Pukulan multifungsi

Schüco 296 570.234.4.12.0193.A1

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. Cjdpfx Aofxyhfea Tspw The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Cpodpfx Ask Hdu Dsa Tjw X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 – 3,150 rpm Stepless feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with traverse control, mechanical handwheels, rotatable tilting table ±45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic transmission - Automatic clamping on X, Y, and Z axes - Central automatic lubrication - Coolant system - Direct path measurement - Collision protection coupling on Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool trolley Cpjdpjwhk Ubjfx Aa Tsw Specifications Working Area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main Drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse - Power: 3.7 / 4.4 kW - Spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed Drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table Slide: - T-slots quantity: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Footprint (with safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 10.120 h, panjang total: 1.800 mm, tinggi total: 1.700 mm, lebar total: 1.200 mm, de-hu-001 Cpsdswh Na Nopfx Aa Tew

Kondisi: siap digunakan (bekas), With hydraulic pump. Csdpfx Ashw E D Soa Topw

Kondisi: bekas, Tahun pembuatan: 1991, panjang total: 1.520 mm, lebar total: 720 mm, daya: 30 kW (40,79 hp), Telah sepenuhnya direkondisi, dilumasi, dan siap beroperasi. Shredder hidrolik otomatis dengan dua poros ini dirancang untuk menghancurkan dan memisahkan serpihan logam, plastik, kayu, kabel listrik, dan berbagai material lainnya. Dikendalikan oleh PLC yang memantau sensor-sensor, mengelola rotasi poros, serta secara otomatis mengaktifkan fungsi mundur; jika terjadi beberapa penyumbatan dalam waktu singkat, mesin akan mati otomatis. Selain itu, unit akan otomatis mati setelah periode tertentu saat beroperasi tanpa beban. Sorotan Teknis: Daya: 30 kW Tekanan hidrolik maksimum: 250 bar Torsi: 11.780 Nm 2 poros penghancur dengan pisau Penggerak hidrolik dengan transmisi roda gigi (Valmet BB 3150CC) Cpodpswk Egwefx Aa Tjw Penyesuaian tekanan pisau otomatis (sistem pegas cakram)

Kondisi: bekas, Tahun pembuatan: 1995, Mesin Frais CNC Universal Produsen: HERMLE Tipe: UWF 902 H Tahun pembuatan: 1995 Jam operasi: 46.680 Kontrol: HEIDENHAIN TNC 426 Perjalanan sumbu X/Y/Z: 600 x 450 x 500 mm Meja sudut: 900 x 458 mm Probe 3D Renishaw Rentang putaran: 20 hingga 6.300 rpm Cpodpfxov Rpr So Aa Tow Konektor alat: SK 40 Tangki pendingin Daya penggerak: 8,6 kW Berat sekitar: 4.500 kg Dimensi mesin PxLxT sekitar: 2.950 x 2.200 x 2.300 mm

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Cjdpfx Aju Nlkxja Tjpw

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 450 mm, panjang umpan sumbu Y: 300 mm, panjang umpan sumbu Z: 350 mm, Layar digital 3-sumbu Spindel frais horisontal dan vertikal Pinol Cedpfx Aaswyit He Tjpw Data teknis: Pergerakan memanjang X: 450 mm Pergerakan melintang Y: 300 mm Pergerakan vertikal Z: 350 mm Ukuran meja: 800x400 mm Taper spindel: SK40 Kisaran putaran: 50-2500 rpm Kisaran feeding: 8-400 mm/menit Daya motor: 3,2 kW Berat mesin: 1500 kg Data teknis, aksesori, dan deskripsi mesin tidak mengikat.

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm Cjdpfepug D Esx Aa Tspw - Adjustable-angle support vise: 90° to 30° - Belt speed: 15 + 30 m/sec - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg