Ruang peledakan untuk komponen industri berat

SAPI GMBH Sandstrahlanlage Großraum-Sandstrahlhalle für Industrie

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm Ijdehzbipjpfx Afisar DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baru, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! Straightening Press 150 tons with electric motor and additional manual hand operation via lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a custom press according to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode using a lever to raise and lower it. For precision tasks (e.g., pressing bearings, straightening, etc.), the press also features a manual hand pump, allowing you to finely adjust the force manually. The pressure cylinder is mounted on a sliding carriage, which allows it to be laterally shifted. This enables you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Pull chains for easy height adjustment - Heavy-duty machine frame - Laterally adjustable cylinder (mounted on sliding carriage) The press can be tested under power at our location. Iaedpfx Asf Sqcksfijr ----- Numerous other workshop presses available in various designs, sizes, and with optional additional equipment! 30, 60, 100, 150, 180, 200 tons. ----- Simply contact us for a non-binding consultation. The stated price is net, plus 19% VAT. All information provided without guarantee. Europe-wide delivery possible! ----- The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place through telecommunications (email, fax, phone, messaging portal). We will first provide you with a non-binding offer, which will include our general terms and conditions and cancellation policy with company information, prior to purchase or conclusion of contract.

Kondisi: baik (bekas), Plant: REWA Chamber Filter Press Used Model: 470-15-25K-HP Ijdpfx Aoqakbrefijar Design: Side beam guided Filter plate size: 470 x 470 mm Number of plates: 15 Filter plates: PP Filter cloths: optionally available, tailored to the medium Chamber volume: approx. 57 dm³ Filtration pressure: approx. 15 bar Material (wetted parts): flanges and thru-rods stainless steel, PP or rubber-coated Material (non-wetted parts): stainless steel Purchase or Rental: Systems can be inspected at our facility by appointment. Miscellaneous: We supply the plant either used and operational, or refurbished and customized according to your requirements. Interested in buying or renting this unit? Please contact us – we will be happy to assist you.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. Isdpfx Aspugwijfisar The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Tahun pembuatan: 2022, Kondisi: baru, Payload capacity: 10,000 kg Rotational speed: 0.03 - 1.6 rpm Iodpfsfxgp Uex Afioar Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transfer: 800 A

Kondisi: baru, DM100 Z2C – carries out edge rounding and removes sharp burrs from both internal and external edges of steel, stainless steel or aluminum parts after laser, shear or punch cutting, for metal parts ranging from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore hardness) using an abrasive belt, efficiently removing heavy burrs in the initial step. The second station processes the products with two pairs of counter-rotating cross belts—one from below and one from above. The cross belts round off both internal and external edges of the workpieces. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Specifications – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Iasdpsd Ixadefx Afior Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150+185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Kondisi: bekas, LOSER chamfering machine / dowel trimmer model AA220 - USED Iaedpfeqpdkcox Afisr - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm.

Tahun pembuatan: 2025, Kondisi: baru, en Iedpfx Asghf R Uefisar

Kondisi: baru, The Jantar is the most popular model in the Eckert machinery lineup, valued for its dynamic performance and efficiency. It is widely used by both large industrial enterprises and medium-sized companies seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems, as well as a range of extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s construction has been optimized over years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Key Features • Attractive pricing for a well-equipped base version • High-dynamic, precise cutting for 2D applications, pipes, and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Extensive database with predefined cutting parameters • Option to flexibly extend the length of the working area Technical Data Drive AC Servo Available Working Widths 1,500; 2,000; 2,500; 3,000 mm Available Working Lengths Any length starting from 1,500 mm Positioning Speed 25,000 mm/min Cutting Thickness up to 100 mm Cutting Quality DIN-EN ISO 9013 Positioning Accuracy DIN-EN 28206 Repeatability DIN-EN 28206 Electrical Systems DIN-EN 81346 Ijdpsf Alb Aefx Afioar Safety Module DIN-EN 13850 Working Height 740-760 mm Operating Temperature +5 °C to 45 °C Operating Humidity max. 90%

Kondisi: baru, Table length: 1200 mm Table width: 1200 mm Table height: 840 - 890 mm Machine weight: approx. 0.32 t Iajdpfxspk Iv Ue Afior Welding Table / Perforated Table: Hole diameter: 28 mm The table is made from 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels: 165 mm Height adjustable from approx. 840 - 890 mm Underside ribbed for reinforcement. Including floor bearing Accessories optional!! Surface flatness: 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck not included in the scope of delivery.