Mesin amplas sabuk lebar

SANDINGMASTER 3000 SA-3200-1100

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Fodpjgtm U Ajfx Am Sjgc Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: baru, Tahun pembuatan: 2026, panjang total: 1.450 mm, lebar total: 800 mm, tinggi total: 1.800 mm, berat keseluruhan: 500 kg, daya: 4,75 kW (6,46 hp), FC 120 ZK Working capacity Ø 120x120 mm, Number of belt stations (Z): 1, Number of brush stations (K): 1, Abrasive belt dimensions: 120x1850 mm, Brush band dimensions: 120xØ200 mm, Abrasive belt speed: 20 m/s, Brush band speed: 15 m/s, Feed speed: 12 m/s, Abrasive belt motor per head (x1): 3 kW, Brush motor per head (x1): 1.5 kW, Fgsdpfx Aot D D Nzom Soc Feed motor: 0.25 kW, Total power: 4.75 kW, Power consumption: 12A, Extraction port per head Ø (2x): 80 mm, Dimensions: 1450x800x1800 mm, Weight: 500 kg

Kondisi: baru, Diameter 150 mm Workpiece length 1300 mm Workpiece width 800 mm Max. grinding wheel diameter 150 mm Fodpfxsxab Hpo Am Segc Speed range 0 – 2830 rpm Working height 945 mm Head swivels +/- 180° Motor power 1.5 kW Machine weight approx. 230 kg Space requirement approx. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to conventional grinding and deburring machines. Its head, consisting of a grinding wheel and a flap brush, can be swiveled 180°. This allows for rapid switching between the two units. The counterweighted arm enables the head to move smoothly over the workpiece, resulting in consistent edge rounding. The worktable prevents even the smallest components from slipping. Equipment: - Deburring and rounding of laser-cut or punched sheet metal parts - Grinding head consisting of a grinding wheel & flap brush - Grinding head assemblies swiveling up to 180° - Working area 800 x 1300 mm - Counterweighted arm for easy swiveling - Non-slip table surface - Ergonomic machine operation via on/off pushbuttons - Grinding head with stepless speed control via frequency inverter - Ergonomic handle for easy operation

Kondisi: baik (bekas), 0136 Marke: ITALPRESSE Modell: FORMATIC 20.9 Hydraulische Membranpresse Beidseitige Beschichtung von Furnier auf Platten, die auf einer Seite profiliert oder geformt und auf der anderen flach sind, zur Herstellung von Kassettenfronten, Schubladenfronten, Schreibtischplatten, Tischplatten, Küchenarbeitsplatten usw. 3D-Beschichtung von Kunststofffolien (PVC, PPE, ABS, Transferfolie) auf Platten, die auf einer Seite profiliert oder geformt sind, für die Herstellung von: Möbelfronten, Schubladenfronten, Schreibtischplatten, Tischplatten, Küchenarbeitsplatten, Ladeneinrichtungskomponenten, Zimmertüren usw. Fodpfjpbvqvjx Am Sjgc Plattengröße mm: 2000 x 900 Lichte Weite mm: 325 Zylinderhub mm: 325 Heizung (Elektrokessel): 27 kW Presskraft: 300 t Anzahl Presszylinder: 3 Hydraulikaggregat Leistung: 5,5 kW Druckregulierung mittels Manometer Automatische Druckrückstellung Öffnungszeitsteuerung Abmessungen (LxBxH) mm: 3300 x 1400 x 2400 Gewicht: 8.100 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, en-GB Fsdpjgi Dryofx Am Segc

