Input getaran untuk accessorie furnitur

SARG TRT - 200 LT

Kondisi: bekas, LOSER chamfering machine / dowel trimmer model AA220 - USED - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm. Cedpoqpdkcjfx Aa Tepw

Kondisi: hampir baru (bekas), Inline folie-sealmachine en krimptunnel Merk: Kallfass Codpfeg D Nv Tox Aa Tepw Type: Semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Bereik: 1600 (transportband) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V+N+PE, 65 kW Staat: In huidige staat, werkend

Kondisi: bekas, Tahun pembuatan: 2013, Overview The Heuft InLine IR – High-Speed Empty Bottle Inspector is distinguished by its compact installation dimensions. High-speed inspection of empty bottles is easily achievable (up to 50,000 bottles/h). It is capable of performing all standard inspections (sidewall inspection, infeed inspection, finish inspection, base inspection, outfeed inspection, HF caustic and IR residual liquid detection). Additionally, it features a separate module for foreign bottle detection (height, contour, color). In 2016, it was overhauled and modified, including the integration of conveyor control. Technical Data: - Capacity: 5,000 – 50,000 bottles / h - Compact installation dimensions Csdpjukafrofx Aa Topw - Overhauled and modified in 2016 Features: - Performs all standard inspections: sidewall, infeed, finish, base, outfeed, HF caustic, and IR residual liquid detection - Separate module for foreign bottle detection (height, contour, color)

Kondisi: sangat baik (bekas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Cpjdpfx Aaohv Stts Tew Loader

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Monoblock Bottling Machine STORK VS 24/8 after a complete overhaul performed by the professional company Z.M. ROBAK. The machine shows virtually no signs of use; the protective foil is still on the housing. The machine is currently set up for filling glass containers – it has been test-run for bottling alcohol. Number of filling valves: 24 pcs (with light vacuum for still beverages) Number of capping heads: 8 pcs (prepared for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Possible bottle formats (after adjusting for specific formats): - Diameter: 45 mm – 110 mm - Height: 105 mm – 400 mm - Standard neck diameter: 28 mm - Optional neck diameter for format change: 18 mm – 43 mm Cpodpfx Aaju Nhiqe Tjw Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture / overhaul: 2018 – not used in production since overhaul Condition: Machine is virtually unused. The machine comes with original electrical documentation.

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Cjdpfx Ajuc Idxoa Topw Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels

Tahun pembuatan: 2009, Kondisi: bekas, Scanvaegt RF5 Kontrollwaage, Seriennummer: BMP01014, Baujahr 2009. Edelstahlrahmen, Wägebereich 600 g bis 5000 g, Leistung bis zu 40 Packungen pro Minute. Maximale Produktabmessungen: 300 mm x 220 mm, Gesamtlänge: 800 mm. Cpjdpfxjdqapds Aa Tow

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Kaum gebrauchte UV-Linie für Platten oder Fußböden Cedpfx Aajv Ux R Se Tspw

Kondisi: bekas, Tahun pembuatan: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing: Due to its vertical orientation, this machine series is by far the most flexible and productive machine at a very high quality level. In addition, the automatic return/rotation system for the panel enables fully automatic operation. The machine can process all 6 sides of a panel up to a height of 1300 mm. Csdel Ikzgopfx Aa Tepw Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system using a PC with TPA Albatros software. The programming editor with high-level software interface enables simple and intuitive programming of the machine and also supports: * Linear, circular, and spiral interpolation * Double zero point * Mirror program management * Tool diameter optimizer for turret tools * Optimizer for independent spindle diameter * DXF file conversion (geometric conversion) * Import of work lists in ASCII format * Extra key for programming from the office * Barcode reader for tools * 17-inch LCD monitor * Professional operating system: Windows 7 Panel feeding and handling is managed via motorized vertical transfer with rollers and rubber-coated pressers to clamp the panel during processing; the motorized conveyor is 2000 mm long with electronically adjustable speed via inverter control. Photocells and the NC program ensure the introduction of one or more panels in sequence with selector selection. Height reading system for the panels consisting of an independent axis that can read the panel height before entering the machine. Reading tolerance of the dimension +/- 0.15 mm; if tolerance is exceeded, an alert is issued and the machine stops the current operation. System for reading panel thickness with a mechanical probe. Horizontal vice – M.O. axis: allows thickness of the workpiece to be measured by the program. Vertical vice – M.V. axis: allows the program to measure the height dimensions of the workpiece to be machined. Chain – X axis – patented double section with laser photocells that can read the reference zero point before performing operations. The double section allows processing on the underside of the panel, allowing machining on all 6 sides. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm: 24 independent spindles with a 32 mm pitch, arranged as follows: * 7 spindles aligned on the X axis * 17 spindles aligned on the Y axis Unit driven by a high-frequency motor enabling spindle rotation speed changes up to 7000 rpm. The brushless motor allows control of drilling depth and feed rate. Upper turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct drive transmission to the tool up to 18,000 rpm. The rotation of the turret is performed by a controlled axis with a brushless motor, enabling...

Kondisi: baru, de Cpjden Nv S Tjpfx Aa Tow