Axial compensator

SB Broneske SBF25.050

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, Bsdjfz U S Ejpfx An Heww This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Bodei Dfidepfx An Howw Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Cutting capacity at 90°: round 500 mm Cutting capacity at 90°: square 420 mm Cutting capacity at 90°: rectangular 600x400 mm Saw band dimensions: 5320 x 34 x 1.1 mm Band speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double mitre band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Mitre cuts left & right up to 60° • Frequency-controlled saw drive • 34 mm saw band height • Wear-free, ball-bearing supported rotary material table • Saw band guides adjustable via extra-wide linear guide • Heavy-duty, robust gearbox • Large clamping plates Bodpjupxupjfx An Hjww • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Freestanding, safe, and ergonomic control panel • Storage space for bands and consumables • Hydraulic cutting pressure regulator valve • Material height sensor (automatic cut start detection) • Ultra-fast clamping (front loading) • Hydraulic control for saw frame and vice • LEDs to monitor all safety functions • Minimum cutting capacity, round, from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw operation 3. Rapid downfeed to material or, for serial cuts, start cutting directly 4. Stop saw band 5. Raise frame just above material 6. Open vice

Kondisi: baik (bekas), Robland thickness planer 3 Tersa knives 1 feed speed for thicknessing Thicknessing height: 230 mm Noise-dampening combs in the table Bjdpevyhmgofx An Hsww Table length: 140 cm Machine is operational and ready for work

Kondisi: baru, Description Work table made of heavily ribbed grey cast iron and base frame made of welded steel ensure torsional rigidity and vibration-free operation. Unique in its performance class: sliding table made of anodised aluminium for maximum cutting precision. Cutting line directly at the saw blade. Tilting saw blade from 90° - 45°. Crosscut frame with aluminium length stop and adjustable stop jaw for panels and large workpieces. Cutter guard for profiling. Two independent motors for each working unit. TECHNICAL DATA Dimensions and Weights Weight (net): approx. 190 kg Dust Extraction Connection Extraction port diameter: 120 mm Bedpfxevwfqwo An Howw Extraction port diameter (saw blade guard): 60 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Rated operating mode main motor: S6 Duty cycle main motor: 40 % Motor power: 2 x 1.8 kW Sliding Table and Table Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Table length: 1040 mm Table width: 224 mm Spindle Moulder Spindle shaft diameter: 30 mm Usable spindle length: 75 mm Spindle speeds: 5000 / 7500 rpm Max. Tool Diameter for Spindle Moulder Max. tool diameter: 160 mm Max. tenoning diameter: 200 mm Circular Saw Unit Rip length: 1200 mm Cutting width with rip fence: 700 mm Max. crosscut width left of the saw blade: 1200 mm Saw blade tilt: 90–45° Max. cutting height at 90°: 75 mm Max. cutting height at 45°: 60 mm Max. saw blade projection at 90°: 67 mm Max. saw blade projection at 45°: 40 mm (Main) saw blade diameter: 250 mm (Main) saw blade speed: 4000 rpm Equipment Anodised aluminium sliding table Crosscut frame with angle-adjustable length stop, flip stop, and degree scale Rip fence Eccentric clamp Table extension Milling fence with wooden jaws Manual spindle height adjustment Manual saw blade height adjustment Manual saw blade tilt adjustment

Kondisi: baik (bekas), Power amplifier, servo motor controller, power controller, thyristor power controller, thyristor controller, power regulator Bwjdpeubfyhefx An Hew - Manufacturer: Gefran, power controller/power regulator - Model: GTF-25-480 - Quantity: 5 power controllers available - Price: per unit - Dimensions: 150/60/H135 mm - Weight: 0.9 kg/unit

Kondisi: baru, - NEW - Description Cutting level directly at the saw blade Bwedpfx Anjvyuqfo Hjw Heavy-duty grey cast iron steel construction Precision-guided aluminium sliding table, standard anodized finish Large support table guided on telescopic arm and adjustable lengthwise Extendable aluminium telescopic fence with professional flip stops, angle adjustable Parallel fence with quick clamping and fine adjustment Large worktable made from milled grey cast iron remains permanently flat Standard table extension and table widening enable easy handling of large workpieces Smooth operation and precise cuts Equipped with a powerful three-phase motor The large-size saw unit made of cast iron is double-mounted on the table, guaranteeing stability, precision, quiet operation, and long service life Maximum cutting height is achieved even with a scoring unit installed Equipment details: Double-trunnion saw unit - Large size, made of steel/cast iron - Positioned close to the saw blade, mounted on both sides for precision, smooth running, and durability - Height and tilt adjustable up to 45° via hand crank - Maximum cutting height even with scoring unit installed - Also available with scoring unit Telescopic fence - Extendable telescopic fence up to a max. of 2550 mm - Angle adjustable - With professional flip stops Aluminium sliding table - Proven ball contact system - Resistant to dust and dirt due to minimal contact point between ball and trapezoidal rail - 10-year Holzkraft warranty on guideway wear Parallel fence with round bar guide - With fine adjustment and quick clamping - Sturdy round bar guide made of ground steel, 45 mm diameter - Standard fold-down feature for cutting large workpieces Technical data: Dimensions and weights Weight (net) approx. 380 kg Dust extraction connection Extraction port diameter 120 mm Extraction port diameter saw blade guard 60 mm Machine body length 1388 mm Working area length 1000 mm Machine body width/depth 689 mm Working area width/depth 2000 mm Required space length 5118 mm Required space width/depth 3830 mm Electrical data Connection voltage 400 V Drive motor power 5.0 kW Phase(s) 3 Ph Rated operating mode S6 Current type AC Duty cycle drive motor 40 % Mains frequency 50 Hz Sliding table and worktable Sliding table length 2250 mm Table length 840 mm Sliding table width 270 mm Table width 560 mm Sliding table height 124 mm Table height 900 mm Circular saw unit Cutting width with parallel fence 900 mm Max. cutting height 90° 90 mm Max. crosscut width left of saw blade 2310 mm Max. cutting height 45° 63 mm Edging length 2250 mm Saw blade diameter 315 mm Saw blade tilting 90 - 45° Saw blade speed 4000 rpm Art. No. 5504323

