Mesin frais tipe kolom bergerak, x=7m, kontrol Siemens 840D

Scharmann EcoCut 1.6 XZ

Kondisi: bekas, Tahun pembuatan: 2013, A 4-axis CNC machining center from Spinner is available. Travel range X/Y/Z: 1600mm/810mm/700mm, rapid traverse X/Y: 18m/min, rapid traverse Z: 15m/min, table dimensions X/Y: 1800mm/810mm, max. table load: 2000kg, spindle speed: 10,000 rpm, power: 22kW, tool holder: SK40, tool stations: 24, weight: approx. 8,000kg. Documentation available. An on-site inspection is possible. Gsdpfxswqd R Uj Agroiu

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of turrets: 1 - Number of axes: 6 MAIN SPINDLE - Spindle nose: A2-8 - Max. bar diameter: 80 [mm] - Spindle drive power: 18.5 [kW] - Spindle speed: 4,000 [rpm] - Max. machinable diameter: 460 [mm] - Minimum C-axis resolution: 0.001 [degrees] TURRET - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260 x 795 [mm] - Y-axis travel: +/- 50 [mm] - Driven tool speed: 6,000 [rpm] - Driven tool power: 5.5 [kW] SUBSPINDLE - Spindle nose: A2-5 - Max. bar diameter: 51 [mm] - Max. machinable diameter: 190 [mm] - Spindle drive power: 11 [kW] - Spindle speed: 6,000 [rpm] - Minimum C-axis resolution: 0.001 [degrees] - Travel: 760 [mm] Giodpfex Tvkrjx Agrsu ELECTRICAL SUPPLY - Supply voltage: 200 [V] - Total drive capacity: 42 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 4,414 x 2,370 [mm] - Machine height: 2,115 [mm] - Machine weight: 6,200 [kg] MACHINE HOURS - Power-on hours: 15,525 [h] - Operating hours: 12,865 [h] EQUIPMENT - CNC Control: Mitsubishi MSX-850II - Teach-in programming: MAPPS III - Interfaces: USB / PCMCIA / RJ45 - Tool measuring probe: Renishaw - 3-colour status lamp - Tailstock function - Coolant tank - Chip conveyor: right - Spindle cooling - Parts catcher - Bar loader: LNS Quick LoadSERVO 80 - Parts conveyor - Number of driven tool holders: 2 - Number of stationary tool holders: 10 - 3-jaw chuck

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 12.244 h, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 740 mm, daya motor spindle: 11.000 W, tinggi total: 1.620 mm, berat keseluruhan: 4.200 kg, produsen pengendali: SIEMENS, model controller: 840D-SolutionLine, jumlah sumbu: 2, This 2-axis horizontal lathe SPINNER TC 600-65MC was manufactured in 2015 and is equipped with a Siemens 840D control system and a 16-station turret. It features a main spindle with speeds up to 4,000 rpm and a power output of 24 kW. The machine offers a swing diameter over the bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to purchase this SPINNER TC 600-65MC horizontal lathe. Contact us for further details about this machine. Additional Equipment • Full enclosure splash guard + coolant system • Work area lighting + pneumatic equipment • Panoramic window for optimal visibility of the working area Machine Advantages Technical Advantages • Centre distance: approx. 600 mm • Maximum turning diameter: 310 mm • Spindle torque: main spindle (Fanuc, S6 40%) 178 Nm, main spindle (Siemens, S6 40%) 301 Nm • Quill stroke: 120 mm • Travel: 475 mm • Speed of driven tools: 6,000 rpm • Driven tool power: (Fanuc, 30 min) 3.7 kW, (Siemens, 40%) 6.0 kW Giodpfx Aex D E Hnogrsu Additional Information Media Pneumatics max. operating pressure: 10 bar Standard pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feeder (electric)

Kondisi: bekas, Tahun pembuatan: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control: FANUC Total power requirement: 12 kW Machine weight approx. 2300 kg Space requirement approx. ... m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Work area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240-540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 - 6,000 rpm Feed rates / rapid traverse max.: up to 1,000-4,000 mm/min / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Gijdpfot Hw H Eox Agreu Milling in aluminium: 500 cm³ AC main drive approx. 3.7 / 5.5 kW Total power approx. 12 kW - 380 V - 50 Hz Weight approx. 2,300 kg Accessories / special equipment: • Original FANUC control with screen and all modern subroutines, error diagnosis, electronic handwheel, RS 232, easy and fast programming, directly at the machine, etc. • Vertical turret head with 10 tool stations ISO 40, fast tool change time approx. 7 seconds chip-to-chip, • CNC-controlled rotary table mounted on the table (not a CNC axis), ideal as an indexing table, hydraulic, Type RST 2 • Separate coolant system • Various tool holders with and without tools Ideal machine for productive drilling, tapping, and milling in steel and aluminium. Condition: good to very good – demonstration-ready, under power. Delivery: immediate ex stock, loaded free onto truck. Payment: strictly net – upon receipt of invoice. We look forward to your order. We always have a large selection of all types of CNC machining centers in stock – please ask for alternatives!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Manufacturer: Spinner Model: TC-400 Year of manufacture: 2014 Control system: Fanuc 32iTB Max. bar capacity: Ø 52 mm Equipment: - Short bar loader Spinner Servo-Load 80-1500V2 with storage rack - Control: Fanuc 32iTB with color LCD screen / control panel 1 - Drive motors for X/Z axes and spindle by GE Fanuc, digital AC technology - Travel ranges: X = 200 mm, Z = 515 mm - Main spindle up to 5,000 rpm / 52 mm; power 18 kW; torque 113 Nm (S6 = 40%) - Built-in spindle motor with water cooling, spindle nose A6 - C-axis for spindle incl. software option "Transmit" for face machining and "cylindrical interpolation" for peripheral machining - Hydraulic hollow clamping cylinder - 12-position turret for tool holders, per DIN 69880/30mm - 12 driven tool stations with turret for milling and drilling operations - Tailstock for TC400, Morse taper MK4 - Chip conveyor for TC400, with enlarged, L-shaped coolant tank, approx. 150 liters with centrifugal pump 50l/min, 3.3 bar - Parts catcher - Tool measuring arm - High-pressure pump - Electrostatic air cleaner Giedswwucuspfx Agreu

