Gergaji bundar untuk logam ringan dan aluminium

MEP COBRA 352 NC 5.0

Kondisi: baru, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 105 mm Cutting capacity at 90 degrees (flat): 180 x 70 mm Cutting capacity at 45 degrees (round): 120/110 mm Cutting capacity at 45 degrees (square): 10/95 mm Cutting capacity at 45 degrees (flat): 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m Iodjfg Rlgepfx Ab Isa COBRA 352 NC 5.0, automatic circular saw with semi-automatic operation, suitable for cutting aluminium and light metal alloys using carbide-tipped circular saw blades. Miter saw for angle cuts from 45° right to 45° left. The vertical orientation allows for sawing operations with the saw head tilted between 0° and 45° to the left. Numerically controlled circular saw machine with the new Windows CE-based control system, specifically developed by MEP for automatic machines.

Kondisi: baru, Saw blade diameter 350 x 32 mm Cutting capacity at 90°: round 120 mm Cutting capacity at 90°: square 105 x 105 mm Cutting capacity at 90°: flat 180 x 70 mm Cutting capacity at 45°: round 120 / 110 mm Cutting capacity at 45°: square 100x100 / 95x95 mm Cutting capacity at 45°: flat 135 x 60 mm Spindle speed: 1700 / 3400 rpm Control: MEP CNC Total power requirement: 2.6 / 3.5 kW Machine weight approx.: 605 kg Dimensions (L x W x H): 2210 x 1680 x 2150 mm Equipment: - Fully automatic high-performance CNC circular saw * for cuts from 45° right to 45° left * designed for aluminium and light alloy materials - MEP microprocessor control * Windows “CE” based control system * User-friendly interface * Storage capacity for up to 100 cutting programs * Operator interface with 7” touchscreen display and mechanical keys * Swiveling control panel * Display and storage of alarm and error messages * Saw head positioning and feeder movement via joystick * Automatic detection of cutting start position - Material feed with stepper motor and ball screw drive * Travel: 600 mm * Repeatable for cutting any length - Manually operated safety hood - Mechanical stops at -45°, 0°, +45° Isdpfx Aboxaa Uxo Iea * Enable rapid positioning of the saw head - Pneumatic vice system * 2x pneumatic frontal vices * Includes vertical clamp - Heavy cast iron frame for vibration-free operation & highest precision - Saw head can additionally tilt up to 45° - 2 cutting speeds - Base frame with lockable door - Coolant system (emulsion oil lubrication) - Machine base with forklift pockets - Comprehensive operation manual, maintenance handbook, etc.

Kondisi: baru, MEP COBRA 352 NC 5.0 [Fully Automatic] Article Number CB352NC 5.0 Motor Power 2.6/3.5 kW Vise Opening 180 mm Band Dimensions 350x32x3.4 mm Weight 600 kg Speed 1700/3400 rpm Cutting Capacity 0° 120 / 105 / 180x70 mm Cutting Capacity 45° right 120 / 100 / 135x60 mm Cutting Capacity 45° left Cutting Capacity 60° right Cutting Capacity 60° left Description Mitre cutting automatic saw with semi-automatic function for cutting aluminium and light metal alloys. Mitre cuts from 45° right to 45° left, with the saw head swivelling 0°-45° to the left. Control is via multi-microprocessor units, while two NC-controlled axes allow up to 1,000 different cutting programs to be stored, each with variable quantities and lengths, for the same material. -New centralized control panel on an articulated arm, allowing operation from any working position and immediate access to the emergency stop at all times. -Fieldbus communication system with dual microprocessor and serial port. -Display with 20 characters x 4 lines for real-time indication of the following technical parameters: number of programmed and completed cuts, saw blade thickness, feed length, cutting time, ammeter, and over 100 diagnostic messages and warnings. Ijdjchkwhepfx Ab Iea -New – Alarm and error message logging with event history display. New – 600 mm material feed with drive motor and ball screw, mounted on opposing ball bearings. -New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised buttons and activation LED. -Stroke of saw bow programmable directly from the control panel to adapt to cutting material. -Ball bearing mounted turntable for easy and precise rotation. -Clamping system with two front-end vises, positionable along the length of the part. -Adjustable mechanical stops for rapid head positioning at 0 and 45 degrees both left and right. For further technical data, please refer to the attached PDF document (page 3 of the catalog excerpt).