Kondisi: seperti baru (mesin pameran), FOR SALE: DEMONSTRATION MACHINE We are offering for sale an as-new HAGER HDE-59 BIG woodturning lathe with a centre distance of 1,000 mm. The exhibition machine is in original condition, so you receive the full warranty. Technical specifications: - Motor: 2.2 kW / 3 HP / 400 V - Speed ranges: 100–450 rpm 300–1,100 rpm 750–2,700 rpm - Centre height: 250 mm - Centre distance: 1,000 mm - Tool rest: 350 mm - Spindle rotation direction switch - Spindle M33 x 3.5 mm with ASR (Euro) anti-rollback groove - Spindle and tailstock tapers: MK3 (Morse Taper 3) - Hollow spindle, diameter: 20 mm - Main spindle supported by 4 bearings - Tailstock quill travel: 150 mm (with scale) - Overall length: 1,780 mm - Weight: 235 kg The machine is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Bwedpfetpnddox An How If you are interested in this machine, please provide your complete address details via the contact form so we can process your enquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning lathe, lathe machine, lathe, wood lathe, woodturning, turning chisel, wood turning, turning, machine, Hager Reference: R-A0117

Kondisi: baru, Tahun pembuatan: 2024, daya: 1,2 kW (1,63 hp), EN_SCHORR_Electric_Stacker_RR15HH450E_Free_Lift Bodpfx Ajqwdltjn Heww SCHORR ELECTRIC HIGH-LIFT STACKER PRO 1500KG LOAD CAPACITY 5M LIFT HEIGHT RR15HH450E FREE LIFT Powerful professional-grade equipment with a lifting capacity of up to 1500 kg ✅ Reaches a lift height of 5 m ✅ Free lift: Mast only extends above mast frame height—ideal for low ceiling applications ✅ Robust triplex mast & heavy-duty chassis ✅ On-board charger included ✅ Equipped with high-performance 24V 200Ah lead-acid batteries ✅ Digital battery status indicator & hour meter ✅ Small turning radius of only 1,575 mm—ideal for confined workspaces EQUIPMENT / FEATURES Robust and high-quality design Thanks to its rugged and stable construction, the stacker ensures maximum stability and durability. With a capacity of 1,500 kg, this stacker is a real powerhouse, capable of smoothly raising heavy loads to a height of 5 metres. Free lift feature: Featuring a full free lift function, this stacker is especially suitable for warehouses and areas with low ceilings and restricted access height. The triplex mast only extends above the mast frame (1,570 mm), ensuring safe and efficient operation in tight spaces. Combined with a 5 m lift height, this unit is an all-round solution. Charger included: The integrated 24V lead-acid battery with a capacity of 200Ah ensures long operating times. The electric stacker can be recharged via the supplied charger using any standard 230V socket. Easy operation: The stacker is user-friendly and features a high-quality, waterproof control interface, allowing for short-term use in damp or cool areas. All controls—including the battery status indicator, emergency stop, and key switch—are ergonomically arranged for direct operator access. With a compact turning radius of just 1,575 mm, this electric stacker is extremely agile and highly maneuverable. Multiple driving modes: Thanks to various driving modes, the SCHORR stacker is extremely versatile and easily adapts to user requirements. In addition to a standard transport speed of approx. 5.8 km/h, it offers a "creep mode" for slow, precise movements—ideal for navigating narrow aisles and racking. Technical Data Manufacturer (Abbreviation): SCHORR Model Code: RR15HHE Free Lift Rated capacity: 1.5 t Model: 500E Weight incl. battery: 1,155 kg Drive: Electric Tyres: Polyurethane Dimensions Overall length: 1,975 mm Overall width: 820 mm Length incl. fork back: 905 mm Lift height: 5,000 mm Free lift: 1,740 mm Mast height (retracted): 2,214 mm Mast height (extended): 5,510 mm Fork dimensions DIN ISO 2331: 60 mm x 170 mm x 1,150 mm Fork outside spread: 570 mm Working aisle width (pallet 800x1200 longitudinal): 2,450 mm Turning radius: 1,575 mm Performance Drive speed, laden/unladen: 5.8 km/h / 6.0 km/h Lifting speed, laden/unladen: 0.09 m/s / 0.16 m/s Lowering speed, laden/unladen: 0.15 m/s / 0.16 m/s Max. gradeability, laden/unladen: 6% / 15% Do you prefer to finance or lease this equipment? No problem! We also offer attractive options for financing and leasing. Contact us for more information—we look forward to your inquiry!

Kondisi: baik (bekas), Penarik multifungsi, penarik kabel, alat angkat, penarik untuk pemasangan, penarik kabel universal, perangkat penarik kabel, kabel baja untuk penarik Bwjdpfxexbx R Ie An Hjw -Kabel baja: untuk penarik multifungsi -Diameter kabel: 11 mm -Panjang: 20 m -Jumlah: 3x kabel baja tersedia -Harga: per buah -Dimensi transportasi: Ø 440 x 110 mm / Ø 430 x 95 mm -Berat: 10,7 kg / 11 kg