Kondisi: belum diuji (bekas), Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Used Weinig Unicontrol 6 window manufacturing line ----- For sale on behalf of a customer Manufacturer's description: For the production of individual components, elements, and small batches. Spindle arrangement: One cross-cut saw, one single-sided tenoning and slot spindle, one right-hand profiling spindle, one tenoning-slot spindle, and one profiling spindle suitable for stacking multiple tools on top of each other, equipped with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer into the continuous, chainless rubber roller feed of the profiling unit, feed height adjustment is manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash outer dimension. Position control of the tools (longitudinal and cross machining) via rotary selector switch from the control panel. Technical specifications ----- Cross-Cut Saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor: 3 kW Tenoning and slot spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 320 mm Motor: 11 kW Fgodpex Tu N Hjfx Am Sjc Profiling spindle ----- Number of tools: 3/4 pcs. for timber thickness IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Maximum tool diameter: 232 mm Motor: 11 kW Special equipment: Co-rotating spindle ----- Pneumatically actuated for splinter-free rebating of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, tool zero diameter: 112-140 mm, Maximum tool diameter: 232 mm, spindle speed: 6,000 rpm Motor upgrade for co-rotating spindle from 4 kW to 7.5 kW Monitor-based control for 99 window types, 1 type can contain up to 8 different parts, each with 2 end profiles and 2 longitudinal profiles. Production options: single parts, double parts, frame mode, series mode, rebating. Data entry via keypad with integrated operator guidance and fault diagnosis. 1 grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with keyway 10 x 4 mm Clamping length: 13 mm Clamping length: 40 mm Axial positions: 2 Radial positions: 2 Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 to 3 kW 1 hardware milling unit, right: ----- For routing the hardware groove during rebating or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool circle diameter: min. 140 mm, max. 180 mm Home position under table surface: 10 mm Hardware router in special design: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial positions: 2 Motor upgrade for hardware milling spindle from 2.2 to 3 kW Hardware milling spindle for 230 mm tool diameter both in and above the table Electric height adjustment of the feed with selector switch on the control panel for 2 wood dimensions, including...

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, 1. CNE 1965 1300€ 2. CNE 1970 1400€ 3. CNE 1970 1400€ 4. CNG 1970 1100€ 5. CNS 1957 800€ 6. CNL 1970 800€ 7. CNG 1972 1100€ 8. CNE 1968 1400€ 9. CNS 1975 1600€ 10. CNE 1966 1300€ 11. CMS 1959 800€ 12. CNS 1955 800€ 13. CNE 1969 1400€ Fgodpfx Amswb Smlo Ssc 14. CNE 1968 1400€ 15. CNH 1970 2400€

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Nice machine in good condition, as it comes from a small business and has seen little use. Includes IV 68 tool. Still available for demonstration in operation. Fsdpfx Amou S Afce Sogc

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, berat keseluruhan: 100 kg, tinggi total: 1.000 mm, warna: merah, tekanan operasi terus-menerus: 210 batang, torsi spindel (maks.): 1.800 Nm, Perlengkapan: hidrolik, Kegel splitter / Excavator log splitter / Drill cone splitter / Log splitter KS5 Drill Cone 200x400 – Made in Germany Fodpfxjuph Uxo Am Segc The powerful cone splitter for attachment to mini excavators, excavators, wheel loaders, tractors, forestry trailers, and many other applications. The drill cone can be exchanged for various tools such as a root cutter, earth auger, humus sieve, concrete mixing drum, weed brush, and many other attachments. The cone splitter consists of a highly robust drive unit and the drill cone (splitting cone). The drill cone is fully hardened – not made from unhardened steel like many other manufacturers. It can be converted to other tools in just a few easy steps. • Cone splitter • Root cutter • Earth auger • Weed brush • Sweeper • Power harrow NO CHINESE IMPORTS! WE MANUFACTURE IN GERMANY! THE ideal multipurpose tool for forestry professionals, farmers, landscaping, DIYers, and professionals. Total length 600 mm plus attachment and change system Universally usable in construction, forestry, agriculture, and landscaping For splitting thick firewood or wood for wood chips For drilling earth holes for posts, planting, and much more For removing rootstocks and tree stumps For cleaning ditches and paved surfaces For leveling garden areas and creating a fine soil structure Operate easily from the excavator without additional help. The extremely solid and stable steel construction enables tough and long-lasting use. The shaft is additionally supported, along with the motor, by two heavy-duty tapered roller bearings for both thrust and radial loads. The roller bearings are greaseable for extended service life. A powerful HMT 500 hydraulic motor delivers up to 1,800 Nm torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure. Weight: 70 kg Including: • Drive unit with high-performance HMT hydraulic motor, weight 70 kg • Drill cone with tip Ø 200 mm, 270 mm/400 mm length, front face with 6x M16 threads LK173 Total length: 270 mm + drill cone tip 130 mm = 400 mm Diameter: 200 mm Weight: 30 kg Total weight: 100 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1993, nomor mesin/kendaraan: 869/9-302, Fungsionalitas: berfungsi sepenuhnya, Connected load 380V 21A Edge magazine Glue station 1906 Pressure unit 1914 Cross-cut saw unit 1976 Rounding milling unit 1943 Rounding profile scraper 1927 Buffing unit 1944 Control panel top Fgodpfx Aeiamufjm Soc Extraction port D=100 mm Operating manual No interchangeable unit for flush milling