SISTEM SUDUT GERGAJI DIVISI PANEL

SCHELLING AH 8 (580) mm 5600 x 2700

Kondisi: sangat baik (bekas), Für Platten mit den Abmessungen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm 2 Stück Doppel-Einlaufrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang Hydraulischer Hubtisch (ca. 5600 x 2700 mm) System mit Gummirädern (11 oben + 11 unten) zur Plattenandruck/-förderung Verfahrbare Traverse mit 45 Saugern und 5 Anschlägen (zur Plattenstapelausrichtung) 1. Rückseite – Schieber mit 11 Spannern Drehtisch (90° Plattendrehung) mit Kunststoffrädern 1. Plattensäge AH8 580 – max. Schnittbreite 5.600 mm (max. Sägeblattüberstand 165 mm) Vorritzaggregat (max. Sägeblattdurchmesser / Leistung) ca. 200 mm (ca. 2,2 kW) Hauptsägewelle (max. Sägeblattdurchmesser / Leistung) 520 mm (32 kW) Nsdpsxvc Rzjfx Aahedf Verstellbare Fahrgeschwindigkeit des Sägenschlittens (m/min) 0–150 Verfahrbares Queranschlaglineal mit 7 Schiebern für geschnittene Platten Mit 4 Anschlägen (zur Plattenstapelausrichtung) und 3 motorisierten Ketten 2. Rückseite – Schieber mit 25 (27) Spannern/Greifern 2. Plattensäge – max. Schnittbreite 2.700 mm (max. Sägeblattüberstand 165 mm) Vorritzaggregat (max. Sägeblattdurchmesser / Leistung) ca. 200 mm (ca. 2,2 kW) Hauptsägewelle (max. Sägeblattdurchmesser / Leistung) 520 mm (32 kW) Verstellbare Fahrgeschwindigkeit des Sägenschlittens (m/min) 0–150 Abfallentsorgungssystem mit Zerkleinerer VECOPLAN (55 kW) Auslaufstation für geschnittene Platten mit kunststoffbeschichteter Rollentischauflage Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftblas-System 400 x 6.300 mm + 8 Hubtischen (4 x 1.300 x 1.600 mm, 4 x 1.300 x 1.410 mm) – Gesamtanschlusswert 130 kVA

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) Nsdpfxsvvkfdo Aahsdf BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas),

Kondisi: bekas, Tahun pembuatan: 2019, Edge control, numerical control. Panel height min-max: 6 - 60 mm. PVC/ABS up to 3 mm. Minimum panel length/width: 140/60 mm. Feed speed up to 10 / 25 m/min, continuous. Working height electronically adjustable by CNC. Side roller track with return rollers for panel support. Rectifying unit with 2 motors. Coil holder plate. Glue unit for EVA/PUR glue, suitable for cartridge or granulate system. Edge pressure group for straight profiles with electronically adjustable pressure rollers (CNC). End cutting unit with 2 motors. Trimming unit with 2 tilt motors, electronically adjustable by CNC. Corner rounding unit with 4 multifunction motors (corner trimming + rounding), numerically controlled, automatic. Scraper unit with electronic control, CNC. Glue scraper group. Brushing unit. Machine length approx. 6500 mm. Weight approx. 2750 kg. Nsdowwhn Depfx Aahsdf

Kondisi: seperti baru (mesin pameran), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE. The line consists of the following machines: VZ0200A) Infeed station with double loading unit “BARGSTEDT” Model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge-banding machine “HOMAG” Model KFL 525/8/A3/15 VZ0200C) Turnover station (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDL 310/30/12 VZ0200D) 2nd double-sided sizing and edge-banding machine “HOMAG” Model KFL 526/10/A3/30 VZ0200E) Turnover station (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDL 510/25/12 Nsdpfsdt Rgvjx Aahodf VZ0200F) Sword brush “WANDRES” VZ0200G) Stacking station with double buffer unit “BARGSTEDT” Model TSP 410/D/25/12

