat 23 E ----- 6 spindel (2 di antaranya di sebelah kanan), motor yang diperkuat, 8.000 RPM, kontrol ATS Mesin dibersihkan dan diuji fungsinya sebelum dikirim. Lebar kerja: 20 - 230 mm Tinggi kerja: 8 - 120 mm 1. Spindel bawah: 5,5 KW (motor diperbarui) ----- Diameter: 40 mm Kecepatan: 6.000 RPM Lingkaran putar alat: 125 - 180 mm Perangkat alur termasuk alat Sisipan meja dikeraskan di depan spindel bawah pertama 2. Spindel kanan: 12,1 KW (motor diperbarui) ----- Motor bersama dengan spindel vertikal kiri Diameter: 40 mm Kecepatan: 8.000 RPM Lingkaran putar alat: 112-250 mm Diameter alat maksimum di belakang bidang penahan: 203 mm Kedalaman alur maksimum: 35 mm Rentang penyesuaian aksial: 80 mm 3. Spindel kiri ----- Motor bersama dengan spindel ke-2 Diameter: 40 mm Kecepatan: 8.000 RPM Lingkaran putar alat: 112-200 mm Kedalaman alur maksimum: 35 mm Rentang penyesuaian aksial: 80 mm Penyangga tekanan di depan spindel kiri, termasuk Chsdpfx Anjxz Hh Uepsd penekan rol samping, dengan pegas 4. Spindel kanan: 8,3 KW (motor diperbarui) ----- Diameter: 40 mm Kecepatan: 8.000 RPM Lingkaran putar alat: 112-250 mm Diameter alat maksimum di belakang bidang penahan: 203 mm Kedalaman alur maksimum: 35 mm Rentang penyesuaian aksial: 80 mm 5. Spindel atas: 7,5 KW ----- Diameter: 40 mm Kecepatan: 8.000 RPM Lingkaran putar alat: 112-200 mm Kedalaman alur maksimum: 35 mm Rentang penyesuaian aksial: 45 mm Penyangga tekanan terpisah di depan spindel atas, dapat disesuaikan pada lingkaran putar alat dan dapat diputar menjauhi alat, dengan pegas. 6. Spindel bawah: 4,0 KW ----- Diameter: 40 mm Kecepatan: 6000 RPM Lingkaran putar alat: 112-250 mm Kedalaman alur maksimum: 15 mm Rentang penyesuaian aksial: 45 mm Spindel secara umum ----- Semua spindel alur dengan akurasi putaran yang tinggi. Titik pelumasan untuk gerakan spindel aksial. Sistem pengumpanan ----- Motor dengan rem mekanis, 4 KW Pengumpanan mekanis yang dapat diatur secara bertahap: 5--24 m/menit. Rol penarik di depan alat bawah pertama dikontrol naik-turun secara pneumatis, Rol bergerigi Durofer (paten Weinig) dengan pembatas kedalaman dan membersihkan diri Rentang penyesuaian rol pengumpanan relatif terhadap spindel kiri, aksial 35 mm Elektronik mesin ----- Tegangan operasi: 440 V (rentang tegangan 380 - 420 Volt), 50 Hz. Rangka mesin, meja, dan penahan ----- Meja perata panjang 2,0 m (termasuk penggaris pengarah) Pompa Waxilit manual untuk perawatan meja Satu rol karet yang digerakkan (dengan pegas di meja keluar) Dua rol yang digerakkan di meja mesin, dikeraskan Pengoperasian mesin ----- Penyangga tekanan di depan spindel atas dengan tampilan digital mekanis. Pengeluaran setelah spindel atas dengan tampilan digital mekanis. ATS/Sistem, pemosisian 2 sumbu otomatis untuk spindel nomor 3 dan 5 Tinggi kerja minimum: 12 mm Penyesuaian ketinggian listrik dari spindel atas dan pengumpanan Posisi terpusat dari titik pelumasan di bagian depan mesin Tampilan digital elektronik pada spindel 3 dan 5, aksial, spindel 6, radial, spindel 4, aksial dan radial Keamanan dan perlindungan suara ----- Pelindung penuh untuk keamanan Mudah dinaikkan...

Kondisi: bekas, Costa multi-blade saw - Type: Lince - Maximum cutting height: 140 mm Codpfsvw Rplsx Anpehd - Motor: 30 kW

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 5,5 kW (7,48 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 7.000 mm, jenis penyesuaian ketinggian: listrik, tinggi total: 2.200 mm, panjang total: 3.550 mm, lebar total: 2.000 mm, berat keseluruhan: 870 kg, panjang penggilingan: 1.500 mm, berat benda kerja (maks.): 80 kg, diameter sambungan ekstraksi: 180 mm, lebar penggilingan: 950 mm, kecepatan rotasi (maks.): 1.435 rpm, kebutuhan tinggi: 2.200 mm, persyaratan ruang panjang: 3.550 mm, lebar yang dibutuhkan: 2.000 mm, penyesuaian ketinggian meja: 500 mm, Perlengkapan: dokumentasi / manual, Wide Belt Sander MS92-150 – 3-Roller Deflection, Belt Size 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine base with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment Chsdstwb U Aopfx Anpod - Grinding unit with contact roller - Electrically operated table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE-compliant design The rigid machine frame, constructed of welded steel, ensures extremely smooth operation. Both machine bases are designed with an offset to enable grinding of workpieces longer than the machine table itself. The grinding belt is guided by three deflection rollers, providing the operator with an exceptionally open and accessible workspace, ideal especially for use with hand sanding blocks. The belt drive is powered by a three-phase motor with a dynamically balanced drive roller. Belt tension is pneumatically adjustable. The dust collection device is dimensioned to efficiently capture grinding dust and direct it to the extraction port when connected to a suitable extraction system. To allow for fatigue-free operation, the grinding unit runs in play-free, precise roller guides. The machine table can be quickly and easily adjusted to the appropriate workpiece height via the electrical table lift. The table lift guide components are maintenance-free. For loading, the table can be extended sufficiently so that workpieces can be placed without the need to slide them under the grinding belt. All main electrical controls are centrally located for user-friendly operation. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small enclosures in “light grey” The standard machine is supplied with an initial equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling system for rotating and tilting workpieces. The handling system is mounted centrally beneath the infeed frame. To operate the handling system, the infeed frame is removed from the machine table. The handling system is equipped with four vacuum suction cups to hold workpieces and consists of: A bearing with a rotation axis featuring a brake disc at the rear. At the front of the rotation axis, a tilting device is mounted, which can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional indexing disc on the tilting head allows for fine adjustment of the workpiece to the sanding belt. The release of the rotation and tilt axes is pneumatically controlled by foot switch, while manual movement of the axes is required. Maximum permissible workpiece weight: as flat table with infeed frame = 80 daN; when using the handling device (on the clamping plate) = 25 daN or 120 Nm (relative to axis center).