Kondisi: bekas, Tahun pembuatan: 2001, de-hu-01 Gijdoxwdw Ejpfx Agreu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 17.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 720 mm, gerak cepat sumbu X: 100 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, produsen pengendali: HEIDENHAIN, model controller: I TNC 530, kecepatan spindel (maks.): 18.000 rpm, jam operasional spindle: 17.000 h, hidung spindel: BT 40, jumlah slot dalam magazin alat: 60, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Pusat pemesinan vertikal dengan bed bergerak 5 sumbu kontinu, dengan meja putar (dapat dipasang secara horizontal maupun vertikal) diameter 550 mm. Tersedia opsi pengoperasian pendulum (seperti pergantian palet) dengan sekat khusus. Dilengkapi presetting BLUM laser control NT. Probe benda kerja nirkabel HEIDENHAIN TS 642. Conveyor serbuk berbasis sabuk. Pendingin melalui spindle bertekanan tinggi dengan filter kertas. Pendingin jalur spindle. Handwheel jarak jauh HEIDENHAIN. Gedpfx Agjy Diabsreiu

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Description: The machine is in good technical condition and can be inspected upon prior arrangement. Equipped with the Siemens Shopturn system, including a loader, and fully equipped. BASIC PARAMETERS Working Area - Max. turning diameter Ø: approx. 410–500 mm - Max. length: 800 mm - Distance between spindles: approx. 1020 mm - Swing over bed: approx. 700 mm - Realistic applications: ideal for shafts, flanges, and components up to approx. 800 mm Giodey Rgafjpfx Agreu Travels (axes) - X-axis: approx. 480 mm - Y-axis: approx. 100 mm - Z-axis: approx. 800–845 mm - B-axis: approx. 110° (5-axis machining) - C-axis: 360° (indexing + interpolation) This makes it a fully-fledged turn-mill center (not a standard lathe). Spindles - Main spindle: - Speed: approx. 5000 rpm - Power: approx. 25–34 kW - Bar capacity: approx. 76–87 mm - Sub-spindle: - Speed: approx. 6000 rpm - Milling spindle (main difference compared to a conventional lathe): - Speed: up to 12,000 – 20,000 rpm - Power: approx. 19–22 kW - Taper: HSK-A63 or Capto C6 - Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System - Magazine: 24 – 48 tools - Live tools: yes (fully integrated) Control System - Siemens 840D sl + CELOS (most common) Weight and Dimensions - Weight: approx. 10,000 kg - Dimensions: approx. 6.5 × 2.7 × 2.0 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 100 h, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.800 mm, berat keseluruhan: 2.200 kg, produsen pengendali: FANUC, model controller: 31t- Model B, jumlah sumbu: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control system and a double spindle arrangement with C and Y axes for complex machining operations. Equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length, this machine is ideal for precision turning and milling applications, providing a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loader with adjustable part length and bar diameter • Remnant extraction system • Polyurethane plastic guide channel • Longitudinal movement displacement system Advantages of the Machine Qualitative Machine Advantages • No spindle reduction required Technical Machine Advantages • Cooling: Thermo-compensation unit • Axes: C axis and Y axis • System: Linear guideway system, digital drive system • PART CATCHER: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are conveyed into a collection box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm, max. finished part diameter: 65 mm. • Tool system: 12-position tool turret, VDI30 radial • Driven tools: up to 12 driven tools • Sub spindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Bar passage diameter: 20 - 65 mm • Feed rate: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and fault diagnosis (display output) Tools Max power: 6.7 kW Max torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Compressed air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The installation kit includes vibration-dampening, height-adjustable leveling pads and mounting brackets. Machine history Note: Machine as new with only 100 operating hours Dimensions Machine depth 4500 mm Giodpox D H Sfofx Agrou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, produsen pengendali: HEIDENHAIN, model controller: HEIDENHAIN TNC-620, tinggi total: 2.500 mm, panjang total: 3.600 mm, lebar total: 2.500 mm, lebar meja: 1.000 mm, panjang meja: 450 mm, beban meja: 600 kg, berat keseluruhan: 5.000 kg, kecepatan spindel (min.): 80 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, USATO vertical machining center "DOOSAN DNM 4500" with Heidenhain TNC-620 CNC control Gisdpfx Asw D Dy Nogrou