Pers eksentrik - kolom tunggal

SANGIACOMO T 20 CE

Kondisi: baru, Tahun pembuatan: 2024, 20 t pressing force Outreach: 155 mm Stroke: 6–60 mm Stroke rate: 84–210 strokes/min Ram adjustment: 50 mm Installation height (with ram adjustment at top): 300 mm Table surface: 300 x 450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Ram surface: 190 x 278 mm Cpodevfhqispfx Abheu Pin bore in ram: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Space requirement (LxWxH): approx. 1100 x 1100 x 1900 mm Machine number: 16144 LED machine lamp Stroke rate frequency-controlled Sick light barrier for protection and cycle operation 4x programmable electronic cams 4x freely programmable tool safeties Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading/unloading operations

Kondisi: baik (bekas), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Horizontal throat depth (steady arm): 670 mm Vertical throat depth (steady arm): 940 mm Cylinder stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Cpsdpokvnumjfx Abhju Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Therefore, these details do not represent warranty or binding contractual terms. We recommend verifying all critical details.

Kondisi: baru, Tahun pembuatan: 2024, Pressure: 20 t Reach: 155 mm Stroke: 6–60 mm Strokes per minute: 84–210 spm Ram adjustment: 50 mm Installation height at top, ram adjustment at top: 300 mm Table size: 300 x 450 mm Table height: 840 mm Through-hole in table: Ø 90 mm Ram surface: 190 x 278 mm Ram bore: Ø 25 mm Total power requirement: 1.5 kW Machine weight approx.: 1.0 t Space requirements approx. (W x D x H): 1100 x 1100 x 1900 mm Machine number: 16145 LED machine lamp Stroke frequency control (frequency regulated) Sick light barrier for protection and cycle operation 4x freely programmable electronic cams 4x freely programmable tool locks Machine feet Two-hand operation Foot operation Cpsdpfx Absvfhp Eehou Central lubrication system Pneumatic clutch/brake combination Approved for manual part loading

Kondisi: baru, Tahun pembuatan: 2024, Pressing force: 20 t Outreach: 155 mm Stroke: 6-60 mm Stroke rate: 84-210 strokes/min Ram adjustment: 50 mm Cjdpfxovfhp Se Abhopu Installation height, top, ram adjustment at top: 300 mm Table surface: 300x450 mm Table height: 840 mm Pass-through opening in table: Ø 90 mm Ram area: 190x278 mm Pin hole in ram: Ø 25 mm Total connected load: 1.5 kW Machine weight approx.: 1.0 t Required space approx. (WxDxH): 1100x1100x1900 mm Machine number: 16146 LED machine lamp Frequency-controlled stroke rate Sick light curtain for safety and cycle operation 4x freely programmable electronic cams 4x freely programmable tool safeguarding modules Machine feet Two-hand operation Foot operation Central lubrication Pneumatic clutch-brake combination Approved for manual loading operations

Kondisi: bekas, nomor mesin/kendaraan: 4131, Order no. Lg 34422 High-performance punching press BRUDERER BSTA 60 H from ongoing production. Stroke adjustment requires repair. Without soundproof enclosure and without coil feed line. Cpjdpfxeinzdls Abhou Feed unit BBV 202/120