Kondisi: baik (bekas), Tahun pembuatan: 2007, deu-TECHNISCHE_DATEN-Max_bearbeitbare_Laenge_3200_mm_Min_bearbei tbare_Laenge_200_mm_Max_Breite_200_mm_Min_Breite_40_mm_Max_Werkst ueckhoehe_130_mm_Tiefe_bei_max_Tenonierstift_Durchmesser_320_mm_1 05_mm_Tenonierwagen_Geschwindigkeit_min_max_0_100_m_min_Profilier geschwindigkeit_min_max_3_15_m_min__TENONIEREN_1_Stirnschnittsaeg e_5_5_PS_4_kW_Saegeblatt_D_400_mm_2_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_3_Tenonierfraeser_Gegenlager_50 _x_620_mm_15_PS_11_3_kW_Max_Werkzeugdurchmesser_320_mm_Achshub_57 5_mm_Automatischer_Ausrei_sschutz_Vertikale_Positionierung_mit_du rchgehender_Achse_4_Digitale_Winkelverstellungsspannvorrichtung_P ROFILIEREN_5_Profilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5 _kW_Werkzeugdurchmesser_130_240_mm_Achshub_280_mm_Zeitversetzter_ Anti_Ausbraakschutz_bei_Kalibrierung_Doppelte_Drehrichtung_Vertik ale_und_horizontale_Positionierung_mit_durchgehender_Achse_6_Prof ilierfraeser_rechts_Schaft_50_x_320_mm_10_PS_7_5_kW_Werkzeugdurch messer_130_240_mm_Achshub_280_mm_Vertikale_und_horizontale_Positi onierung_mit_durchgehender_Achse_7_Profilierfraeser_rechts_Schaft _50_x_320_mm_10_PS_7_5_kW_Werkzeugdurchmesser_130_240_mm_Vertikal e_und_horizontale_Positionierung_mit_durchgehender_Achse_8_Restte ilrueckgewinnungsgruppe_Vertikale_und_horizontale_Positionierung_ mit_durchgehender_Achse_Vorrichtung_zum_Fluegelauszug_Hfutwt78Z_9 _Untere_horizontale_Nutwelle_Vertikale_und_horizontale_Positionie rung_mit_durchgehender_Achse_88_5_PS_66_4_kW_10_Digitale_Fuehrung _11_Ruecklauf_der_Werkstuecke_zum_Bediener Nedpfot R T Hcsx Aahodf

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) Nodpfjiidm Njx Aahodf - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: bekas, Tahun pembuatan: 2022, Used machine Year of manufacture: 2022 Condition: as new Comes with 6 months full warranty! Only 70 operating hours; machine has not yet been used in production! Equipment and Technical Specifications: BASIC MACHINE Holz-Her Machining Center DYNESTIC 7535 10.5 Lift Processing length: 3100 mm Machine frame of welded construction with ground and hardened prism guides for the gantry, aggregates head, and consoles Gantry design of the traveling stand Rack and pinion drive, helical gearing, in X and Y axes, 1 ball screw drive in Z axis for precise positioning MATRIX Table Fixed, continuous processing table with grid partitioning, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meter sealing cord for clamping the sacrificial plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable. 2 stop rails each in Y direction and 1 stop in X direction on the right (when viewing from the front of the machine) Remote maintenance Integrated network card for transferring control and program data. Data transfer via high-speed internet connection Requirement: high-speed internet connection at the machine USB Interface for data backup or direct import of machining programs at the control panel Ndsdpfx Aswxz Uyjahof TECHNICAL DATA Machining dimensions 7535 10.5: Max. nesting table workpiece size: X = 3100 mm Y = 1560 mm Max. travel paths: X = 4695 mm Y = 2305 mm Z = 565 mm Max. machining height 7535/7735 Classic without pusher: Z = 300 mm from table top (without sacrificial plate) Max. pusher clearance height above table for Push/Auto/Lift versions: Z = 250 mm from table top (without sacrificial plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min MACHINE CONTROL SOFTWARE CAMPUS V7 PLUS CAD/CAM software 1 x license incl. material removal simulation BetterSim 1 software license secured with dongle for the machine CAMPUS V7 PLUS, software for CNC machining centers: Includes: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WOP and CAD/CAM features for creating part variants using macro technology Hi-Speed USB-Device Network Server Allows use of the CAMPUS single license on the machine or a PC in the same network Only one license can be used in the network at a time! Additionally: CAMPUS V7 PLUS CAD/CAM software 1 x license incl. material removal simulation BetterSim 1 software license secured with dongle for office or machine CAMPUS V7 PLUS, software for CNC machining centers: Includes: 1. CAMPUS NC-HOPS 2. CAMPUS aCADemy 3. CAMPUS MT-Manager 4. CAMPUS Workcenter V7 PLUS 5. CAMPUS 3D material removal simulation BetterSim CAMPUS NC-HOPS Graphical variant system with WO

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Safe and responsible packaging – just in time. The CORBOX cardboard cutting machine manufactures resource-efficient packaging. The CORBOX produces custom-sized cartons fully automatically and just in time. Raw materials are used responsibly in a dynamic process, significantly reducing the amount of packaging and filling material required. Nsdpfx Aaekthncshjdf Produce exactly the packaging you need with the CORBOX – optimally shaped, with maximum volume utilization and the lowest possible unit costs.

Kondisi: sangat baik (bekas), Horizontal panel dividing saw with rear lift table Control: MCS Evolution Software included Powered roller conveyors (approx. 4500 x 2200 mm) Lift table (4300 x 2200 mm) Panel rotation device (for 90° rotation) No. 2 rear pushers (1 with clamping grippers) Program pusher division No. 10 clamping grippers Max. cutting width (mm): 4300 Useful stroke of pusher (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening width (mm): 133 Scoring saw (max. blade diameter) mm: 20 Main saw (max. blade diameter / power) mm: 460 - kW: 27 Adjustable saw carriage feed rate (m/min): 0 - 150 No. 4 front air cushion tables Ndsdpfx Aaoq Rfahohsf Total connected load (kW): approx. 36