Pers eksentrik - kolom tunggal

SANGIACOMO T 30 CE

Kondisi: baru, Tahun pembuatan: 2024, Press force: 30 t Outreach: 180 mm Stroke: 8-76 mm Strokes per minute: 80-200 spm Ram adjustment: 60 mm Table size: 360x580 mm Table height: 840 mm Pass-through hole in table: Ø 110 mm Ram area: 250x350 mm Pgsdpfx Asvfhqvjdiep Ram bore: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Required space approx. (WxDxH): 1350x1200x2100 mm Machine number: 16148 LED machine lamp Stroke rate frequency controlled Sick light barrier for safety and automatic operation 4x electronic cams, freely programmable 4x tool monitoring, freely programmable Machine feet Two-hand control Foot pedal control Central lubrication Mechanical overload (shear) plate in ram Pneumatic clutch-brake combination Approved for manual loading/operation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Engel Victory 80/45 Tech Clamp force: 45 tons, tie-bar-less Pjdpfxoh Rawbe Adisgp Screw diameter: 22 mm Year of manufacture: 2004 Control unit: CC 200

Tahun pembuatan: 2023, Kondisi: baru, Pressure: 30 t Throat depth: 180 mm Stroke: 8–76 mm Strokes per minute: 80–200 spm Ram adjustment: 60 mm Table surface: 360 x 580 mm Table height: 840 mm Through-hole in table: Ø 110 mm Ram surface: 250 x 350 mm Ram bore: Ø 40 mm Total power requirement: 3 kW Machine weight approx.: 1.8 t Space requirement approx. (WxDxH): 1350 x 1200 x 2100 mm Machine number: 16051 LED machine lamp Variable stroke rate, frequency-controlled Sick light barrier for safety and automatic operation 4x freely programmable electronic cams 4x freely programmable tool safety devices Machine feet Two-hand control Foot pedal control Centralized lubrication Mechanical rupture disc in the ram Pneumatic clutch-brake combination Pgjdpfxep Uduhe Adijp Approved for hand-feeding operations

Kondisi: baru, Tahun pembuatan: 2024, Pressure: 30 t Outreach: 180 mm Stroke: 8–76 mm Strokes per minute: 80–200 spm Ram adjustment: 60 mm Table size: 360 x 580 mm Table height: 840 mm Table through-hole diameter: 110 mm Ram surface: 250 x 350 mm Pin hole in ram diameter: 40 mm Total power requirement: 3 kW Pgodpfx Asvfhq Aedisp Machine weight approx.: 1.8 t Required floor space (WxDxH): approx. 1350 x 1200 x 2100 mm Machine number: 16149 LED machine lamp Stroke frequency controlled by inverter Sick light curtain for protection and automatic cycle mode 4x freely programmable electronic cams 4x freely programmable tool safety controls Machine feet Two-hand operation Foot operation Centralized lubrication Mechanical rupture plate in ram Pneumatic clutch-brake combination Approved for manual loading operations

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height: from 95 to 240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force over the entire stroke length. They are primarily used when processing long-stroke parts with consistent force is required. Convincing technology: • Long and precise spindle guidance ensures maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings on the piston for smooth and consistent running • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against twisting • For the PND 85/S, spindle return is effected via only one cylinder chamber—providing additional air savings • Working height fine adjustment is simple, quick and precise in 2 stages: – Basic adjustment by loosening the clamping screws on the stand – Precision fine adjustment via the stroke limit ring on the piston rod Additional advantage: Faster cycle times and air savings. Pgsdpjfv Awaofx Adisp

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure Pgedpfx Adsuiy Hreisp - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, nomor mesin/kendaraan: PM_1000, Used polishing machine for manual processing. Drive power: 5.5 kW Polishing discs diameter: 1000 mm Pgodpfefiugujx Adisp

Kondisi: baik (bekas), Tahun pembuatan: 2008, Sawing capacity round: 115 mm Max. saw blade diameter: 350 mm Sawing capacity rectangular: 200 x 70 mm Sawing capacity square: 105 x 105 mm Sawing unit power: 6.5/8 kW Speed on sawing shaft: 1700/3400 rpm Maximum feed length: 9999 mm Shortest feed length: 10 mm Weight: 2300 kg Equipment: BEHRINGER SPS control Micro lubrication system Controlled zero point Cutting gap extension Machine light Vertical main clamping Non-return device Extraction system prepared (Keller extraction unit not included) Pgedpfxerz Rw Re Adisp Roller conveyor infeed approx. 5000 mm, self-made

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Engel ES 330/80 HLS Clamping force: 80 tons Year of manufacture: 1998 Screw diameter: 35 mm Shot volume: 154 cm³ Enlarged mounting platen: 660 x 560 mm Minimum mold height: 200 mm Pedpfx Ajpdr Aiediegp

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Pgodpsuiy Ngefx Adijp Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training