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 410 mm, jarak gerak sumbu Z: 450 mm, model controller: Heidenhain, kecepatan rotasi (maks.): 12.000 rpm, Vertical Machining Center YCM NXV600A - Demonstration Machine - Control: Heidenhain TNC620 Spindle: 12,000 rpm, SK40, 17 kW Coolant system with 20 bar through-spindle coolant (IKZ) Handwheel Tool changer: 24 stations Chip conveyor Cpsdjvvuh Aepfx Abhou The machine is located at our site in Soltau and can be inspected under power at any time!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Large, semi-automated Polar 137 XT-Autotrim Pace cutting line with stack lift, jogging system with counting scale, gripper transport system, turning gripper, and unloader Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed in the jogger by the operator, jogged, and then transferred by the Autotrans gripper system from behind the jogger onto the rear table of the high-speed cutter and rotated as needed. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing cutting to continue simultaneously. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1,200 kg Equipped with continuously adjustable photoelectric sensors for automatic lifting or lowering. Jogging System RAH-4 with air-removal roller and rear-table discharge Working size up to 75 x 105 cm The jogged material is automatically discharged to the rear into the STR stacking rack. The Autotrans gripper transport system then takes over layer transport to the rear table of the high-speed cutter. Sheet scale – Polar counting scale Avery Weigh-Tronix For creating precisely counted cutting batches Gripper transport system POLAR Autoturn – clamp transport to rear-table loading and rotary gripper takes over the prepared cutting batch from the stacking rack or buffer table. Via air tables, which optimize the conveying process via an air cushion, the material is transported directly onto the rear table of the high-speed cutter and placed precisely in position. Csdpfx Asxd U Saobhepu During transport, the cutting batch is held firmly by the grips, ensuring the batches remain perfectly square and aligned, even when pre-aligned, during transfer. Polar 137 XT-AT cutting machine with touch operation and Autotrim function for automatic trim waste removal beneath the front table. - Lowerable side gauge left (required for rear table loading), also allows formats with a diagonal of

Kondisi: baru, Pressure: 25 t Reach: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Strokes per minute: 160 spm Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Pass-through opening in the table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight: approx. 1.9 t Space requirement: approx. 1.3 x 1.0 x 1.85 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff Cpodpfjb U Hwpsx Abhou - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Kondisi: baru, Pressure: 40 t Reach: 225 mm Stroke: 8–84 mm Table size: 580 x 450 mm Ram adjustment: 55 mm Stroke rate: 130 strokes/min Ram area: 185 x 180 mm Ram bore: 40 H7 mm Pass-through opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Cjdpfx Abjb U Hwtehepu Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space required approx.: 1.4 x 1.1 x 2.1 m - Hydraulic clutch-brake combination - Central lubrication system by Vogel - Cam controller by Balluff - Control cabinet with touchscreen - Height-adjustable table - Foot switch

Kondisi: baik (bekas), Wohlenberg 132 TS Papier-Schneidemaschine Maschine in sehr gutem Zustand, sofort einsatzbereit für die Produktion. Baujahr: 2008. Sofort ab Lager verfügbar. Die Guillotine kann als Einzelgerät oder in integrierten Schneidesystemen eingesetzt werden. Die Programmgenerierung erfolgt über das Menü und umfasst verschiedene Schneidaufgaben, z.B. Einzelschnitt, Programmierung, Mehrfachschnitt, Druck ohne Schneiden, automatische Istwertübernahme. Schneidemaschinen der Premiumklasse der Marke Wohlenberg werden in Solms, Deutschland hergestellt. Besondere Merkmale der Wohlenberg-Maschine: – Interaktive Benutzeroberfläche – 18,4” Touchscreen – MIS-Integration (optional) – USB-Schnittstelle – Ethernet-Schnittstelle – Windows CE Betriebssystem – CIP-Datenmodul – Positionierung über elektronisches Handrad – Optimierter Schneidzyklus – Programmierbarer Pressbalkendruck – Automatische Anpassung des Pressbalkendrucks an die Schnittbreite – Automatisierter Messeraustausch von vorne – Schnellwechsel-Messer – Neuer Maschinenkörper aus einem Guss = höhere Stabilität – Wartungsfreie elektromagnetische Kupplung Cpsdow D E Saspfx Abhou Technische Daten: Schnittlänge: 1.320 mm Maximale Stapelhöhe: 165 mm Einlegetiefe: 1.325 mm Kleinster Schnitt mit Unterblech: 77 mm Kleinster Schnitt ohne Unterblech: 20 mm Maximale Vorschubgeschwindigkeit des Tisches: 300 mm/s Maximale mechanische Messerleistung: 44 Hübe/min Tischführung: oberhalb des Arbeitstisches Hauptmotorleistung: 4,5 kW Eigengewicht: 3.410 kg Die Maschine ist ausgestattet mit Ersatzmesser, Andrückleisten, Druckplatte, Dokumentation und Werkzeugen.