Tekan transfer hidrolik

SACK & KIESSELBACH TRP 200

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally designed as an automatic transfer press, the machine was converted to manual operation in 2012, but can be retrofitted for automatic operation. The press is still assembled, connected to power, and is in very good condition. Year of manufacture: 2001 Pressing force (t): 200 Oil capacity (liters): 1100 Stroke (mm): 300 Todpfx Abehfwqzjvec Table dimensions (LxW) (mm): 600 x 600 Installation space (mm): 1000 Upper ejector stroke (mm): 25 Upper ejector force (t): 10 Total weight (kg): 12,000 Operating pressure (bar): 6 Rapid approach lowering speed (mm/sec): 375 Working speed (mm/sec): 18 - 40

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, Diameter benda kerja maks.: 400 mm Panjang benda kerja maks.: 300 mm Diameter chuck maks.: 500 mm Diameter lintasan maks.: 520 mm Sumbu X, langkah gerak: 1.110 mm Todpjxy Ac Sefx Abvjc Sumbu Z, langkah gerak: 595 mm Spindel utama: Daya 40 / 100% ED 47/34 kW Spindel utama: Torsi 40 / 100% ED 600 Nm Spindel utama: Kecepatan putar maks.: 2.850 rpm Fanuc 31i Tanpa sumbu Y

Kondisi: bekas, Tahun pembuatan: 1973, Spindle diameter: 130 mm X-travel: 3,000 mm Y-travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3,000 mm Y – Spindle head vertical: 2,000 mm Z – Spindle stroke: 1,000 mm Table dimensions (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 - 2,000 mm/min Rapid traverse for spindle head and column: 5,000 mm Quill feed: 0.5 - 1,200 mm/min Spindle speed range, partially stepless: 4.5 - 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Steplessly adjustable spindle speeds and feeds, individual motor-driven feeds - Travelling operator’s platform, pendant control panel, hand control unit, platform - Hydrostatic guideways in column movement - Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (h), one machined side - Hydraulic clamping for column/carriage, motorized tool clamping Tjdpfx Ast Hwt Ssbvoc - Comprehensive accessories, especially tool holders with and without tools - Free-standing chip extraction unit, clamping aids, one angle plate and plates, and much more

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Todpjv Rwu Usfx Abvec Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), two-hand operation

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Todpfor A Hcbox Abvsc Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Tsdpfx Aoyr Dmdobvoc Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Todpfx Aew T Tcwobvec Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Kondisi: sangat baik (bekas), Dijual mesin ini, sudah terpasang dan dapat diuji coba. Diameter benda kerja maks: 1600 mm Modul: 16 Todpfxev Nqppo Abvjc Daya motor utama: 12 kW Dimensi (P x L x T): 4300 x 2000 x 3170 mm Berat mesin: 18.500 kg Video mesin dapat dikirim melalui aplikasi WhatsApp.

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 18891, Towing capacity: 10 tons. Lift: 1000 mm 3 broaching stations Tjdpfx Ajbrcmkobvjc With chip conveyor + platform for above-floor installation and safety door

Kondisi: baru, New transfer press line from min. 300t up to max. 3500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your requirements. Let us know your needs and we will create an attractive offer including installation and service. ISGEC has supplied to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to your inquiry. Tedpfof Rt Ubjx Abvsc