Kotak susun

Schäfer 9000 St. SSI Schäfer Kunststoffkiste EF4

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, daya: 55,4 kW (75,32 hp), berat keseluruhan: 2.050 kg, jenis bahan bakar: diesel, warna: original, konfigurasi gandar: 1 as, berat operasi: 2.050 kg, berat kosong: 2.050 kg, bahan bakar: diesel, Technical Data: Round timber up to 24 cm Feed width: 300 mm Base weight approx. 2,050 kg Year of manufacture: 2022 4-cylinder Hatz turbo-diesel engine With common rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo-diesel engine 55 kW (74.8 hp) with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Drawbar with overrun brake Front jockey wheel Rear support stand Lighting according to German Road Traffic Licensing Regulations (StVZO), impact-protected Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed, thus controlling chip size Chipper knives can be re-sharpened several times (approx. 10x) for long service life PowerGrip feed roller, 300 mm wide, with hydraulic feed Especially grippy, aggressive and consistent feed: each roller has its own hydraulic motor Discharge chute with adjustable deflector, swivelable Discharge chute mounted on ball-bearing slewing ring Relevant machine parts soundproofed Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo-diesel engine with DPF, delivering 55.4 kW (75.3 hp). Automatic industrial overrunning clutch between engine and chipper disc, protecting engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV approval. Robust, fixed steel mudguards. Provision for front jockey wheel and rear support stand. Height-adjustable drawbar with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting system per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU type approval (homologation). Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Folding feed hopper with minimum feed depth 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): Width = 1,160 mm, Height = 1,040 mm. Swivelable discharge chute with adjustable deflector. Lsdpsv Evx Usfx Adnsrh Discharge chute on ball-bearing slewing ring for flexible positioning. Sound insulation on relevant machine parts such as chipper hood and discharge chute. Emergency stop button on top of hopper and on the side of the hopper flap. Chipping Unit: Safety system in accordance with EN 13525. Chipper disc diameter Ø 800 mm, thickness 40 mm. Closed knife system for quick and safe knife changes. Continuously adjustable chipper knives, can be resharpened multiple times for extended service life. Horizontal counter blade can be used 4 times and vertical shear bar 2 times for long service life. Wrap protection at the main bearing of the chipper disc. Hydraulic Feed: Feed control with independent hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for grippy and consistent material transport. Parallel guide of the upper roller for even feed without misalignment. Hydraulic adjustment of feed speed to control chip size. Hydraulic oil tank level indicator.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication Lrodpfx Asgpxc Sodnoh - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: baru, High-performance thread tapping machine with leadscrew setup. Safety device against tool breakage. Programs for single-cycle and continuous operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single-cycle mode. Simple leadscrew change via quick-release coupling. Lrsdpfx Adjfrlndeneh Standard drilling capacity: 15 mm Thread cutting capacity: M3 - M10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Distance spindle/table: 185 to 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Mains connection: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm / 560 rpm / 1,000 rpm / 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column 200 mm longer: 14154

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: Lrsdpfxsfxyhfj Adneh The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, MAXION BT 20 Bench Drill Powerful MK2 machine featuring an easy-scroll control wheel and a large display. Digital drilling depth, piece counter, fine adjustment for drilling depth, and an LED lamp are all standard features. The new BT20 thus combines innovative features with proven drive technology. Technical Data: - Drilling capacity: 20 mm - Tapping capacity: M16 - Spindle: MK2 - Drilling depth: 100 mm - Throat depth: 215 mm - Distance spindle/base plate: 185 - 541 mm - Table dimensions: 340 x 445 mm - T-slot width: 12 mm - Column diameter: 90 mm Lrjdpfof Nrbfsx Adnsh - Overall height: 990 mm - Weight: 120 kg - Pole-change motor: 0.6/1.2 kW - Power connection: 400 V/50 Hz Two spindle speeds available: MAXION BT 20 (M00027): - Infinitely variable spindle speed: 100 - 1,800 rpm MAXION BT 20 (M00028): - Infinitely variable spindle speed: 240 - 3,600 rpm Optional accessories: - Drilling package - Tapping unit with digital depth display - 200 mm longer column - Cross table MF3 - Base cabinet - Electric cooling unit Note: ALSO AVAILABLE AS A COLUMN DRILL PRESS

Kondisi: baru, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height range: 95–240 mm Table size: 160 x 110 mm Spindle diameter: 25 mm Machine weight approx.: 27 kg Dimensions (L x W x H): 160 x 230 mm Lrodefv Awaspfx Adnsh Direct Acting Pneumatic Presses These presses deliver full pressing force over the entire stroke length. They are primarily used when long-stroke parts require processing with constant force. Outstanding Features: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinders with end-position cushioning on both sides • Double guide rings in the piston ensure smooth and consistent operation • Oil-resistant sealing elements Special Features of the PND Series: • Spindle secured against rotation • On the PND 85/S, spindle return is carried out via only one cylinder chamber—resulting in additional air savings • Fine adjustment of working height is easy, fast, and precise in two stages: – Basic setting by simply loosening the clamping screws on the stand – Precision fine-tuning via the stroke limitation ring on the piston rod Additional Advantage: Faster cycle times and air savings

Kondisi: bekas, Tahun pembuatan: 2024, jam operasional: 56 h, kapasitas angkut: 200 kg, tinggi angkat: 10.000 mm, berat kosong: 2.680 kg, tinggi konstruksi: 1.990 mm, jenis bahan bakar: listrik, panjang total: 2.800 mm, jenis penggerak: Elektro, lebar konstruksi: 1.000 mm, tinggi kerja: 10.000 mm, Platform angkat vertikal Ukuran ban depan: 16x5 Ukuran ban belakang: 16x5 Tegangan baterai: 24V Kapasitas baterai: 250Ah Produsen baterai: Haulotte Lsdpfx Ajvymbiednjrh No. pengisi daya: ST413

Kondisi: bekas, Tahun pembuatan: 2007, Press force 100 t Stroke 500 mm Table dimensions 900 x 600 mm Rapid traverse 22 mm/s Stroke speed 2 mm/s Ram surface 700 x 350 mm Lodpfx Ajvprv Rodnerh Total power requirement 2.2 kW Machine weight approx. 1.6 t Space requirement approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press The machine is an Italian brand, SICMI, distributed by Knuth.

Kondisi: baru, Pressure 25 t Throat depth 200 mm Stroke 4 - 80 mm Table size 520 x 400 mm Strokes 160 strokes/min Continuous working capacity 1370 Nm Single-stroke working capacity 2740 Nm Stroke adjustment 4 - 80 mm Ram adjustment 40 mm Ram surface 160 x 160 mm Table pass-through opening 200 x 150 mm Clamping plate 500 x 380 x 60 mm Table pass-through opening 80 mm Machine weight approx. 1.9 t Lsdpfx Aeb U Hwnsdnerh - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Table height adjustable - Control cabinet with touchscreen - Foot switch

Kondisi: sangat baik (bekas), Double-head projection welding machine DALEX PMS 14-4 Nominal throat depth: 350 mm Rated power at 50% duty cycle: 160 kVA Secondary short-circuit current: 79.4 kA Secondary open-circuit voltage: 5.8 - 9.74 V Electrode force: 120-720 daN Equipped with 2 double-stroke cylinders with approach stroke Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring belt Cylinders can be operated in cascade or simultaneous mode Weight: 1090 kg Lodpfx Ajd Ip Alsdnjrh Machine is currently being refurbished